This article needs additional citations for verification. (January 2008) (Learn how and when to remove this template message)
1971 Reliant Regal
|Fate||Finishing of production|
|T L Williams, co-founder|
E S Thompson, co-founder
Reliant Motor Company was a large manufacturing company which mainly produced vehicles for niche markets such as small three-wheeled vehicles and sports cars, Reliant was best known for the three-wheeled Reliant Robin, but produced a variety of vehicles over 60 years, including popular sports cars, convertibles and commercial vehicles. Around half a million Reliant vehicles were produced, and were sold in at least nine countries. For a period from the 1970s to the 1990s, Reliant was the UK's 2nd biggest British-owned car manufacturer behind British Leyland.
To make their low weight vehicles the company decided to produce bodyshells from fibreglass in the mid 1950s, from this Reliant became a pioneer in fibreglass design, technique and developments. Reliant would produce much more than vehicle related fibreglass though such as kitchen tops, train bodies and jet ski shells. In the 1970s Reliant were the largest producer of glass fibre in Europe.
The only part of Reliant Motor Company LTD that still operates is Reliant Partsworld, which produces spares for Reliant vehicles.
Company history and car productionEdit
This section needs additional citations for verification. (January 2019) (Learn how and when to remove this template message)
When the Raleigh Bicycle Company decided to discontinue the manufacture of their three-wheeled vehicles in 1934, their Works Manager T. L. Williams and a colleague, E. S. Thompson, felt that the days of lightweight three-wheelers were not over. They decided to build their own vehicle in Williams's back garden at Kettlebrook Road, Tamworth. The homebuilt design closely resembled the Karryall van previously built by Raleigh, and the prototype was licensed in January 1935. It was a 7 cwt (356 kg) van with a steel chassis, powered by a 600 cc single-cylinder engine driving the rear wheels through a 3-speed gearbox and chain drive. The body was a hardwood frame with aluminium panels attached to it, in the manner of the time. With the motorcycle front end, mounted in the open, in front of the bulkhead, it was essentially a motorcycle fitted with a box body. The initial prototype had handlebars for steering although after several trials with small local companies, this was changed for a steering wheel.
The work moved to a disused bus depot on Watling Street in Fazeley. On 3 June 1935, the first Reliant was delivered. Powered by a single-cylinder air-cooled 600cc J.A.P. engine, the driver sat centrally on the vehicle astride the engine, much like a motorcyclist. The single-cylinder engine left the Reliant underpowered. In March 1936 a two-cylinder, water-cooled J.A.P. engine and an increase to 8 cwt (407 kg) gross vehicle weight (gvw) was released. The driver no longer sat astride the engine and the vehicle gained more conventional forward-facing seats in the front. The first improved 8cwt twin cylinder model was delivered on 16 March 1936.
In 1938 the Reliant Motor Company started to use the 747cc four-cylinder 7 hp Austin side-valve engine as found in the popular Austin Seven. The first four-cylinder Reliant was delivered on 12 March 1938. The Austin Car Company then announced their intention to cease production of the 747cc Austin Seven engine. Williams was always enthusiastic about making Reliant as self-reliant as possible. He was keen that the company did not buy parts that it could make 'in-house'. Austin sold all the 747cc engine tooling and manufacture rights to Reliant. Reliant therefore commenced to manufacture this engine. Although appearing very similar to the Austin engine, the level of commonality between Reliant and Austin remains unclear; the Reliant side-valve engine was a 747cc four-cylinder unit built using smaller-scale manufacturing techniques than Austin. The Reliant crankcase was sand-cast rather than die-cast.
During the Second World War Reliant machined parts for the war effort. In the post-war years, three-wheeler development continued. Reliant introduced a slightly modified van called the Regent. Visually similar to an oversized motorcycle, the first Regent was completed on 13 March 1946, ten years after the first twin-cylinder van.
The Regent grew to a GVW of 10 cwt and was better equipped with sliding windows in the doors, rather than canvas side screens. Two larger models were produced, a 12 cwt Regent and a Prince Regent. In 1953, the Regent continued to be built alongside the Reliant Regal. The Regent was eventually replaced by the Regal Mk II 5cwt van in 1956.
