List of EN standards

European Standards (abbreviated EN, from the German name Europäische Norm ("European Norm"))[1][2] are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).

EN 1–999Edit

  • EN 1: Flued oil stoves with vaporizing burners
  • EN 2: Classification of fires
  • EN 3: Portable fire extinguishers
  • EN 14: Dimensions of bed blankets
  • EN 19: Industrial valves – Marking of metallic valves
  • EN 20: Wood preservatives.
  • EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
  • EN 40-1: Lighting columns - Part 1: Definitions and terms
  • EN 40-2: Lighting columns - Part 2: General requirements and dimensions
  • EN 40-3-1: Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
  • EN 40-3-2: Lighting columns - Part 3-2: Design and verification - Verification by testing
  • EN 40-3-3: Lighting columns - Part 3-3: Design and verification - Verification by calculation
  • EN 40-4: Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • EN 40-5: Lighting columns - Part 5: Requirements for steel lighting columns
  • EN 40-6: Lighting columns - Part 6: Requirements for aluminium lighting columns
  • EN 40-7: Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
  • EN 54: Fire detection and fire alarm systems
  • EN 71: Safety of toys
  • EN 81: Safety of lifts
  • EN 115: Safety of escalators & Moving walks
  • EN 166: Personal eye protection. Specifications
  • EN 196: Methods for testing cement (10 parts)
  • EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements
  • EN 197-2: Cement – Part 2 : Conformity evaluation
  • EN 206-1: Concrete – Part 1: Specification, performance, production and conformity
  • EN 207: Classification and specifications of filters and eye protection against laser
  • EN 208: Classification of eye protection filters for laser alignment
  • EN 228: Specifications for automotive petrol
  • EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
  • EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests
  • EN 286: Simple unfired pressure vessels designed to contain air or nitrogen
    • Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
    • Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
  • EN 287: Qualification test of welders — Fusion welding
    • Part 1: Steels
  • EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
  • EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
  • EN 301 549: European standard for digital accessibility
  • EN 336: Structural timber — Sizes, permitted deviations
  • EN 338: Structural timber — Strength classes
  • EN 341: Personal protective equipment against falls from a height. Descender devices
  • EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs.
  • EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor
  • EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
  • EN 354: Personal protective equipment against falls from a height. Lanyards
  • EN 355: Personal protective equipment against falls from a height. Energy absorbers
  • EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
  • EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters
  • EN 361: Personal protective equipment against falls from a height. Full body harnesses
  • EN 362: Personal protective equipment against falls from a height. Connectors
  • EN 363: Personal protective equipment against falls from a height. Fall arrest systems
  • EN 374: Protective gloves against chemicals and micro-organisms
  • EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets, gloves, boots/gaiters.
  • EN 386: Glued laminated timber - Performance requirements and minimum production requirements
  • EN 388: Protective gloves against mechanical risks
  • EN 390: Glued laminated timber. Sizes. Permissible deviations
  • EN 391: Glued laminated timber - Delamination tests of glue lines
  • EN 392: Glued laminated timber - Shear test of glue lines
  • EN 397: Specification for industrial safety helmets
  • EN 403: Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking.
  • EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties
  • EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
  • EN 420: Protective gloves. General requirements and test methods
  • EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
  • EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994)
  • EN 450: Fly ash for concrete - Definitions, requirements and quality control
  • EN 474: Earth-moving Machinery. Safety. General Requirements
  • EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
  • EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)
  • EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods
  • EN 590: Specification for automotive diesel
  • EN 631: Containers for foodstuffs
  • EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
  • EN 716: Children's cots and folding cots for domestic use
  • EN 795: Protection against falls from a height. Anchor devices. Requirements and testing
  • EN 805: Water supply. Requirements for systems and components outside buildings
  • EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses
  • EN 837: Pressure connections
  • EN 840: Mobile waste containers.
  • EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
  • EN 926-1: Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
  • EN 926-2: Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
  • EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
  • EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
  • EN 980: Symbols for use in the labeling of medical devices

