The transverse/Y axis, lateral axis, or pitch axis is an imaginary line running horizontally across the ship and through the centre of mass. A pitch motion is an up-or-down movement of the bow and stern of the ship.
The longitudinal/X axis, or roll axis, is an imaginary line running horizontally through the length of the ship, through its centre of mass, and parallel to the waterline. A roll motion is a side-to-side or port-starboard tilting motion of the superstructure around this axis.
There are three special axes in any ship, called longitudinal, transverse and vertical axes. The movements around them are known as roll, pitch, and yaw respectively.
- The up/down rotation of a vessel about its transverse/Y (side-to-side or port-starboard) axis. An offset or deviation from normal on this axis is referred to as trim or out of trim.
- The tilting rotation of a vessel about its longitudinal/X (front-back or bow-stern) axis. An offset or deviation from normal on this axis is referred to as list or heel. Heel refers to an offset that is intentional or expected, as caused by wind pressure on sails, turning, or other crew actions. The rolling motion towards a steady state (or list) angle due to the ship's own weight distribution is referred in marine engineering as heel. List normally refers to an unintentional or unexpected offset, as caused by flooding, battle damage, shifting cargo, etc.
- The turning rotation of a vessel about its vertical/Z axis. An offset or deviation from normal on this axis is referred to as deviation or set. This is referred to as the heading of the boat relative to a magnetic compass (or true heading if referenced to the true north pole); it also affects the bearing.
- The linear vertical (up/down) motion; excessive downward heave can swamp a ship.
- The linear transverse (side-to-side or port-starboard) motion. This motion is generated directly either by the water and wind currents exerting forces against the hull or by the ship's own propulsion; or indirectly by the inertia of the ship while turning. This movement can be compared to the vessel's drift from its course.
- The linear longitudinal (front/back or bow/stern) motion imparted by maritime conditions.
There are methods for both passive and active motion stabilization used in some designs. They include static hull features such as skegs and bilge keels, or active mechanical devices like counterweights, antiroll tanks and stabilizers.
- Jibe – Basic sailing maneuver, where ship turns its stern through the wind
- Tacking (sailing) – Basic sailing maneuver, where ship turns its bow through the wind
- Translation (physics)
- Rotation – Movement of an object around an axis
- Naval architecture – Engineering discipline dealing with the design and construction of marine vessels
- Seakeeping – Response of a vessel to sea conditions
- Stern suction
- Ship stability – Ship response to disturbance from an upright condition
- Ship motion test – Scale model hydrodynamic test to predict full size behaviour
- Six degrees of freedom – Types of movement possible for a rigid body in three-dimensional space
- Flight dynamics – Study of the performance, stability, and control of flying vehicles
- Society of Naval Architects and Marine Engineers (SNAME), "Principles of Naval Architecture", 1989, Vol. III, Pg.41, Section 3 - Ship Responses to Regular Waves
- Sukas, Omer Faruk; Kinaci, Omer Kemal; Bal, Sakir (2019). "Theoretical background and application of MANSIM for ship maneuvering simulations". Ocean Engineering, 192, 106239. https://doi.org/10.1016/j.oceaneng.2019.106239 https://www.mansim.org