Nissan VR engine
The VR is a series of twin-turbo DOHC V6 automobile engines from Nissan with displacements varying from 3.0 to 3.8 L (2,997 to 3,799 cc). An evolution of the widely successful VQ series, it also draws on developments from the VRH, JGTC, and Nissan R390 GT1 Le Mans racing engines.
|Nissan VR engine|
|Manufacturer||Nissan (Nissan Machinery)|
|Displacement||3.0 L (2,997 cc)|
3.8 L (3,799 cc)
|Cylinder bore||86 mm (3.39 in)|
95.5 mm (3.76 in)
|Piston stroke||86 mm (3.39 in)|
88.4 mm (3.48 in)
|Valvetrain||DOHC, 4 valves x cyl.|
|Compression ratio||9.0:1, 10.3:1|
|Fuel system||Fuel injection/Direct injection|
|Dry weight||429.5 lb (194.8 kg)|
608 lb (276 kg)
|Predecessor||Nissan VQ engine, RB26DETT|
Announced by Infiniti on December 15, 2015 the VR30DDTT was first made available in the Infiniti Q50 sedan, followed by the Infiniti Q60 coupé a year later. Both platforms come in a 300 and 400 hp (224 and 298 kW) version. It is on the Ward's 10 Best Engines list for 2017 and 2018.
- Aluminium block with arc sprayed mirror coating to cylinder bores
- Aluminium cylinder head
- Lightweight resin intake and lower oil pan
- Compact twin direct-mount turbos with integrated exhaust manifold and electronic wastegate actuator
- Twin water-to-air charge coolers with one 300 hp (224 kW)/two 400 hp (298 kW) water pumps
- Electronically controlled variable displacement oil pump
- Intake: electronic Variable valve timing Control (VTC)
- Exhaust: hydraulic continuously variable VTC
- Fuel system: direct injection
The VR38DETT features 24 valves controlled by dual overhead camshafts (2 per cylinder head) with variable valve timing on the intake only. The block is cast aluminium with 0.15 mm (0.0059 in) plasma-sprayed cylinder liner bores. This coating provides a hard protective layer for the piston rings to slide on as the piston moves up and down during its power cycle. The turbine housings for the two IHI turbochargers are integrated into the exhaust manifolds to decrease weight and bolster vehicle balance. The engine also features a pressurized lubrication system controlled thermostatically. The VR38DETT is equipped with a feedback control system that changes air fuel ratio depending on the engine load which has a significant effect on reducing the fuel consumption.
Other pertinent features of the VR38DETT include:
- Continuously variable valve timing control system (CVTCS) on intake valves
- Aluminum cylinder block with high-endurance/low-friction plasma-sprayed bores
- Iridium-tipped spark plugs
- Electronic drive-by-wire throttle
- Multi port fuel injection
- Pressurized lubrication system with thermostatically controlled cooling and magnesium oil sump
- Fully symmetrical dual intake and low back-pressure exhaust system
- Secondary air intake system to rapidly heat catalysts to peak cleaning efficiency
- 50 State LEV2/ULEV
|2008–2011||Nissan GT-R CBA-R35||480–485 hp (358–362 kW)|
|2012–present||Nissan GT-R DBA-R35||530–565 hp (395–421 kW)|
|2014–present||Nissan GT-R Nismo||600 hp (447 kW)|
|2012–present||Nissan Juke-R (limited production run)|
|2014||Infiniti Q50 Eau Rouge Prototype||560 hp (418 kW)|
|2019–||Scuderia Cameron Glickenhaus SCG 004S||690 hp (515 kW)|
|2012–present||Nissan GT-R Nismo GT3||500 hp (373 kW)|
|2014–present||Renault R.S. 01||500 hp (373 kW)+|
|2017–present||Nissan Onroak DPi (Ligier JS P217)|
VR38DETT NISMO Engine Tuning Menu Concept (2016)Edit
It is a version of VR38DETT engine used in Nissan GT-R, with GT3-spec camshaft, connecting rod and connecting rod bolt, intercooler, intercooler piping, turbocharger, NISMO 1st and 2nd catalyzers, titanium muffler.
|Engine code||Vehicle||Year||Displacement||Bore x stroke||Weight||C.R.||Max. power||Max. torque||Features|
|VR38DETT||Nissan GT-R||2007–current||3,799 cc (3.8 L; 231.8 cu in)||95.5 mm × 88.4 mm (3.76 in × 3.48 in)||approx.608 lb (276 kg)||9.0:1||approx. 480–565 hp (358–421 kW) @ 6400 rpm
600 hp (447 kW) @ 6800 rpm (NISMO)
|588–652 N⋅m (434–481 lbf⋅ft) @ 3200-6000 rpm||DOHC per bank|
Variable inlet cam phasing
|VR30DDTT||Infiniti Q50||2016–current||2,997 cc (3.0 L; 182.9 cu in)||86 mm × 86 mm (3.39 in × 3.39 in)||approx.429.5 lb (194.8 kg)||10.3:1||approx. 400 hp (298 kW) @ 6400 rpm (High Output)
300 hp (224 kW) @ 6400 rpm (Standard Output)
|475 N⋅m (350 lbf⋅ft) @ 1600-5200 rpm (High output)
400 N⋅m (295 lbf⋅ft) @ 1600-5200 rpm (standard output)
|High pressure multi-split direct injection|
DOHC per bank
Variable inlet and outlet cam phasing
- 2016 Infiniti Q50 3.0t spec sheet
- "Infiniti announces new 3.0-liter V6 twin-turbo engine – the most advanced V6 ever offered by Infiniti". Nissan Online Newsroom. Retrieved 2015-12-16.
- "Infiniti VR 3.0-liter V6 Twin-Turbo Specifications". Infiniti.
- "3.0-liter V6 twin-turbo engine: the most advanced V6 for Infiniti".
- "Production of Infiniti's 'VR30' twin turbo 3.0-liter V6 engine begins in Japan".
- "日産：NISSAN GT-R [ GT-R ] スポーツ＆スペシャリティ/SUV Webカタログ ホーム". .nissan.co.jp. 2007-10-24. Archived from the original on 2011-09-28. Retrieved 2010-03-26. Cite uses deprecated parameter
- JDM Spec Engines - Nissan VR38DETT Engine
- "VR38DETT engine weight | 2009 Nissan GT-R". 2009gtr.com. 2008-02-28. Retrieved 2010-03-26.
- مجلة أفكار العربية : Nissan GT-R Nismo VR38DETT Engine Tuning Menu Concept - Tokyo Auto Salon 2016
- Where Are Nissan Cars Built? A Nissan Car FAQ