EN 1000–1989Edit

  • EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
  • EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
  • EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
  • EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
  • EN 1010-5: Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board
  • EN 1069: Water slides of 2 m height and more
  • EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates
  • EN 1090: Execution of steel structures and aluminium structures (3 parts)
  • EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
  • EN 1168: Precast concrete products - Hollow core slabs
  • EN 1176-1: Playground equipment. General safety requirements and test methods
  • EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
  • EN 1325:2014: Value Management. Vocabulary. Terms and definitions
    • EN 1325-1:1997 Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis (withdrawn, replaced by EN 1325:2014) [3]
  • EN 1337: Structural bearings
  • EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
  • EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
  • EN 1466: Child use and care articles - Carry cots and stands - Safety requirements and test methods
  • EN 1496: Personal fall protection equipment. Rescue lifting devices
  • EN 1679: Reciprocating internal combustion engines: Compression ignition engines
  • EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
  • EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
  • EN 1846: Firefighting and rescue service vehicles
  • EN 1888-1: Child use and care articles - Wheeled child conveyances (Part 1: Pushchairs and prams—Up to 15 kg)
  • EN 1888-2: Child use and care articles - Wheeled child conveyances (Part 2: Pushchairs for children above 15 kg up to 22 kg)
  • EN 1891: Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
  • EN 1972: Diving equipment - Snorkels - Requirements and test methods

EN 1990–1999 (Eurocodes)Edit

  • EN 1990: (Eurocode 0) Basis of structural design
  • EN 1991: (Eurocode 1) Actions on structures
  • EN 1992: (Eurocode 2) Design of concrete structures
  • EN 1993: (Eurocode 3) Design of steel structures
  • EN 1994: (Eurocode 4) Design of composite steel and concrete structures
  • EN 1995: (Eurocode 5) Design of timber structures
  • EN 1996: (Eurocode 6) Design of masonry structures
  • EN 1997: (Eurocode 7) Geotechnical design
  • EN 1998: (Eurocode 8) Design of structures for earthquake resistance
  • EN 1999: (Eurocode 9) Design of aluminium structures

EN 10000–10999Edit

This range includes almost exclusively CEN Standards related to iron and steel.

  • EN 10002: Metallic Materials - Tensile Testing
    • EN 10002-1: Method of Test at Ambient Temperature
    • EN 10002-5: Method of testing at elevated temperatures
  • EN 10024: Hot rolled taper flange I sections. Tolerances on shape and dimensions
  • EN 10025: Hot rolled products of structural steels
    • EN 10025-1: Part 1: General technical delivery conditions
    • EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
    • EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    • EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
    • EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
    • EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
  • EN 10027: Designation systems for steel.[4]
    • EN 10088-1 Stainless steels - Part 1: List of stainless steels
    • EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    • EN 10088-3 Stainless steels - Part 3: Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    • EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes;
  • EN 10149: Hot rolled flat products made of high yield strength steels for cold forming.
    • EN 10149-1: General technical delivery conditions
    • EN 10149-2: Technical delivery conditions for thermomechanically rolled steels
    • EN 10149-3: Technical delivery conditions for normalized or normalized rolled steels
  • EN 10204: Metallic products - Types of inspection documents
  • EN 10216: Seamless steel tubes for pressure purposes
    • EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
    • EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
    • EN 10216-3: Part 3: Alloy fine grain steel tubes
    • EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
    • EN 10216-5: Part 5: Stainless steel tubes
  • EN 10217: Welded steel tubes for pressure purposes
    • EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
    • EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
    • EN 10217-3: Part 3: Alloy fine grain steel tubes
    • EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
  • EN 10220: Seamless and welded steel tubes — Dimensions and masses per unit length
  • EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
  • EN 10305: Steel tubes for precision applications — Technical delivery conditions
    • Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
    • Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

EN 12080, Railway applications — Axleboxes — Rolling bearings

  • EN 10357: Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
  • EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses

