OpenEmbedded is a build automation framework and cross-compile environment used to create Linux distributions for embedded devices. The OpenEmbedded framework is developed by the OpenEmbedded community, which was formally established in 2003. OpenEmbedded is the recommended build system of the Yocto Project, which is a Linux Foundation workgroup that assists commercial companies in the development of Linux-based systems for embedded products.
The build system is based on BitBake "recipes", which specify how a particular package is built, but also includes lists of dependencies and source code locations, as well as instructions on how to install and remove a compiled package. OpenEmbedded tools use these recipes to fetch and patch source code, compile and link binaries, produce binary packages (ipk, deb, rpm), and create bootable images.
Historically, OpenEmbedded's collection of recipes were stored in a single repository, and the metadata was structured in a form now called "OpenEmbedded-Classic". By 2010, it had become increasingly difficult to manage the ever-growing number of recipes. To resolve this, recipe metadata was split into multiple layers. The lowest layer, which includes platform-independent and distribution-independent metadata is called "OpenEmbedded-Core". Architecture-specific, application-specific and distribution-dependent instructions are applied in appropriate target support layers that can override or complement the instructions from lower layers. Additionally, changes to the recipes at the core layer are now managed with a pull model: instead of committing their changes directly to the repository (as was previously the case), developers now send their patches to the mailing list. The patches, if approved, are then merged (pulled) by a maintainer.
This section needs expansion. You can help by adding to it. (August 2011)
The OpenEmbedded Project (OE for short) was created by Chris Larson, Michael Lauer, and Holger Schurig, merging the achievements of OpenZaurus with contributions from projects like Familiar Linux and OpenSIMpad into a common codebase. OpenEmbedded superseded these projects and was used to build any of them from the same code base. Stable maintenance builds exist for the old OpenEmbedded-Classic, although most development is, or will be, based on the new OpenEmbedded-Core in the future.
The OpenEmbedded-Core Project (OE-Core for short) resulted from the merge of the Yocto Project with OpenEmbedded. This is the most recent version of OpenEmbedded and many of the OE-dev recipes are available in OE-Core. Newer versions of package recipes may only get ported for OpenEmbedded-Core.
OpenEmbedded-Core has adapted this layered structure in the merge with Yocto and new layer entries were added over time. The Layers represent a structure which is only of declarative nature. The specific entries are stricter in the scope of deciding which entry provides which packages. Overview of layers is available in: layers
- Developer layer
- The user-defined layer for custom Bitbake recipes. Embedded system software developers would place their recipe here if the software would not fit the commercial or base layer.
- Commercial layer
- Packages, plugins and configurations from open source vendors go in this layer.
- UI-specific layer
- Layers currently present within the meta-openembedded layer:
- Hardware-specific layer
- meta-efikamx (Efika devices)
- meta-fsl-arm (Freescale Semiconductor officially supported development boards)
- meta-fsl-arm-extra (Freescale Semiconductor community supported boards)
- meta-handheld (Personal digital assistants, PDAs)
- meta-intel (Intel embedded devices)
- meta-nslu2 (NSLU2 devices)
- meta-openpandora (Openpandora devices)
- meta-smartphone (various smartphone devices)
- meta-ti (Texas Instruments devices)
- meta-xilinx (Xilinx devices)
- meta-altera (Altera devices)
- meta-ettus (Ettus Research USRP SDR devices)
- OpenEmbedded-Core layer
In OpenEmbedded-Classic, the configurations from Base- to the UI-Layer can be supplemented by various Linux distributions. The following list is available for OpenEmbedded:
Various devices are supported:
- Boards and processors
- The BeagleBoard from Texas Instruments, the Gumstix, Nvidia Tegra and several I.MX devices (e.g. I.MX28 series) from Freescale Semiconductor are supported.
- Other well known boards like the PandaBoard are also supported.[improper synthesis?][improper synthesis?] along with other hardware.
- Some devices of the IBM PowerPC series are supported by OpenEmbedded.
- "OpenEmbedded Developers". Archived from the original on 2012-11-09.
- Brake, Cliff; et al. (2015), "Welcome to OpenEmbedded", OpenEmbedded Wiki, Blacksburg, VA: openembedded.org.
- Eggleton, Paul (2015), "OpenEmbedded-Core", OpenEmbedded Wiki, Blacksburg, VA: openembedded.org.
- "2011.03-maintenance". Archived from the original on 2012-11-09. Retrieved 2011-09-30.
- "Yocto Project Aligns Technology with OpenEmbedded and Gains Corporate Collaborators". Archived from the original on 2012-01-11.
- Yocto & OpenEmbedded Core Layers Archived 2011-09-19 at the Wayback Machine
- "OpenEmbedded Metadata Index - layers". Archived from the original on 2013-06-22. Retrieved 2013-06-18.
- Ben Combee on Palm Developer Forum - Fri Jul 16, 2010. Building static libs Archived 2011-07-26 at the Wayback Machine
- "B2C Info Solutions".
- "Overview of OE supported machines". Archived from the original on 2011-09-28. Retrieved 2011-09-30.
- Using OpenEmbedded build system for Gumstix Archived 2011-09-02 at the Wayback Machine
- "TI Gumstix OpenEmbedded development environment". Archived from the original on 2019-05-15. Retrieved 2019-11-28.
- Unofficial OpenEmbedded I.MX28 support Archived 2012-04-07 at the Wayback Machine
- "PandaBoard". Archived from the original on 2015-12-31.
- "OMAP Angstrom Main".
- Power.org devcon 07 OpenEmbedded presentation Archived 2012-03-29 at the Wayback Machine
- Yocto Project Board Support Package guide
- "Yocto Project Development Manual".