Wikipedia

Zero point (photometry)

For other uses, see Zero point (disambiguation).

In astronomy, the zero point in a photometric system is defined as the magnitude of an object that produces 1 count per second on the detector.[1] The zero point is used to calibrate a system to the standard magnitude system, as the flux detected from stars will vary from detector to detector.[2] Traditionally, Vega is used as the calibration star for the zero point magnitude in specific pass bands (U, B, and V), although often, an average of multiple stars is used for higher accuracy.[3] It is not often practical to find Vega in the sky to calibrate the detector, so for general purposes, any star may be used in the sky that has a known apparent magnitude.[4]

General formula edit

 
Vega, the star typically used as the zero point in photometric systems

The equation for the magnitude of an object in a given band is

 
where M is the magnitude of an object, F is the flux at a specific wavelength, and S is the sensitivity function of a given instrument. Under ideal conditions, the sensitivity is 1 inside a pass band and 0 outside a pass band.[3] The constant C is determined from the zero point magnitude using the above equation, by setting the magnitude equal to 0.[4]

Vega as calibration edit

Under most circumstances, Vega is used as the zero point, but in reality, an elaborate "bootstrap" system is used to calibrate a detector.[3][5] The calibration typically takes place through extensive observational photometry as well as the use of theoretical atmospheric models.[5]

Bolometric magnitude zero point edit

While the zero point is defined to be that of Vega for passband filters, there is no defined zero point for bolometric magnitude, and traditionally, the calibrating star has been the sun.[6] However, the IAU has recently defined the absolute bolometric magnitude and apparent bolometric magnitude zero points to be 3.0128×1028 W and 2.51802×10−8 W/m2, respectively.[7]

See also edit

References edit

  1. ^ "HST Data Handbook, Chapter 28.1". Space Telescope Science Institute. Retrieved 2019-09-04.
  2. ^ "Zeropoints". European Southern Observatory.
  3. ^ a b c Carroll, Bradley W.; Ostlie, Dale A. (2017). Introduction to Modern Astrophysics. Cambridge University Press. p. 77.
  4. ^ a b "Calibrating Photometric Data". Sheffield University.
  5. ^ a b O'Connell. "Magnitude and Color Systems" (PDF). Caltech. Retrieved 17 March 2019.
  6. ^ Casagrande, Luca (2018-10-23), compute bolometric corrections and synthetic colours for input values of stellar parameters: casaluca/bolometric-corrections, retrieved 2018-12-27
  7. ^ Mamajek, E. E.; Torres, G.; Prsa, A.; Harmanec, P.; Asplund, M.; Bennett, P. D.; Capitaine, N.; Christensen-Dalsgaard, J.; Depagne, E. (2015-10-21). "IAU 2015 Resolution B2 on Recommended Zero Points for the Absolute and Apparent Bolometric Magnitude Scales". arXiv:1510.06262 [astro-ph.SR].
Retrieved from "https://en.wikipedia.org/w/index.php?title=Zero_point_(photometry)&oldid=1073422661"