In polymer chemistry, polymerization (American English), or polymerisation (British English), is a process of reacting monomer molecules together in a chemical reaction to form polymer chains or three-dimensional networks. There are many forms of polymerization and different systems exist to categorize them.
In chemical compounds, polymerization can occur via a variety of reaction mechanisms that vary in complexity due to the functional groups present in the reactants and their inherent steric effects. In more straightforward polymerizations, alkenes form polymers through relatively simple radical reactions; in contrast, reactions involving substitution at a carbonyl group require more complex synthesis due to the way in which reactants polymerize. Alkanes can also be polymerized, but only with the help of strong acids.
As alkenes can polymerize in somewhat straightforward radical reactions, they form useful compounds such as polyethylene and polyvinyl chloride (PVC), which are produced in high tonnages each year due to their usefulness in manufacturing processes of commercial products, such as piping, insulation and packaging. In general, polymers such as PVC are referred to as "homopolymers," as they consist of repeated long chains or structures of the same monomer unit, whereas polymers that consist of more than one monomer unit are referred to as copolymers (or co-polymers).
Other monomer units, such as formaldehyde hydrates or simple aldehydes, are able to polymerize themselves at quite low temperatures (ca. −80 °C) to form trimers; molecules consisting of 3 monomer units, which can cyclize to form ring cyclic structures, or undergo further reactions to form tetramers, or 4 monomer-unit compounds. Such small polymers are referred to as oligomers. Generally, because formaldehyde is an exceptionally reactive electrophile it allows nucleophilic addition of hemiacetal intermediates, which are in general short-lived and relatively unstable "mid-stage" compounds that react with other molecules present to form more stable polymeric compounds.
Polymerization that is not sufficiently moderated and proceeds at a fast rate can be very hazardous. This phenomenon is known as hazardous polymerization and can cause fires and explosions.
Step-growth v chain growth polymerizationEdit
Step-growth and chain-growth are the main classes of polymerization reaction mechanisms. The former is often easier to implement but requires precise control of stoichiometry. The latter more reliably affords high molecular-weight polymers, but only applies to certain monomers.
In step-growth (or step) polymerization, pairs of reactants, of any lengths, combine at each step to form a longer polymer molecule. The average molar mass increases slowly. Long chains form only late in the reaction.
Step-growth polymers are formed by independent reaction steps between functional groups of monomer units, usually containing heteroatoms such as nitrogen or oxygen. Most step-growth polymers are also classified as condensation polymers, since a small molecule such as water is lost when the polymer chain is lengthened. For example, polyester chains grow by reaction of alcohol and carboxylic acid groups to form ester links with loss of water. However, there are exceptions; for example polyurethanes are step-growth polymers formed from isocyanate and alcohol bifunctional monomers) without loss of water or other volatile molecules, and are classified as addition polymers rather than condensation polymers.
Step-growth polymers increase in molecular weight at a very slow rate at lower conversions and reach moderately high molecular weights only at very high conversion (i.e., >95%). Solid state polymerization to afford polyamides (e.g., nylons) is an example of step-growth polymerization.
In chain-growth (or chain) polymerization, the only chain-extension reaction step is the addition of a monomer to a growing chain with an active center such as a free radical, cation, or anion. Once the growth of a chain is initiated by formation of an active center, chain propagation is usually rapid by addition of a sequence of monomers. Long chains are formed from the beginning of the reaction.
Chain-growth polymerization (or addition polymerization) involves the linking together of unsaturated monomers, especially containing carbon-carbon double bonds. The pi-bond is lost by formation of a new sigma bond. Chain-growth polymerization is involved in the manufacture of polymers such as polyethylene, polypropylene, polyvinyl chloride (PVC), acrylate. In these cases, the alkenes RCH=CH2 are converted to high molecular weight alkanes (-RCHCH2-)n (R = H, CH3, Cl, CO2CH3).
Other forms of chain growth polymerization include cationic addition polymerization and anionic addition polymerization. A special case of chain-growth polymerization leads to living polymerization. Ziegler–Natta polymerization allows considerable control of polymer branching.
Diverse methods are employed to manipulate the initiation, propagation, and termination rates during chain polymerization. A related issue is temperature control, also called heat management, during these reactions, which are often highly exothermic. For example, for the polymerization of ethylene, 93.6 kJ of energy are released per mole of monomer.
The manner in which polymerization is conducted is a highly evolved technology. Methods include emulsion polymerization, solution polymerization, suspension polymerization, and precipitation polymerization. Although the polymer dispersity and molecular weight may be improved, these methods may introduce additional processing requirements to isolate the product from a solvent.
