Modular Integrated Communications Helmet
This article needs additional citations for verification. (February 2013) (Learn how and when to remove this template message)
The Modular Integrated Communications Helmet (MICH) is a U.S. combat helmet and one of several used by the U.S. military. It was developed by the United States Army Soldier Systems Center to be the next generation of protective combat helmets for use by the U.S. Army.
|Modular Integrated Communications Helmet|
|Place of origin||United States of America|
|In service||January 2001 – present|
|Used by||See Users|
|Designer||United States Army Soldier Systems Center|
|Manufacturer||Made by numerous manufacturers like MSA Gallet and Gentex|
|Produced||January 2001 – present|
|Weight||1.36 kg (3.0 lb) to 1.63 kg (3.6 lb), depending on size|
The MICH was originally part of a series of combat helmets designed for the U.S. Army Special Operations Command as a replacement for the PASGT helmet and the various non-ballistic skateboard, bicycle, and whitewater "bump" helmets solely within those units. Development was done from 1997 before it was released in January 2001 by the United States Army Soldier Systems Center.
The main reason for the development of the MICH was due to the protective but heavy PASGT being supplanted by these bump helmets by special forces operators due to them being lighter, more comfortable, closer-fitting, and made of plastic making them easier to mount accessories onto, especially night vision devices and communications headsets. The lighter weight and non-ballistic nature of these helmets allowed the fitting of additional accessories without putting undue strain on the neck or requiring the drilling of holes through Kevlar to affix night vision mounting brackets, compromising the Kevlar helmet's protective ability if not done precisely. Inevitably, operators suffered injury and deaths due to taking their wholly unsuited plastic helmets into the unforgiving environment of close-quarters warfare, especially the 1993 Battle of Mogadishu where at least one special forces operator (either SFC Shughart or MSGT Gordon) was supposedly killed by a rifle shot to the head. While no ballistic helmet of the time (or even the present time) could protect from rifle fire in close-quarters combat, it inspired the U.S. Army to create a new helmet to better protect special forces in direct action missions while providing the weight and modularity they desired that caused them to cease using the PASGT in the first place.
An initial stop-gap solution was provided in the RBR helmet, which is difficult to find information on but appears to be derived from the French SPECTRA helmet; it particularly resembles the Canadian CG634, which is a derivative. Meanwhile, development was under way of a purpose-built helmet under the SPEAR program, which eventually produced the MICH in the late 1990s and offered in three cuts to allow operator choice in balancing protection and weight to suit their preferences and mission profile. While it did not entirely replace the plastic bump helmets, it replaced them almost completely in direct action missions where operators are most likely to suffer head injury from fragments, concussive force, or bullets. Initially, it was used almost exclusively by SOCOM and some units with close ties to them; however, the U.S. Army later determined that the improvements presented by the lighter, higher-cut, and brim-less MICH over the PASGT helmet warranted organization-wide distribution, and began to release examples to the Army at large as a more cost-effective solution to reequipping the entire Army.
To date, the MICH and its derivatives, the Advanced Combat Helmet and Enhanced Combat Helmet have fully replaced the PASGT in active U.S. Army service and is in use with all branches of the U.S. military in at least some capacity.
The U.S. Marine Corps evaluated the MICH during its own search for a PASGT replacement, but chose to adopt a helmet that retains the profile of the PASGT but is lighter, known as the Lightweight Helmet, which incorporates improvements in the MICH such as the liner and retention system.
The MICH ranges in weight from about 3 lb (1.36 kg) (size medium) to just over 3.6 lb (1.63 kg) (extra large). It uses a new, more advanced type of Kevlar and provides increased protection against handgun rounds.
A pad system and four-point retention system, similar to the cushions and straps found on the aforementioned skate, bicycle, and water helmets, replaces the nylon cord suspension system, sweatband and chinstrap found on the PASGT helmet. The change provides greater impact protection and comfort for the wearer. It can be fitted with a mounting bracket for a night vision device on the front, such as the AN/PVS-14 or AN/PVS-15, similar to that on the PASGT helmet. It can also be fitted with a pair of straps on the rear to keep protective eyewear in place, as well as cloth helmet covers in varying camouflage patterns including M81 Woodland, three-color desert, USMC MARPAT, U.S. Army UCP, Crye MultiCam, and solid black for use with SWAT teams, among numerous other patterns available commercially. As with its PASGT predecessor, the MICH is often worn with a band around it which features a pair of "cat eyes"—patches, some purely reflective and some also slightly luminous, on the back intended to prevent friendly fire incidents.
The MICH is also slightly smaller than the PASGT, providing 8% less coverage; this is primarily in the elimination of the brow and raising of the sides to the point that the lower brim behind the temple is "flat", compared to the "curved" profile of the PASGT. This accounts for some of the reduced weight and allows for both greater situational awareness and less obstruction of the wearer's vision, particularly when combined with Interceptor Body Armor.
Previously, soldiers had complained that the high collar of the Interceptor combined with the two-point chinstrap pushed the back of the PASGT helmet forward, in turn moving the helmet brim over their eyes when they attempted to fire from a prone position, this is rectified in the MICH with its reduced profile and four-point chinstrap.
The baseline "Full cut" helmet, which has a four-point chin strap and seven pads worn inside.
The second cut known as "High cut", which removes all ear protection allowing for even more headset options at the cost of all side protection.
The third cut known "Gunfighter cut", which raises the area around the ears by about 1/2", allowing for a wider range of headsets to be used and roughly meeting the profile of the skateboard and whitewater helmets previously used by special forces.