EN 11000–19999Edit

  • EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
  • EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
  • EN 12104: Resilient floor coverings - Cork floor tiles - Specification
  • EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
  • EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
  • EN 12221: Changing units for domestic use
  • EN 12246: Quality classification of timber used in pallets and packaging
  • EN 12255: Wastewater treatment plants
    • EN 12255-1: Part 1: General construction principles
    • EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
    • EN 12255-3: Part 3: Preliminary treatment
    • EN 12255-4: Part 4: Primary settlement
    • EN 12255-5: Part 5: Lagooning processes
    • EN 12255-6: Part 6: Activated sludge process
    • EN 12255-7: Part 7: Biological fixed-film reactors
    • EN 12255-8: Part 8: Sludge treatment and storage
    • EN 12255-9: Part 9: Odour control and ventilation
    • EN 12255-10: Part 10: Safety principles
    • EN 12255-11: Part 11: General data required
    • EN 12255-12: Part 12: Control and automation
    • EN 12255-13: Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
    • EN 12255-14: Part 14: Disinfection
    • EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
    • EN 12255-16: Part 16: Physical (mechanical) filtration
  • EN 12277: Mountaineering and climbing harnesses
  • EN 12281: Printing and business paper. Requirements for copy paper.
  • EN 12345: Welding. Multilingual terms for welded joints with illustrations
  • EN 12492: Helmets for mountaineering
  • EN 12566: Small wastewater treatment systems for up to 50 PT
    • EN 12566-1: Part 1: Prefabricated septic tanks
    • EN 12566-2: Part 2: Soil infiltration systems
    • EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants
    • EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
    • EN 12566-5: Part 5: Pretreated Effluent Filtration systems
    • EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent
    • EN 12566-7: Part 7: Prefabricated tertiary treatment units
  • EN 12572: Artificial climbing structures
  • EN 12600: Classification of Resistance of Glazing to Impact
  • EN 12663: Railway applications - Structural requirements of railway vehicle bodies
    • Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
    • Part 2: Freight wagons
  • EN 12797: Brazing – Destructive tests of brazed joints
  • EN 12799: Brazing – Non-destructive examination brazed joints
  • EN 12810: Facade scaffolds made of prefabricated parts
  • EN 12811: Temporary works equipment
  • EN 12841: Personal fall protection equipment. Rope access systems. Rope adjustment devices
  • BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019 [5]
  • EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
  • EN 12952: Water-Tube Boilers and Auxiliary Installations
  • EN 12973: Value Management
  • EN 12975-1: Thermal solar systems and components - Solar collectors
  • EN 13000: Cranes - Mobile Cranes
  • EN 13103: Railway applications — Wheelsets and bogies — Non-powered axles — Design method
  • EN 13104: Railway applications — Wheelsets and bogies — Powered axles — Design method
  • EN 13133: "Brazing - Brazer approval" (2000)
  • EN 13145: Railway applications - Track - Wood sleepers and bearers
  • EN 13146: Railway applications - Track - Test methods for fastening systems
    • EN 13146-1: Part 1: Determination of longitudinal rail restraint
    • EN 13146-2: Part 2: Determination of torsional resistance
    • EN 13146-3: Part 3: Determination of attenuation of impact loads
    • EN 13146-4: Part 4: Effect of repeated loading
    • EN 13146-5: Part 5: Determination of electrical resistance
    • EN 13146-6: Part 6: Effect of severe environmental conditions
    • EN 13146-7: Part 7: Determination of clamping force
    • EN 13146-8: Part 8: In service testing
    • EN 13146-9: Part 9: Determination of stiffness
  • EN 13162:2013-03: Thermal insulation products for buildings - Factory made mineral wool (MW) products
  • EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements[6]
  • EN 13231: Railway applications - Track - Acceptance of works
    • EN 13231-1: Part 1: Works on ballasted track - Plain line, switches and crossings
    • EN 13231-2: Part 2: Acceptance of reprofiling rails in plain line, switches, crossings, and expansion devices
    • EN 13231-3: withdrawn, replaced by EN 13231-2
    • EN 13231-4: withdrawn, replaced by EN 13231-2
    • EN 13231-5: Part 5: Procedures for rail reprofiling in plain line, switches, crossings, and expansion devices
  • EN 13260: Railway applications — Wheelsets and bogies — Wheelsets — Product requirements
  • EN 13261: Railway applications — Wheelsets and bogies — Axles — Product requirements
  • EN 13262: Railway applications — Wheelsets and bogies — Wheels — Product requirements
  • EN 13300: quality and classification of (interior) wall paint
  • EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply
  • EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
  • EN 13402: Size designation of clothes
  • EN 13432: Compostable and biodegradable packaging
  • EN 13445: Unfired pressure vessels
  • EN 13480: Metallic industrial piping
  • EN 13501: Fire classification of construction products and building elements
  • EN 13537: Temperature ratings for sleeping bags
  • EN 13594:2002: Protective gloves for professional motorcycle riders. Requirements and test methods
  • EN 13595-1:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
  • EN 13595-2:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance
  • EN 13595-3:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength.
  • EN 13595-4:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance
  • EN 13612: Performance evaluation of in-vitro diagnostic devices
  • EN 13634: Protective footwear for professional motorcycle riders. Requirements and test methods
  • EN 13640: Stability testing of in vitro diagnostic reagents
