Ammonium hydrosulfide

(Redirected from Ammonium sulfide)

Ammonium hydrosulfide is the chemical compound with the formula [NH4]SH.

Ammonium hydrosulfide
Names
IUPAC name
ammonium hydrosulfide
Other names
ammonium bisulfide
ammonium hydrogen sulfide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.031.974 Edit this at Wikidata
EC Number
  • 235-184-3
RTECS number
  • BS4900000
UNII
UN number 2683
  • InChI=1S/H3N.H2S/h1H3;1H2 checkY
    Key: HIVLDXAAFGCOFU-UHFFFAOYSA-N checkY
  • InChI=1/H3N.H2S/h1H3;1H2
    Key: HIVLDXAAFGCOFU-UHFFFAOYAU
  • [SH-].[NH4+]
Properties
[NH4]SH
Molar mass 51.111 g/mol
Appearance Yellow-orange fuming liquid (in solution). White rhombic crystals (anhydrous).[1]
Density 1.17 g/cm3[1][2]
Boiling point 56.6 °C (133.9 °F; 329.8 K)
Miscible
Solubility soluble in alcohol, liquid ammonia, liquid hydrogen sulfide; insoluble in benzene, hexane and ether
1.74
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Toxic
GHS labelling:
GHS05: CorrosiveGHS09: Environmental hazard
Danger
H314, H400.
P260, P264, P273, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P391, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability (yellow): no hazard codeSpecial hazards (white): no code
3
3
Lethal dose or concentration (LD, LC):
168 mg/kg (rat, oral)[3]
Related compounds
Other anions
Ammonia solution
Other cations
Sodium hydrosulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Composition

edit

It is the salt derived from the ammonium cation and the hydrosulfide anion. The salt exists as colourless, water-soluble, micaceous crystals. On Earth the compound is encountered mainly as a solution, not as the solid, but [NH4]SH ice is believed to be a substantial component of the cloud decks of the gas-giant planets Jupiter and Saturn, with sulfur produced by its photolysis responsible for the color of some of those planets' clouds. It can be generated by mixing hydrogen sulfide and ammonia.

Preparation

edit

Solutions of ammonium hydrosulfide can be prepared by passing hydrogen sulfide gas through concentrated ammonia solution.[4] According to a detailed 1895 report, hydrogen sulfide reacts with concentrated aqueous ammonia solution at room temperature to give [NH4]2S·2[NH4]SH. When this species is cooled to 0 °C and treated with additional hydrogen sulfide, one obtains [NH4]2S·12[NH4]SH.[5] An ice-cold solution of this substance kept at 0 °C and having hydrogen sulfide continually passed through it gives the hydrosulfide.

The common "stink bomb" consists of an aqueous solution of ammonium sulfide. The mixture easily converts to ammonia and hydrogen sulfide gases. This conversion illustrates the ease of the following equilibrium:

[NH4]SH ⇌ NH3 + H2S

Ammonia and hydrogen sulfide each have a powerful and unpleasant smell.

Solid ammonium hydrosulfide can be produced by reacting an equimolar mixture of ammonia and hydrogen sulfide under -18 °C:[6]

NH3 + H2S → NH4SH

"Ammonium sulfide"

edit
 
A bottle of ammonium sulfide solution

Aqueous solutions of ammonium sulfide (CAS registry number 12135-76-1 ), also known as diammonium sulfide are commercially available, although the composition of these solutions is uncertain as they could consist of a mixture of ammonia and [NH4]SH. Ammonium sulfide solutions are used occasionally in photographic developing, to apply patina to bronze, and in textile manufacturing. It can be used as a selective reducing agent (cf. 2,4-dinitrochlorobenzene); where there are two nitro groups, only one of them is selectively reduced.

The 1990–91 CRC Handbook of Chemistry and Physics gives information for anhydrous ammonium monosulfide ([NH4]2S) and ammonium pentasulfide ([NH4]2S5) as separate from anhydrous ammonium hydrosulfide ([NH4]SH), describing the former two both as yellow crystalline substances that are soluble in cold water and alcohol, and which both decompose in hot water or at high temperature in general (115 °C for the pentasulfide), but the latter as a white crystalline solid (which also decomposes in hot water).[1] Thus, it seems that solid ammonium sulfide can be distinct from solid ammonium hydrosulfide, even if this is not true in aqueous solution.

References

edit
  1. ^ a b c Lide, David R., ed. (1990). "Physical Constants of Inorganic Compounds". CRC Handbook of Chemistry and Physics (71st ed.). CRC Press, inc. p. 4-45.
  2. ^ Pradyot Patnaik. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN 0-07-049439-8
  3. ^ Record of ammonium hydrosulfide in the GESTIS Substance Database of the Institute for Occupational Safety and Health, accessed on October 22, 2010.
  4. ^ Goodman, J. T.; Rauchfuss, T. B. (2002). "Useful Reagents and Ligands". Inorganic Syntheses. Inorganic Syntheses. Vol. 33. pp. 107–110. doi:10.1002/0471224502.ch2. ISBN 978-0-471-20825-9.
  5. ^ W. P. Bloxam (1895). "The Sulphides and Polysulphides of Ammonium". J. Chem. Soc., Trans. 67: 283. doi:10.1039/CT8956700277.
  6. ^ C. D. West (1934). "The Crystal Structures of Some Alkali Hydrosulfides and Monosulfides". Zeitschrift für Kristallographie - Crystalline Materials. 88 (1–6): 97–115. doi:10.1524/zkri.1934.88.1.97. S2CID 100849097.