Millepora alcicornis, or sea ginger, is a species of colonial fire coral with a calcareous skeleton. It is found on shallow water coral reefs in the tropical west Atlantic Ocean. It shows a variety of different morphologies depending on its location. It feeds on plankton and derives part of its energy requirements from microalgae found within its tissues. It is an important member of the reef building community and subject to the same threats as other corals. It can cause painful stings to unwary divers.
| Millepora alcicornis | |
|---|---|
.jpg)
| |
Scientific classification 
| |
| Domain: | Eukaryota |
| Kingdom: | Animalia |
| Phylum: | Cnidaria |
| Class: | Hydrozoa |
| Order: | Anthoathecata |
| Family: | Milleporidae |
| Genus: | Millepora |
| Species: | M. alcicornis
|
| Binomial name | |
| Millepora alcicornis | |
| Synonyms[2] | |
|
List
| |
Taxonomy edit
Millepora alcicornis is not a true coral in class Anthozoa but is in class Hydrozoa, and is more closely related to jellyfish than stony corals. Because of the variability in growth habit that this coral exhibits, it has been the subject of much confusion as to its taxonomy, being described under a number of different names from different localities. In 1898, Hickson decided that the variations in morphology were due to environmental factors and that Millepora alcicornis was the valid name for all these species. This conclusion has since been questioned.[3]
The species was first described by Carl Linnaeus in his landmark 1758 10th edition of Systema Naturae, but his type locality is unknown.[3] The scientific name comes from the Latin with Millepora meaning "thousand-pored" and alcicornis meaning "elk-horned". It seems likely that the type locality is in fact the West Indies. Explaining this in 1941 Crossland wrote "I cannot resist the remark that the one thing quite certain about the many forms of Millepora is that none of them have any resemblance to an elk's horn, except perhaps that from the West Indies".[3]
Description edit
The morphology of Millepora alcicornis is very variable. Most colonies probably start as encrusting forms and adopt a branching structure as they grow. The encrustations can become established on a variety of structures, not only on coral reefs and rocks but also on dead corals and the hulls of wrecked ships. Later development is in the form of plates or blades in habitats with much water movement such as the surf-pounded outer edges of reefs. In calmer waters, such as in deep lagoons or more sheltered parts of the reef, a more upright, leafy or branched structure develops which can grow to 50 centimetres (20 in) tall.[4][5] The habit of growth is also influenced by the inclination of the surface on which the fire coral grows. On vertical surfaces, the encrusting bases are larger with longer perimeters and the density of branching is lower than it is on horizontal surfaces.[6] The cylindrical branches usually grow in a single plane and span a range of hues from brown to pale, cream-like yellow, while branch tips are white.[4][5]
Embedded in the calcareous skeleton are numerous microscopic polyps. They are connected internally by a system of canals and are concealed behind pores in the skeleton, the surface of which is smooth and lacks the corallites of true stony corals. The polyps have specialist functions, the gastrozooids processing and digesting the food caught by the dactylozooids which are grouped around them. The gastrozooids are small and plump and extend four to six tentacle stubs through their pores but are otherwise invisible. The dactylozooids have hairlike tentacles covered in cnidoblasts. Stings from the cnidocysts immobilize an item of prey and the tentacles thrust it through the mouth of an adjacent gastrozooid, from where it passes into the stomach for digestion. The polyps also extrude the coenosteum, the calcareous material of which the skeleton is composed. The coenosteum contains certain symbiotic microalgae called zooxanthellae. These are photosynthetic organisms which provide their hosts with energy and in return benefit from a protective environment in a well lit position.[4] About 75% of the fire coral's energy requirements are provided by the zooxanthellae.[7]
Distribution edit
Millepora alcicornis is found in the Caribbean Sea, the Gulf of Mexico, Florida, the Cape Verde Islands and along the coast of Central and South America as far south as Brazil. It has also been found in Bermuda, but the morphology at that location is so different from that in the rest of its range that it may be a distinct species.[8] It grows at depths of up to 40 metres (130 ft) and is the only fire coral that often grows at depths greater than 10 metres (33 ft).[5]
Biology edit
Millepora alcicornis feeds on plankton. The tentacles of the dactylzooids are normally extended all the time. If an object is waved about above the coral, it will cause the tentacles to retract and then the coral can be handled without experiencing the painful stings caused by the cnidocytes.[7]
