In version control, merging (also called integration) is a fundamental operation that reconciles multiple changes made to a version-controlled collection of files. Most often, it is necessary when a file is modified on two independent branches and subsequently merged. The result is a single collection of files that contains both sets of changes.
In some cases, the merge can be performed automatically, because there is sufficient history information to reconstruct the changes, and the changes do not conflict. In other cases, a person must decide exactly what the resulting files should contain. Many revision control software tools include merge capabilities.
Types of merges edit
There are two types of merges: unstructured and structured.
Unstructured merge edit
Unstructured merge operates on raw text, typically using lines of text as atomic units. This is what Unix tools (diff/patch) and CVS tools (SVN, Git) use. This is limited, as a line of text does not represent the structure of source code.
Structured merge edit
Structured merge tools, or AST merge, turn the source code into a fully resolved AST. This allows for a fine-grained merge that avoid spurious conflicts.
Automatic merging is what version control software does when it reconciles changes that have happened simultaneously (in a logical sense). Also, other pieces of software deploy automatic merging if they allow for editing the same content simultaneously. For instance, Wikipedia allows two people to edit the same article at the same time; when the latter contributor saves, their changes are merged into the article instead of overwriting the previous set of changes. Manual merging is what people have to resort to (possibly assisted by merging tools) when they have to reconcile files that differ. For instance, if two systems have slightly differing versions of a configuration file and a user wants to have the good stuff in both, this can usually be achieved by merging the configuration files by hand, picking the wanted changes from both sources (this is also called two-way merging). Manual merging is also required when automatic merging runs into a change conflict; for instance, very few automatic merge tools can merge two changes to the same line of code (say, one that changes a function name, and another that adds a comment). In these cases, revision control systems resort to the user to specify the intended merge result.
Merge algorithms edit
There are many different approaches to automatic merging, with subtle differences. The more notable merge algorithms include three-way merge, recursive three-way merge, fuzzy patch application, weave merge, and patch commutation.
Three-way merge edit
A three-way merge is performed after an automated difference analysis between a file "A" and a file "B" while also considering the origin, or common ancestor, of both files "C". It is a rough merging method, but widely applicable since it only requires one common ancestor to reconstruct the changes that are to be merged. Three way merge can be done on raw text (sequence of lines) or on structured trees.
The three-way merge looks for sections which are the same in only two of the three files. In this case, there are two versions of the section, and the version which is in the common ancestor "C" is discarded, while the version that differs is preserved in the output. If "A" and "B" agree, that is what appears in the output. A section that is the same in "A" and "C" outputs the changed version in "B", and likewise a section that is the same in "B" and "C" outputs the version in "A".
Sections that are different in all three files are marked as a conflict situation and left for the user to resolve.
Three-way merging is implemented by the ubiquitous diff3 program, and was the central innovation that allowed the switch from file-locking based revision control systems to merge-based revision control systems. It is extensively used by the Concurrent Versions System (CVS).
Recursive three-way merge edit
Three-way merge based revision control tools are widespread, but the technique fundamentally depends on finding a common ancestor of the versions to be merged.
There are awkward cases, particularly the "criss-cross merge", where a unique last common ancestor of the modified versions does not exist.
Fortunately, in this case it can be shown that there are at most two possible candidate ancestors, and recursive three-way merge constructs a virtual ancestor by merging the non-unique ancestors first. This merge can itself suffer the same problem, so the algorithm recursively merges them. Since there is a finite number of versions in the history, the process is guaranteed to eventually terminate. This technique is used by the Git revision control tool.
(Git's recursive merge implementation also handles other awkward cases, like a file being modified in one version and renamed in the other, but those are extensions to its three-way merge implementation; not part of the technique for finding three versions to merge.)
Recursive three-way merge can only be used in situations where the tool has knowledge about the total ancestry directed acyclic graph (DAG) of the derivatives to be merged. Consequently, it cannot be used in situations where derivatives or merges do not fully specify their parent(s).
Fuzzy patch application edit
A patch is a file that contains a description of changes to a file. In the Unix world, there has been a tradition to disseminate changes to text files as patches in the format that is produced by "diff -u". This format can then be used by the patch program to re-apply (or remove) the changes into (or from) a text file, or a directory structure containing text files.
However, the patch program also has some facilities to apply the patch into a file that is not exactly similar as the origin file that was used to produce the patch. This process is called fuzzy patch application, and results in a kind of asymmetric three-way merge, where the changes in the patch are discarded if the patch program cannot find a place in which to apply them.
Like CVS started as a set of scripts on diff3, GNU arch started as a set of scripts on patch. However, fuzzy patch application is a relatively untrustworthy method, sometimes misapplying patches that have too little context (especially ones that create a new file), sometimes refusing to apply deletions that both derivatives have done.
Patch commutation edit
Patch commutation is used in Darcs to merge changes, and is also implemented in git (but called "rebasing"). Patch commutation merge means changing the order of patches (i.e. descriptions of changes) so that they form a linear history. In effect, when two patches are made in the context of a common situation, upon merging, one of them is rewritten so that it appears to be done in the context of the other.
Patch commutation requires that the exact changes that made derivative files are stored or can be reconstructed. From these exact changes it is possible to compute how one of them should be changed in order to rebase it on the other. For instance, if patch A adds line "X" after line 7 of file F and patch B adds line "Y" after line 310 of file F, B has to be rewritten if it is rebased on A: the line must be added on line 311 of file F, because the line added in A offsets the line numbers by one.
Patch commutation has been studied a great deal formally, but the algorithms for dealing with merge conflicts in patch commutation still remain open research questions. However, patch commutation can be proven to produce "correct" merge results where other merge strategies are mostly heuristics that try to produce what users want to see.
Weave merge edit
Weave merge is an algorithm that does not make use of a common ancestor for two files. Instead, it tracks how single lines are added and deleted in derivative versions of files, and produces the merged file on this information.
For each line in the derivative files, weave merge collects the following information: which lines precede it, which follow it, and whether it was deleted at some stage of either derivative's history. If either derivative has had the line deleted at some point, it must not be present in the merged version. For other lines, they must be present in the merged version.
The lines are sorted into an order where each line is after all lines that have preceded it at some point in history, and before all lines that have followed it at some point in history. If these constraints do not give a total ordering for all lines, then the lines that do not have an ordering with respect to each other are additions that conflict.
Weave merge was apparently used by the commercial revision control tool BitKeeper and can handle some of the problem cases where a three-way merge produces wrong or bad results. It is also one of the merge options of the GNU Bazaar revision control tool, and is used in Codeville.
See also edit
- Help:Edit conflict#Prevention
- Lindholm, Tancred (2004). "A three-way merge for XML documents". Proceedings of the 2004 ACM symposium on Document engineering. New York, New York, USA: ACM Press. pp. 1–10. doi:10.1145/1030397.1030399. ISBN 1581139381. S2CID 2863413.
- Cohen, Bram (2005-04-28). "The criss-cross merge case". Git (Mailing list). Message-ID <Pine.LNX.email@example.com>.