This article needs additional citations for verification. (March 2008) (Learn how and when to remove this template message)
Panel beater or panelbeater is a term used in some Commonwealth countries to describe a person who repairs vehicle bodies back to their factory state after having been damaged (e.g., after being involved in a collision). In the United States and Canada, the same job is done by an auto body mechanic.
Panel beaters repair body work using skills such as planishing and metalworking techniques, welding, use of putty fillers, and other skills. Accident repair may require the panel beater to repair or replace parts of a vehicle. These parts may be made from various metals including steels and alloys, many different plastics, fibreglass and others.
The common panel beater will work on everyday vehicles, cars, vans, 4WDs for example. Specialised areas include repairs to motorcycles, trucks and even aircraft. Some panel beaters also work exclusively on vehicle restorations, and do not repair smash work at all. Others may specialise in body customisation such as is seen on hot rods etc.
Special equipment examples:
- Various hammers and dollies used for planishing.
- Body files and flippers.
- Assembly tools such as socket sets, screwdrivers and spanners.
- Other hand tools like pliers, tin snips, vise grips, punches, chisels, etc.
- Hydraulic pushing/pulling devices.
- Vehicle measuring and aligning devices, or jigs e.g.
- Vehicle lift hoists.
- Personal safety equipment such as boots, overalls, safety glasses, welding helmets, gloves, respirators and hearing protection.
- Welding equipment – MIG or TIG.
- Stud welder for pulling out dents.
Special equipment for restoration, advanced panel repair or panel fabrication from scratch include:
Training and certificationEdit
Training to become a panel beater is done by completing a trade apprenticeship. For the most part these apprenticeships are around three years long, but can be completed earlier. These usually consist of three years on the job training mixed with schooling at a trade school or TAFE. The fourth year is usually on the job training alone.
- "Panel Beater | Job Guide". Jobguide.thegoodguides.com.au. Archived from the original on 2009-04-09. Retrieved 2009-05-27.
- "Panel Beater | Panel Beating History". http://panelbeater.whangarei.biz. Archived from the original on 2012-08-02. Retrieved 2010-07-23. External link in
- "Panel Beater | How to get into this job". careers.govt.nz. Retrieved 2010-07-23.