In 1952 a four-seat car version was launched, initially with an aluminium body, but panel by panel the company substituted glass fibre, as the company's understanding of the material improved and the price of aluminium increased. By 1956 the bodywork of the (by now) Mark 3 version of the Reliant Regal had changed completely to glass fibre, the first generation of vehicles were Mk1 to Mk6 with each one getting improvements and slightly different styling, the car was originally powered by the Austin Seven engine but when production ended on that design by Austin Motor Company, Reliant bought the design and redesigned it with improvements giving the 750cc engine 17.5 hp which was a big improvement over the 7hp of the original Austin design. Reliant were one of the last companies to produce a sidevalve engine design with production of the Reliant 750cc engine ending in 1962.
By 1963 the all new Regal 3/25 had its body completely made of fibreglass. On previous generations of the Regal the body was fibreglass, but the floor was made of hardwood that was bolted together. The engine was Europe's first mass-produced lightweight overhead valve aluminium alloy engine and the UK's first British overhead valve all-alloy engine, initially 598cc on the Regal 3/25 but later upgraded to 700cc on the later Regal 3/30.
At the same time Reliant were working for other countries to design vehicles for home-grown production. Vehicles would be sent over in kit form for the countries' own workforce to assemble. Reliant would first design the vehicle to the countries' or companies' requirements. The first was the Anadol in Turkey, which was based on a mix of Ford parts and a custom chassis. The Anadol began as a 2-door saloon, then a 4-door saloon, followed by commercial pickup and van versions. The pickup carried on production until the early 1990s.
Another vehicle of this sort of start was the Sabra also based on Ford running gear and engine. A 2-door coupe or convertible for Autocars Co. was designed for Israel. Reliant was so impressed with the design they sold it in the UK under the name Sabre, also to help Reliant's company image expand beyond a 3-wheeled micro-car maker. The car sold poorly against competitors such as Triumph and MG.
Later Reliant bought a prototype design for the replacement Daimler Dart which would later become the Scimitar Coupe and later would become the best-selling sporting estate – the Scimitar GTE.
To power the Scimitar GT Coupe and Sabre, Reliant turned towards Ford of Britain and were supplied with the Zephyr 6 and Consul 4 engines. The Coupe GT could be purchased with either the 2.5 litre or the 3.0 litre Essex V6 engines. Later, 3.0 GTE's were fitted with the "Essex" V6 engine and gearbox. On the 3.0 V6 GTE the back axle ratio changed depending on the use of either a straight 4-speed gearbox or one with an overdrive unit.
Reliant bought out Bond Cars in 1969 after Bond had gone into liquidation. Reliant purchased Bond after wanting to enter Triumph dealerships. Bond's equipe sports car already had this agreement, but sadly Triumph entered British Leyland and this deal ended. It is said that Bond was Reliant's main competitor in 3-wheeled vehicles with the Bond Minicar and the Bond 875, but Reliant vehicles outsold Bond in huge numbers with a much larger production and dealer network. Reliant did use the Bond name for the 1970s Bond Bug, which was a Reliant prototype originally named the Reliant Rogue, a sporty 3-wheeler designed by the Ogle designer Tom Karen. The Bug used a shortened Reliant Regal chassis and other mechanical parts, but many of the new parts such as the front swing arm were a brand new design that would also be used on the new Reliant Robin of 1973. The Bond Bug came in 700, 700E and 700ES models until replaced by the 750 model and production ended.
Reliant built 4-wheeled versions of their 3-wheeled stablemates – the original was called the Reliant Rebel, which had three-quarters of the rear chassis design of the Regal, but Triumph Herald front suspension and standard Austin Seven steering. The engines were the same 600cc and 700cc as the Regal but with higher compression and more torque because of the extra weight the Rebel carried over the Regal. The last model came with the 750cc version when the Mk1 Reliant Robin was introduced. The styling of the Rebel was intended to make the car look unique so it did not seem like a 4-wheeled version of the Regal; the Rebel came in saloon, estate and van models.
The Reliant Kitten was the 4-wheeled version of the 1970s Reliant Robin, designed to replace the Rebel and featuring the 850cc version of Reliant's own engine, which was introduced in 1975 (with the Reliant Robin gaining the engine shortly afterwards). The design this time featured very heavily on the Reliant Robin with only the nose of the design being different, having square headlights and a black panel around them – this was done mainly for cost-saving reasons so the parts from both vehicles could be shared for production.
After Reliant Kitten production stopped in 1982, the rights were sold to Sipani Automobiles in India who made the vehicle near-exactly the same, but with the name Sipani Dolphin. Later the vehicle became a 4-door hatchback called the Sipani Montana. The car was built well into the 1990s with exactly the same Kitten mechanicals. Reliant exported engines they had built for their own vehicles in the UK.