Most photopolymerization reactions are chain-growth polymerizations which are initiated by the absorption of visible or ultraviolet light. The light may be absorbed either directly by the reactant monomer (direct photopolymerization), or else by a photosensitizer which absorbs the light and then transfers energy to the monomer. In general only the initiation step differs from that of the ordinary thermal polymerization of the same monomer; subsequent propagation, termination and chain transfer steps are unchanged. In step-growth photopolymerization, absorption of light triggers an addition (or condensation) reaction between two comonomers that do not react without light. A propagation cycle is not initiated because each growth step requires the assistance of light.
Photopolymerization can be used as a photographic or printing process, because polymerization only occurs in regions which have been exposed to light. Unreacted monomer can be removed from unexposed regions, leaving a relief polymeric image. Several forms of 3D printing—including layer-by-layer stereolithography and two-photon absorption 3D photopolymerization—use photopolymerization.
This section does not cite any sources. (August 2020) (Learn how and when to remove this template message)
In a given formulation or recipe of a polymer compound, the total amount/parts per hundred of polymer added to prepare certain compound is called polymer ratio. It basically refers to the aggregated amount of polymer content within the formulation that may undergo any physical or chemical change during the course of post polymerization or physical heat treatment.
- Jenkins, A. D.; Kratochvíl, P.; Stepto, R. F. T.; Suter, U. W. (1996). "Glossary of basic terms in polymer science (IUPAC Recommendations 1996)" (PDF). Pure and Applied Chemistry. 68 (12): 2287–2311. doi:10.1351/pac199668122287. S2CID 98774337. See definition 3.1, p. 2305.
- Young, R. J. (1987) Introduction to Polymers, Chapman & Hall ISBN 0-412-22170-5
- International Union of Pure and Applied Chemistry, et al. (2000) IUPAC Gold Book, Polymerization
- Clayden, J., Greeves, N. and Warren, S. (2000). Organic chemistry, Oxford University Press ISBN 0198503466 pp. 1450–1466
- Roberts, Durward T., JR. and Lawrence E. Calihan. "Polymerization (Polycondensation) of Alkanes over Fluosulfonic Acid and Antimony Pentafluoride". Journal of Macromolecular Science, Part A Vol. 7 , Iss. 8, 1973
- Cowie, J.M.G. (1991) Polymers: Chemistry and Physics of Modern Materials, Chapman and Hall, p. 4 ISBN 0849398134
- Allcock H.R., Lampe F.W. and Mark J.F. Contemporary Polymer Chemistry (3rd ed. Pearson Prentice-Hall 2003), p.29-30 ISBN 0-13-065056-0
- Fried, Joel R. (2003). Polymer Science and Technology (2nd ed.). Prentice-Hall. p. 23. ISBN 0-13-018168-4.
- Jeremic, Dusan (2014). "Polyethylene". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. pp. 1–42. doi:10.1002/14356007.a21_487.pub3.
- McKenzie, Thomas G.; Fu, Qiang; Wong, Edgar H. H.; Dunstan, Dave E.; Qiao, Greg G. (23 June 2015). "Visible Light Mediated Controlled Radical Polymerization in the Absence of Exogenous Radical Sources or Catalysts". Macromolecules. 48 (12): 3864–3872. Bibcode:2015MaMol..48.3864M. doi:10.1021/acs.macromol.5b00965. ISSN 0024-9297.
- Allcock H.R., Lampe F.W. and Mark J.F. Contemporary Polymer Chemistry (3rd ed. Pearson Prentice-Hall 2003), chap.5. ISBN 0-13-065056-0
- Soto, Marc; Sebastián, Rosa María; Marquet, Jordi (2014). "Photochemical Activation of Extremely Weak Nucleophiles: Highly Fluorinated Urethanes and Polyurethanes from Polyfluoro Alcohols". J. Org. Chem. 79 (11): 5019–5027. doi:10.1021/jo5005789. PMID 24820955.
- Wang, Xifan; Schmidt, Franziska; Hanaor, Dorian; Kamm, Paul H.; Li, Shuang; Gurlo, Aleksander (May 2019). "Additive manufacturing of ceramics from preceramic polymers". Additive Manufacturing. 27: 80–90. arXiv:1905.02060. doi:10.1016/j.addma.2019.02.012. S2CID 104470679.
- Mills, Benjamin; Grant-Jacob, James A; Feinaeugle, Matthias; Eason, Robert W (17 June 2013). "Single-pulse multiphoton polymerization of complex structures using a digital multimirror device" (PDF). Optics Express. 21 (12): 14853–8. Bibcode:2013OExpr..2114853M. doi:10.1364/oe.21.014853. ISSN 1094-4087. PMID 23787672.