This article relies largely or entirely on a single source. (February 2012)
In computer programming, a semipredicate problem occurs when a subroutine intended to return a useful value can fail, but the signalling of failure uses an otherwise valid return value. The problem is that the caller of the subroutine cannot tell what the result means in this case.
The division operation yields a real number, but fails when the divisor is zero. If we were to write a function that performs division, we might choose to return 0 on this invalid input. However, if the dividend is 0, the result is 0 too. This means there is no number we can return to uniquely signal attempted division by zero, since all real numbers are in the range of division.
Early programmers dealt with potentially exceptional cases, as in the case of division, using a convention that required the calling routine to check the validity of the inputs before calling the division function. This had two problems. First, it greatly encumbers all code that performs division (a very common operation). Second, it violates the Don't repeat yourself and encapsulation principles, where the former is about eliminating duplicated code, and the latter suggests that data associated code should be contained in one place (in this case the verification of input was done separately). If we imagine a more complicated computation than division, it could be hard for the caller to know what is considered invalid input; in some cases figuring out whether the input is valid may be as costly as performing the entire computation. There's also the possibility of the target function being modified and then expecting different preconditions than the ones the caller has checked for; such a change would require changes in all the places where the function was called from.
The semipredicate problem is not universal among functions that can fail.
Using a custom convention to interpret return valuesEdit
If the function's range does not cover the entire space corresponding to the data type of the function's return value, a value known to be impossible under normal computation can be used. For example, consider the function
index, which takes a string and a substring, and returns the integer index of the substring in the main string. If the search fails, the function may be programmed to return -32,768 (or any other negative value), since this can never signify a successful result.
This solution has its problems, though, as it overloads the natural meaning of a function with an arbitrary convention.
- The programmer must remember specific failure values for many functions, which of course cannot be identical if the functions have different domains.
- A different implementation of the same function may choose to use a different failure value, resulting in possible bugs when programmers move from environment to environment.
- If the failing function wishes to communicate useful information about why it had failed, one failure value is insufficient.
- A signed integer halves the possible index range to be able to store the sign bit.
- While the chosen value is an invalid result for this operation, it might be a valid input to followup operations. For example in Python
str.findreturns -1 if the substring is not found, but -1 is a valid index (negative indices generally start from the end).
Many languages allow, through one mechanism or another, a function to return multiple values. If this is available, the function can be redesigned to return a boolean value signalling success or failure, in addition to its primary return value. If multiple error modes are possible, the function may instead return an enumerated return code (error code) in addition to its primary return value.
Various techniques for returning multiple values include:
- Returning a tuple of values. This is conventional in languages such as Python, that have a built-in tuple data type, and special syntax for handling these: in Python, x, y = f() calls the function f which returns a pair of values, and assigns the elements of the pair to two variables.
- Secondary return values as in Common Lisp. All expressions have a primary value, but secondary values might be returned to interested callers. For example, the
GETHASHfunction returns the value of the given key in an associative map, or a default value otherwise. However, it also returns a secondary boolean indicating whether the value was found, making it possible to distinguish between the "no value was found" and "the value found was equal to default value" cases. This is different from returning a tuple, in that secondary return values are optional – if a caller does not care about them, it may ignore them completely, whereas tuple-valued returns are merely syntactic sugar for returning and unpacking a list, and every caller must always know about and consume all items returned.
- Languages with call by reference – or equivalents, such as call by address using pointers – can allow for multivalued return by designating some parameters as output parameters. In this case, the function could just return the error value, with a variable intended to store the actual result being passed to the function. This is analogous to the use of an exit status to store an error code, and streams for returning content.
- A variant of output parameters is used in object-oriented languages that use call by sharing, where a mutable object is passed to a function, and the object is mutated to return values.
- Logic programming languages such as Prolog have no return values. Instead, unbound logical variables are used as output parameters, to be unified with values constructed in a predicate call.
Global variable for return statusEdit
Similar to an "out" argument, a global variable can store what error occurred (or simply whether an error occurred).
For instance, if an error occurs, and is signalled (generally as above, by an illegal value like −1) the Unix
errno variable is set to indicate which value occurred. Using a global has its usual drawbacks: thread safety becomes a concern (modern operating systems use a thread-safe version of errno), and if only one error global is used, its type must be wide enough to contain all interesting information about all possible errors in the system.
Exceptions are one widely used scheme for solving this problem. An error condition is not considered a return value of the function at all; normal control flow is disrupted and explicit handling of the error takes place automatically. They are an example of out-of-band signalling.
Expanding the return value typeEdit
Manually created hybrid typesEdit
In C, a common approach, when possible, is to use a data type deliberately wider than strictly needed by the function. For example, the standard function
getchar() is defined with return type
int and returns a value in the range [0,255] (the range of
unsigned char) on success or the value
EOF (implementation-defined, but outside the range of
unsigned char) on the end of the input or a read error.
Nullable reference typesEdit
In languages with pointers or references, one solution is to return a pointer to a value, rather than the value itself. This return pointer can then be set to null to indicate an error. It is typically suited to functions that return a pointer anyway. This has a performance advantage over the OOP style of exception handling, with the drawback that negligent programmers may not check the return value, resulting in a crash when the invalid pointer is used. Whether a pointer is null or not is another example of the predicate problem; null may be a flag indicating failure or the value of a pointer returned successfully. A common pattern in the UNIX environment is setting a separate variable to indicate the cause of an error. An example of this is the C standard library
Implicitly hybrid typesEdit
In dynamically-typed languages, such as PHP and Lisp, the usual approach is to return "false", "none" or "null" when the function call fails. This works by returning a different type to the normal return type (thus expanding the type). It is a dynamically-typed equivalent to returning a null pointer.
For example, a numeric function normally returns a number (int or float), and while zero might be a valid response; false is not. Similarly, a function that normally returns a string might sometimes return the empty string as a valid response, but return false on failure. This process of type-juggling necessitates care in testing the return value: e.g. in PHP, use
=== (i.e. equal and of same type) rather than just
== (i.e. equal, after automatic type-conversion). It works only when the original function is not meant to return a boolean value, and still requires that information about the error be conveyed via other means.
Explicitly hybrid typesEdit
In Haskell and other functional programming languages, it is common to use a data type that is just as big as it needs to be to express any possible result. For example, we could write a division function that returned the type
Maybe Real, and a
getchar function returning
Either String Char. The first is an option type, which has only one failure value,
Nothing. The second case is a tagged union: a result is either some string with a descriptive error message, or a successfully read character. Haskell's type inference system helps ensure that callers deal with possible errors. Since the error conditions become explicit in the function type, looking at its signature immediately tells the programmer how to treat errors. In addition, tagged unions and option types form monads when endowed with appropriate functions: this may be used to keep the code tidy by automatically propagating unhandled error conditions.
- Norvig, Peter (1992). "The General Problem Solver". Paradigms of artificial intelligence programming: case studies in common LISP. Morgan Kaufmann. p. 127. ISBN 1-55860-191-0.
- "Built-in Types — Python 3.10.4 documentation".
- "If i or j is negative, the index is relative to the end of sequence s:
len(s) + ior
len(s) + jis substituted."common sequence operations note (3)
- Why Exceptions should be Exceptional - an example of performance comparison