Reproduction is by either asexual or sexual means. Parts of the coral may get detached from the colony by a storm or other means, and some of these fragments may end up in suitable locations to grow into new colonies which will be genetically identical to the parent colony. This fragmentation is probably the most frequent method of reproduction.[4] Alternatively, certain pores called ampullae contain polyps that bud off short-lived, jellyfish-like medusae, which separate from the colony. They produce gametes which, after fertilisation, develop into planula larvae. These drift with the currents as part of the zooplankton before settling out and developing into new colonies.[7]
Ecology edit
A number of species of shrimp and fish take refuge among the branches of Millepora alcicornis, seemingly immune to the venom. Hawkfish in particular often perch on top of the fire coral, perhaps protected by their skinless pectoral fins. Perhaps unsurprisingly, Millepora alcicornis has few predators. The fireworm (Hermodice carunculata) sometimes grazes on it, but prefers other corals. Certain nudibranchs in the genus Phyllidia eat it as do filefish in the family Monacanthidae.[7]
It has been found that when Millepora alcicornis grows in close proximity to an arborescent gorgonian sea fan, the fire coral becomes aggressive. It produces "attack" branches which grow out sideways towards the sea fan, develop into hand-like structures and encircle and smother it. The fire coral then uses it as a substrate for new growth. Sometimes this new growth gets separated from the parent colony, and a new colony of fire coral is formed, genetically identical to the original one. This aggressive action is specific to gorgonians and does not happen in response to the close presence of other live or dead corals, other sessile invertebrates or open water. The fire coral seems to be able to detect the gorgonian's presence as a result of water flowing over the surfaces of both.[9]
Threats edit
Although not a true coral, Millepora alcicornis is subject to the same general threats that corals and coral reefs are facing. The greatest of these is global warming and the consequent rise in sea temperatures. Millepora alcicornis is one of the first corals to show bleaching as the symbiont zooxanthellae are killed. However, it is also more resilient than most and becomes re-established by recruitment earlier than the scleractinian corals. Other general threats to reefs include ocean acidification, pollution, sedimentation, invasive species and other changes in species dynamics, coral diseases, fisheries, leisure activities and tourism. Small quantities of Millepora alcicornis are gathered for sale to collectors.[1]
Human interactions edit
The cnidocytes of Millepora alcicornis are powerful enough to sting human skin. They can inject a venom that causes a painful burning sensation, skin eruptions, blisters and scarring.[4] The toxin has been investigated and is a water-soluble protein, 40 μg of which provides a median lethal dose to mice weighing 20 grams (0.71 oz).[10]
Millepora alcicornis has no commercial uses but is sometimes kept in reef aquaria. It requires high water movement and bright light to flourish and its health can be judged by its colour, a yellow hue showing health whereas a darker brown colour can indicate too little light. It can be difficult to control because it grows fast and spreads over other objects in the tank.[7]
References edit
- ^ a b Sweet, M.; Nunes, F.; Kitahara, M.V. (2022). "Millepora alcicornis". IUCN Red List of Threatened Species. 2022: e.T133144A179620187. Retrieved 1 January 2023.
- ^ a b Schuchert, Peter (2010). "Millepora alcicornis Linnaeus, 1758". WoRMS. World Register of Marine Species. Retrieved 2012-01-02.
- ^ a b c Boschma, H. "The species problem in Millepora": 3–18. Retrieved 2012-01-03.
{{cite journal}}: Cite journal requires|journal=(help) - ^ a b c d e Fire Coral (Millepora alcicornis) Marine Invertebrates of Bermuda. Retrieved 2012-01-02.
- ^ a b c Branching fire coral (Millepora alcicornis) Marine Species Identification Portal. Retrieved 2012-01-03.
- ^ Edmunds, P. J. (1998). "The role of colony morphology and substratum inclination in the success of Millepora alcicornis on shallow coral reefs". Coral Reefs. 18 (2): 133–140. doi:10.1007/s003380050167. S2CID 36732574.
- ^ a b c d e Venomous corals: The fire corals Coralmania. Retrieved 2012-01-02.
- ^ Sterrer, Wolfgang; Christiane Schoepfer-Sterrer (1986). Marine fauna and flora of Bermuda. Wiley. p. 134.
- ^ Wahle, Charles M. (1980). "Detection, Pursuit, and Overgrowth of Tropical Gorgonians by Milleporid Hydrocorals: Perseus and Medusa Revisited". Science. 209 (4457): 689–691. Bibcode:1980Sci...209..689W. doi:10.1126/science.209.4457.689. PMID 17821191. S2CID 45798252.
- ^ Wittle, Lawrence W.; Robert E. Middlebrook; Charles E. Lane (1971). "Isolation and partial purification of a toxin from Millepora alcicornis". Toxicon. 9 (4): 327–331. doi:10.1016/0041-0101(71)90129-2. PMID 4399390.
External links edit
