Open main menu

Wikipedia β

Lycopodium powder being used to demonstrate the power of a dust explosion

Lycopodium powder is a yellow-tan dust-like powder historically used as a flash powder.[1] It is composed of the dry spores of clubmoss plants, various fern relatives principally in the genera Lycopodium and Diphasiastrum. When mixed with air, the spores are highly flammable because of their high fat content and their large surface area per unit of volume — a single spore's diameter is about 33 micrometers (μm).[2] Preferred source species are Lycopodium clavatum (wolf's-foot clubmoss) and Diphasiastrum digitatum (common groundcedar) because these widespread and often locally abundant species are both prolific in their spore production and easy to collect.[citation needed]

Lycopodium has been used in fireworks and explosives, fingerprint powders, as a covering for pills, and as an ice cream stabilizer. Today, the principal use of the powder is to create flashes or flames that are large and impressive but relatively easy to manage safely in magic acts and for cinema and theatrical special effects. Lycopodium powder is also sometimes used as a lubricating dust on skin-contacting latex (natural rubber) goods, such as condoms and medical gloves.[3]

In physics experiments and demonstrations, lycopodium powder is used to make sound waves in air visible for observation and measurement, and to make a pattern of electrostatic charge visible. The powder is also highly hydrophobic; if the surface of a cup of water is coated with lycopodium powder, a finger or other object inserted straight into the cup will come out dusted with the powder but remain perfectly dry.

Because of the very small size of its particles, lycopodium powder can be used to demonstrate Brownian motion. A microscope slide, with or without a well, is prepared with a droplet of water, and a fine dusting of lycopodium powder is applied. Then, a cover-glass can be placed over the water and spore sample in order to reduce convection in the water by evaporation. Under several hundred diameters magnification, one will see in the microscope, when well focused upon individual lycopodium particles, that the spore particles "dance" randomly. This is in response to asymmetric collisional forces applied to the macroscopic (but still quite small) powder particle by microscopic water molecules in random thermal motion. The lycopodium particles appear to be "alive", but they are only inert particles being buffeted by forces which, again, because of the small size of the lycopodium particles, respond to the momentum applied to them, which does not quite average to zero in three dimensions. Thus, the particles move.

As a then-common laboratory supply, lycopodium powder was often used by inventors developing experimental prototypes. For example, Nicéphore Niépce used lycopodium powder in the fuel for the first internal combustion engine, the Pyréolophore, about 1807,[citation needed] and Chester Carlson used lycopodium powder in 1938 in his early experiments to demonstrate xerography.[4]


  1. ^ Photographic Times and American Photographer, vol.18. Scovill Manufacturing Company. 1888. p. 26. Retrieved 23 October 2017. 
  2. ^ Z. Živcová, E. Gregorová, W. Pabst; Porous alumina ceramics produced with lycopodium spores as pore-forming agents; Journal of Materials Science (2007), v 42, i 20, p 8760-8764. doi:10.1007/s10853-007-1852-y
  3. ^ Commercial uses – Lycopodium Powder. Natural History Museum.
  4. ^ Owen, David (2004). Copies in Seconds: How a Lone Inventor and an Unknown Company Created the Biggest Communication Breakthrough Since Gutenberg. New York: Simon & Schuster. ISBN 0-7432-5117-2.