Advanced Combat HelmetEdit
Enhanced Combat HelmetEdit
The Enhanced Combat Helmet is identical in shape to the Advanced Combat Helmet but thicker and made with lighter materials. It is set to replace LWH in use by the United States Marine Corps and the ACH and MICH 2000 helmets of the U.S Army, Air Force, and Navy.
In 2015, China has released a clone of the MICH in the 2015 China Victory Day Parade domestically and overseas during the Peace and Friendship 2015 exercises overseas, which is based on the TC-2001 variant as an initial prototype. Known as the QGF11, it's made up of composite carbon fiber material. It's known to be issued with the PLA Marine Corp and People's Armed Police special police units.
This section needs expansion. You can help by adding to it. (September 2017)
- Australia: MICH 2000 variant made by Rabintex, Israel used by all branches of Australian Defence Force and Specialist Response Group of the Australian Federal Police
- Brazil:
- Czech Republic: Small number used in the Czech military.
- Georgia: Copies of MICH are made by STC Delta.
- Germany: German-made and South African-made MICH 2001 used by German Kommando Spezialkräfte (KSK) Special Forces. Bundeswehr paratroopers use the MICH 2000-style "Airborne 828" helmet and the MICH 2001-style "Airborne 828 Tactical Cut" helmet by Schuberth GmbH. Schuberth also make a standard MICH 2000 helmet.
- Ireland: Australian variant MICH 2000 made by Rabintex, Israel used by Irish Defence Force.
- Iraq: Used by Iraqi commandos.
- Israel: Used by Israeli special forces units alongside Ops-Core helmets.
- Lebanon: Used by the Lebanese Marine Comando regiment and the Lebanese Commando Regiment and the Air Assault Regiment. Also used by the Internal Security Forces (police) elite force.
- Netherlands: Known to be used by the Korps Commandotroepen in Afghanistan.
- New Zealand: Australian MICH 2000 made by Rabintex, Israel used by all branches of New Zealand Defence Force and Special Tactics Group of the New Zealand Police.
- Serbia: Mile Dragic-made MICH 2002 helmets used by Serbian Gendarmerie.
- United States: Some MICH TC-2000/2001-type helmets use by the United States Marine Corps Forces Special Operations Command alongside Ops-Core-made FAST helmets and in some Marine expeditionary and Force Recon units. Used by the U.S. Air Force Security Forces. Also has some limited use by the United States Army Rangers, United States Navy SEALs, Delta Force, Green Berets.
- United Kingdom: Some MICH TC-2000 helmets used by the SAS and Special Forces Support Group.
- United States: Replaced in mainstream service by the ACH in U.S. Army service and by the LWH in USMC service, in turn both to be replaced by the ECH.
- "Composite Helmet, Ballistic helmets, Military helmets USA helmet, AMERICAN helmets helmet, Kevlar helmet". www.gostak.co.uk.
- Veterans, Hard Head. "Ballistic Military Helmets and Which One is Right for You!".
- "2 Evolution of Combat Helmets - Review of Department of Defense Test Protocols for Combat Helmets - The National Academies Press". doi:10.17226/18621.
- "Advanced Combat Helmet ACH".
- "Bullet stopper". www.natick.army.mil.
- Lightweight Ballistic Composites: Military and Law-Enforcement Applications, edited by Ashok Bhatnagarm, page 370.
- Helmets, World War. ".: World War Helmets - Casque MICH TC 2000 - ACH :". www.world-war-helmets.com.
- "Modular/Integrated Communications Helmet - CIE Hub". CIE Hub.
- Pike, John. "SPEAR Modular/Integrated Communications Helmet (MICH)". www.globalsecurity.org.
- "Canipe Correspondence - Helmets: State of the Art Then and Now - Soldier Systems Daily". soldiersystems.net.
- http://www.rabintex.com/ProductView.asp?ID=8[better source needed]
- http://www.delta.gov.ge/en/product/dh-mk-2/[better source needed]
- http://www.delta.gov.ge/en/product/dh-mk-3/[better source needed]
- https://www.bestprotection.de/koerperschutzsysteme/schutzhelme/gefechtshelme/1795-gefechtshelm-special-forces-helmet-ksk.html[better source needed]
- https://www.chk-shield.de/Helme/Gefechtshelme/Zebra-Armour-Special-Forces-Gefechtshelm-F6-NIJ3A.html[better source needed]
- https://www.schuberth.com/produkte/militaer/airborne-828.html[better source needed]
- https://www.schuberth.com/produkte/militaer/828-tactical-cut.html[better source needed]
- https://www.schuberth.com/produkte/militaer/3m-combat-ii.html[better source needed]
- http://www.gostak.co.uk/composites/ireland/[better source needed]
- November 27, 2016 (2016-11-27). "ISOF Arms & Equipment Part 1 – Personal Equipment – Armament Research Services". Armamentresearch.com. Retrieved 2018-08-13.
- Neville, Special Operations Forces in Iraq, page 62.
- http://www.nzdf.mil.nz/downloads/pdf/one-force/oneforceoct09.pdf[not in citation given]
- Eward, page 33.
- Ibid, page. 4
- Ibid, page 16-17.
- Neville, Special Operations Forces in Iraq, pages 60-61.
- Neville, SAS 1983-2014, pages 12, 23 and 26.
- Media related to Modular Integrated Communications Helmet at Wikimedia Commons