Between 1983 and 1990 a utility/pickup vehicle called the Reliant Fox was produced in the UK. This was based on an original development by Reliant to design a vehicle for the Greek company MEBEA. It was based on Reliant Kitten mechanicals with its own pick-up body and canvas top design. It had originally been built in Greece by MEBEA between 1979 and 1983. After production finished in Greece, Reliant decided to build it in the UK, but gave the Fox many design changes, including 12-inch wheels, altered suspension and the high compression 850cc engine. They designed a rear hardtop to make the vehicle into a van or estate. Tandy Industries used Foxes as a basis for a compact, two-berth campervan.
Reliant also made a small 3-wheeled commercial vehicle called the Reliant TW9, later sold by other companies as the Ant (and, like the Robin, licence-built in Greece by MEBEA), which was a chassis and cab, onto which a custom rear body was fitted: a road sweeper, a flat back, a van, a milk float and hydraulic lifting rear bed version were common fitments. Also as a fifth wheel (actually fourth wheel) articulated tractor unit was created to pull large trailers. It was often used by public utility companies or more commonly sold to councils, where its ability to negotiate narrow alleyways was a big advantage.
Reliant's expertise in the area of composite car body production also saw the company produce lightweight bodyshells for Ford RS200 rally cars and a glass fibre-bodied taxi, the MetroCab – the first to have full wheelchair provision, manufactured by a division of Kamkorp, they also made Ford fibreglass truck cabs and Ford Transit hightops.
With Reliant's expertise in glass fibre the company created bodies for trains, kitchen worktops and boat/jetski hulls.
Reliant's main business was selling 3-wheeled vehicles, the main market these would sell to would be a motorcyclist who didn't wish to pass their full car licence test, this was a sizeable niche market due to the large number of motorcyclists, this niche lasted until 2001 when the EU eliminated the B1 class from been issued with a full motorcycle licence (the B1 allowing the holder to drive a 3 or 4-wheeled vehicle up to the weight of 550 kg), this killed the market from having any new motorcyclists from driving a 3-wheeled vehicle, this would stop Reliant's market from growing.
The final years of car production up to 2001Edit
Reliant Motor Company produced 50 vehicles a week until 2001, when it finished production of its own models to focus on importing French microcars and motorcycles, as well as the Piaggio Ape range of commercial vehicles. A final version of the Reliant Robin was produced, with leather seats, metallic gold paint, alloy wheels, walnut dashboard, and some other luxurious features, which retailed for £10,000. The car was made in the company's 65th year of production, and so was named the Reliant Robin 65.
Reliant Cars Ltd. was renamed Reliant Partsworld, and operates from the factory where the Robin was built.
The old site of Reliant Motors, in Tamworth, was turned into a housing estate named Scimitar Park, after the Reliant Scimitar that the company produced. A number of streets in the estate were named after Reliant models as well, such as 'Robin Close'. The company produced up to two million vehicles over a 65-year history starting in 1935, and sold its cars in nine countries, including the Netherlands, India and the Middle East.
End of car productionEdit
The Hodge Group bought the majority of Reliant in 1962, selling it 15 years later to the Nash family. During the early 1990s the owner of Reliant was a major housing developer and when the 1992 recession hit, the company folded and Reliant was sold to Beans Engineering. By 1996 Jonathan Heynes took the lead and his main backer took control – Heynes created a new range of Robin and Rialto specifications to appeal to more customers including more luxury models such as the SLX, after this sales doubled as previously most Reliant vehicles were basic with not even the option of metallic paint. In 1997 production was relocated to Plant Lane, Burntwood, following a major redesign of the Robin model in 1998, the new model featured all new panels and was essentially a 'heavy facelift' designed by Andy Plumb. Research continued into 4-wheeled Reliant models such as a Kitten for the modern age. Prototypes for this featured in many newspapers and magazines at the time. Production continued of the Robin model until 2001 when shareholders decided to import French Ligier micro-cars and Piaggio Ape 3-wheeler instead. Jonathon Heynes sold his shares and left the company before production ended because he wished to create an all new 4-wheeled Reliant model instead.
The last Reliant made was the Robin 65 a Reliant Robin in metallic Gold to celebrate 65 years of car production, the vehicles had every optional extra and sold for £10,000, 65 of these vehicles were built up to Valentine's Day 2001.
