This article needs additional citations for verification. (June 2011) (Learn how and when to remove this template message)
A machine-check exception (MCE) is a type of computer hardware error that occurs when a computer's central processing unit detects a hardware error in the processor itself, the memory, the I/O devices, or on the system bus; in some architectures[a], an MCE only occurs for an unrecoverable error. On x86 architectures, a machine-check exception is not caused by software. However, on other architectures such as PowerPC, certain software bugs such as invalid memory accesses can cause machine-check exceptions. The error usually occurs due to component failure or the overheating or overclocking of hardware components. Most machine-check exceptions halt the operating system and require a restart before users can continue normal operation.[dubious ] Diagnosing the failure can be often difficult because so little information about what caused the problem is captured during the error.
Modern versions of Microsoft Windows on IA-32 and x86-64 processors handle machine-check exceptions through the Windows Hardware Error Architecture. When WHEA detects an uncorrectable machine check exception, it displays the error in a Blue Screen of Death, with the following parameters (which vary, but the first parameter is always 0x0 for a machine check exception):
*** STOP: 0x00000124 (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
STOP: 0x0000009C (0x00000030, 0x00000002, 0x00000001, 0x80003CBA)
On Linux, a process (such as
klogd) writes a message to the kernel log and/or the console screen (usually only to the console when the error is non-recoverable and the machine crashes as a result):
CPU 0: Machine Check Exception: 0000000000000004 Bank 2: f200200000000863 Kernel panic: CPU context corrupt
Most of these errors relate specifically to the Pentium processor family. Similar errors may occur on other processors and will cause similar problems.
Some of the main hardware problems that cause MCEs include:
Machine checks are a hardware problem, not a software problem. They are often the result of overclocking or overheating. In some cases, the CPU will shut itself off once passing a thermal limit to avoid permanent damage. But they can also be caused by bus errors introduced by other failing components, like memory or I/O devices. Possible causes include:
- Poor CPU cooling due to a CPU heatsink and case fans (or filters) that's clogged with dust or has come loose.
- Overclocking beyond the highest clock rate at which the CPU is still reliable.
- Failing motherboard.
- Failing processor.
- Failing memory.
- Failing I/O controllers, on either the motherboard or separate cards.
- Failing I/O devices.
- Inadequate or failing power supply.
Cooling problems are usually obvious upon inspection. A failing motherboard or processor can be identified by swapping them with functioning parts. Memory can be checked by booting to a diagnostic tool, like memtest86. Non-essential failing I/O devices and controllers can be identified by unplugging them if possible or disabling the devices to see if the problem disappears. If the failures typically only occur fairly soon after the OS is booted or not at all or not for days, it may be suggestive of a power supply issue. With a power supply problem, the failure often occurs when power demand peaks as the OS starts up any external devices for use.
For IA-32 and Intel 64 processors, consult the Intel 64 and IA-32 Architectures Software Developer's Manual Chapter 15 (Machine-Check Architecture), or the Microsoft KB Article on Windows Exceptions.
Programs to decode Intel and AMD MCEsEdit
- mcat: A Windows command-line program from AMD to decode MCEs from AMD K8, Family 0x10 and 0x11 processors.
- mcelog A Linux daemon by Andi Kleen to handle MCEs for modern x86 processors. mcelog can also decode machine checks.
- parsemce a Linux program by Dave Jones to decode MCEs from AMD K7 processors.
- mced a Linux program by Tim Hockin to gather MCEs from the kernel and alert interested applications. Note that it does not try to interpret the MCE data, it simply alerts other programs.
- On other architectures, an MCE may occur in order to log, e.g., a memory corrected by ECC.
- "Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR". MSDN. 2016-09-29. Retrieved 2017-07-13. CS1 maint: discouraged parameter (link)
- "Bug Check 0x9C: MACHINE_CHECK_EXCPETION". Microsoft Support. 2018-03-31. Retrieved 2018-03-31. CS1 maint: discouraged parameter (link)
- Steve Lord, Greg Wettstein. "klogd(8) - Linux man page". Retrieved 2017-07-13.
klogd is a system daemon which intercepts and logs Linux kernel messages.CS1 maint: discouraged parameter (link)
- "Machine Check Architecture". Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide, Part 2. Intel Corporation. November 2018.
- "Stop error message in Windows XP that you may receive: "0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151)"". MSDN. 2015-12-07. Retrieved 2017-07-13. CS1 maint: discouraged parameter (link)
- "mcelog: Advanced hardware error handling for x86 Linux". 2015-04-20. Retrieved 2017-07-13. CS1 maint: discouraged parameter (link)
- "parsemce: Linux Machine check exception handler parser". 2003-07-22. Retrieved 2017-07-13. CS1 maint: discouraged parameter (link)
- mcedaemon on GitHub