Other forms of manufacturingEdit
Since Reliant would be known for building robust fibreglass vehicles it would diversify into producing fibreglass items other than their own vehicles.
Many of this was shown in the "World of Reliant" documentary, which was written and filmed by Reliant in the early 1980s to show how diverse the company had become from a small car company producing 3 wheeled vehicles.
Other fibreglass products produced were items such as GRP sinks and kitchen work tops, GRP replacement car wings for metal vehicles, GRP guttering and tubes, GRP train carriage bodies for British rail and GRP aircraft bodies.
Reliant also had many contracts with Ford to build fibreglass high roof rops for their Transit model, Vauxhall would also contract Reliant make their GRP bodykits for the Chevette.
Short lived revivalEdit
Shortly after Reliant announced that production of the Robin would cease, production rights for the Reliant Robin were sold to a Sudbury-based firm called B&N Plastics, which redesigned major parts of the car. A deal was done where Reliant Motor Company would supply the mechanical parts of the Reliant Robin to B&N plastics and then the fibreglass skills of B&N plastics would be used to build the vehicle and sell it under its own name.
Production of the new Robin would begin in late 2001, new car would be called the BN-1 Robin with no Reliant motor company branding, the later a BN-2 model would be made with extras such as electric windows. The cost of the base model, the BN-1 Robin, was £10,000, but had all the features of the Robin 65, such as a leather interior. The BN-2 model which was produced had all these extras plus more, even having the optional of a carbon fibre effect dashboard.
Sadly after 30 to 40 cars produced Reliant Motor company couldn't supply the mechanical parts of the Reliant Robin as they had decided to end production of the Reliant 850cc engine, this would mean the BN-1 Robin would need a redesign to use a different engine if production should continue.
B&N plastics had already spent £100,000 on type approving the Robin design so production could start, this is the company sought to find more investors to help fund further redesigns to keep the Robin alive but by early 2002 no investors were found and B&N plastics ended its car production with over 200 orders unfilled, B&N Plastics ceased production in late 2002.
In later years it was revealed that B&N plastics were planning to fit a Japanese K-car 660cc 3 cylinder engine and 5 speed gearbox to make the reliant Robin more modern.
Reliant in the early 1950s would strike a deal in Israel to produce Regent vans in SKD form, not long after this Israel would ask reliant for a 4 wheeled vehicle design which could be built in Israel that was strong for their rough roads and could be used with a choice of van, pick up and estate body styles. The car used a lot of Reliant's existing parts basically converting a Regent into a 4 wheeled vehicle, this vehicle would never be sold in the UK and called the Reliant Regent four 10 cwt van, this would be sold in Israel by Autocars limited but the vehicle renamed Sussita to make it seem a more home grown car. In 1958 Reliant showed this vehicle excessively in the UK to show they could design more than just 3 wheeled vehicles but also only showed in LHD form as it was only a overseas model. Later the pick up and estate models would be designed with much praise from Israel buyers.
Building on this relationship Autocars would then set Reliant the challenge to design a peoples car for their country, this car would later be named the Carmel. The Carmel was designed around the same time Reliant were designing its Regal 3/25 and somehow some of its design features rubbed off, the square styling with a reverse slant Ford Anglia rear window for one, the engine was also the 1100cc Ford Anglia unit, apart from the body many of the chassis and running gear was used from the Sussita. Reliant would later design the Sabra Sport using Ashley Laminates existing kit car designs which reliant would redesign again to sell it in the UK market as the Reliant Sabre.
Reliant would continue designing vehicles for Autocars into the early 1970s when Autocars started to source parts from Standard-Triumph severing ties with reliant in the process, Autocars would end in the late 1970s and would plan to start a new company selling Reliant Kittens in Israel but this would not happen.
From this export started another as in 1962 a Turkish delegation visited Autocars in Israel and was impressed with its car production, Turkey would later instruct Reliant to design its own Peoples car. Through this deal Reliant designed the Anadol, a saloon vehicle using a GRP body, separate chassis and ford running gear, this deal though would not just be for a vehicle design but to help turkey create its whole car production from its factory, paint and production. The company would be named Otosan.
The Anadol would be designed into 2 door saloon, 4 door saloon, van, pick up and estate, several redesigns would keep the Anadol looking modern into the 1970s, later Otosan became more distant from Reliant as local content rose. Reliant offered in the 1980s again to redesign the Anadol even presenting a prototype but by this time Otosan believed it could go it alone and redesigned the vehicle itself, this wouldn't end well for Otosan with declining sales and eventually Otosan became a Ford assembly plant for Turkey producing the Ford Escort.
On 8 July 2017, a blue plaque was unveiled to honour both of Reliant's founders, T. L. Williams and E. S. Thompson, and marked the birthplace of Reliant. The first Reliant prototype was built by Williams and Thompson in 1934, in the rear garden of Williams' residence named Bro-Dawel on the Kettlebrook Road in Tamworth.
The most widespread myth is that Reliants cannot go around corners. This was supposedly demonstrated on the BBC's Top Gear programme, but Jeremy Clarkson himself admitted in The Sunday Times in 2016 that the Robin only rolled over frequently because the production team messed with the differential. If it hadn't, the car would have been much more stable.
Another myth is that a Reliant – or any three-wheeled vehicle – isn't allowed on British motorways. This is not the case. Any two-, three- or four-wheeled vehicle is allowed on the motorway as long as its engine size is over 50 cc (0.05 l).
It is a common misconception that the main character (Derek "Delboy" Trotter) in the British television comedy series Only Fools and Horses owned a Reliant Robin. Many people painted their Reliant Robins and Rialtos yellow with the famous "Trotters’ Independent Trading Co" lettering, but the Trotters' van was actually a Reliant Regal Supervan III.
Many people are under the impression Reliant 3 wheelers can be driven on a CBT licence, reliant 3 wheelers have engines larger than the CBT licence allows. Such license holders cannot drive Reliants. To drive a Reliant, a full motorcycle or full car driving licence is required and the driver must be over 21.
One widely held myth was that all Reliant 3-wheelers have no reverse gear; before 1964 the reverse gear would be disabled, but all Reliants had reverse gear.
Driving a Reliant on a motorcycle licenceEdit
This section does not cite any sources. (November 2018) (Learn how and when to remove this template message)
Originally, to drive a three-wheeled vehicle on a motorcycle licence required passing a full motorcycle test and completing a restriction period. When the licence was issued it included a B1 class. This conferred the right to drive a vehicle with three or four wheels up to 550 kg, but the final B1 licences were issued in 2001.
More interest came to Reliants from January 2013, as the licensing changed again. Now drivers with a full A-category motorcycle licence who are over 21 may drive a three-wheeled vehicle of any weight, the age restriction of 21 applies to full car licence holders also in the UK.
Driving any Reliant three-wheeled vehicle is not legal on a CBT or any lower type of licence.
- 7cwt, 10cwt 1935–1939
- 8cwt, 10cwt, 12cwt 1946-1950
- Regent 1950–1956
- Regal 1953–1973 and Supervan III
- Sabre 1961–1964
- Scimitar GT 1964–1970
- Rebel 1964–1974
- FW5 1966–1975
- TW9 1967–1987
- Scimitar GTE/GTC 1968–1986
- Robin 1973–1982, 1989–2002
- Kitten 1975–1982
- FW11 1977
- Rialto 1982–1997
- Fox 1982–1990
- Scimitar SS1/SST 1984–1992
- Scimitar Sabre 1992–1995
|Wikimedia Commons has media related to Reliant vehicles.|
- "Robin's rest". CAR: 106–108. December 2000.
- Payne, Elvis (2016). The Reliant Motor Company. Crecy Publishing.
- Skartsis, L., "Greek Vehicle & Machine Manufacturers 1800 to present: A Pictorial History", Marathon (2012) ISBN 978-960-93-4452-4 (eBook)
- "The Clarkson review: Reliant Robin". 11 January 2016. Retrieved 30 August 2017.
- "Jeremy Clarkson Admits Top Gear's Reliant Robin Rollovers Were Completely Rigged". 13 January 2016. Retrieved 30 August 2017.
- Pither, D (2001). Reliant Regal and Robin. Thrupp.
- Wotherspoon, N (1993). Lawrie Bond; the man and the marque. Minster Lovell.
- Armstrong, Aldridge, Boyes, Mustoe & Storey. Companion to British Road Haulage History. NMSI Trading Science Museum. ISBN 1-900747-46-4.CS1 maint: Multiple names: authors list (link)
- Payne, Elvis (2016). The Reliant Motor Company. Crecy Publishing.