    • EN 13749 Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames
  • EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
  • EN 13803: Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider
  • EN 13940:2016: System of concepts to support continuity of care
  • EN 13979: Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure
    • Part 1: Forged and rolled wheels
  • EN ISO 13982: Protective clothing for use against solid particulates
    • Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
  • EN 14033: Railway applications — Track — Railbound construction and maintenance machines
    • Part 1: Technical requirements for running
    • Part 2: Technical requirements for travelling and working
    • Part 3: General safety requirements
  • EN 14067: Railway applications — Aerodynamics
    • Part 1: Symbols and units
    • Part 3: Aerodynamics in tunnels
    • Part 4: Requirements and test procedures for aerodynamics on open track
    • Part 5: Requirements and test procedures for aerodynamics in tunnels
    • Part 6: Requirements and test procedures for cross wind assessment
  • EN 14081: Timber structures - Strength graded structural timber with rectangular cross section
    • Part 1: General requirements
    • Part 2: Machine grading - additional requirements for initial type testing.
    • Part 3: Machine grading - additional requirements for factory production control.
    • Part 4: Machine grading - grading machine settings for machine controlled systems.
  • EN 14214: The pure biodiesel standard
  • EN 14225-1: Diving suits. Wet suits. Requirements and test methods.
  • EN 14225-2: Diving suits. Dry suits. Requirements and test methods.
  • EN 14363: Railway applications — Testing and Simulation for the acceptance of running characteristics of railway vehicles — Running Behaviour and stationary tests
  • EN 14450:2018 Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
  • EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
  • EN 14531: Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking
    • Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
    • Part 2: Step by step calculations for train sets or single vehicles
  • EN 14535: Railway applications — Brake discs for railway rolling stock
    • Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
    • Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
  • EN 14601: Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe
  • EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
  • EN 14988: Children's High chairs
    • Part 1: Safety requirements
    • Part 2: Test methods
  • EN 15152: Railway applications — Front windscreens for train cabs
  • EN 15153: Railway applications — External visible and audible warning devices
    • Part 1: Head, marker and tail lamps
    • Part 2: Warning horns
  • EN 15179: Railway applications — Braking — Requirements for the brake system of coaches
  • EN 15220: Railway applications — Brake indicators
  • EN 15227: Railway applications — Crashworthiness requirements for railway vehicle bodies
  • EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics
  • EN 15273: Railway applications - Gauges
    • Part 1: General - Common rules for infrastructure and rolling stock
    • Part 2: Rolling stock gauge
    • Part 3: Structure gauges
  • EN 15313: Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance
  • EN 15329: Railway applications — Braking — Brake block holder and brake shoe key for railway vehicles
  • EN 15355: Railway applications — Braking — Distributor valves and distributor-isolating devices
  • EN 15427 Railway applications - Wheel/Rail friction management
    • Part 1-1: Equipment and Application – Flange lubrication
    • Part 1-2: Equipment and Application – Top of Rail materials
    • Part 1-3: Equipment and Application – Adhesion materials
    • Part 2-1: Properties and Characteristics – Flange lubricants
    • Part 2-2: Properties and Characteristics – Top of Rail materials
    • Part 2-3: Properties and Characteristics – Adhesion materials
  • EN 15437: Railway applications — Axlebox condition monitoring — Interface and design requirements
    • Part 1: Track side equipment and rolling stock axlebox
  • EN 15528: Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure
  • EN 15531: Service Interface for Real Time Information
  • EN 15551: Railway applications — Railway rolling stock — Buffers
  • EN 15566: Railway applications — Railway rolling stock — Draw gear and screw coupling
  • EN 15595: Railway applications - Braking - Wheel slide protection
  • EN 15610: Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
  • EN 15611: Railway applications — Braking — Relay valves
  • EN 15612: Railway applications — Braking — Brake pipe accelerator valve
  • EN 15624: Railway applications — Braking — Empty-loaded changeover devices
  • EN 15625: Railway applications — Braking — Automatic variable load sensing devices
  • EN 15663: Railway applications — Definition of vehicle reference masses
  • EN 15714: Industrial Valves - Actuators
  • EN 15744: Film identification — Minimum set of metadata for cinematographic works
  • EN 15806: Railway applications — Braking — Static brake testing
  • EN 15807: Railway applications — Pneumatic half couplings
  • EN 15827: Railway applications — Requirements for bogies and running gears
  • EN 15838: Customer Contact Centres - Requirements for service provision
  • EN 15839: Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces
  • EN 15877: Railway applications — Marking on railway vehicles
    • Part 1: Freight wagons
    • Part 2: External markings on coaches, motive power units, locomotives and on track machines
  • EN 15883: Washer-disinfectors
  • EN 15907: Film identification — Enhancing interoperability of metadata - Element sets and structures
  • EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
  • EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
  • EN 16114: Management consultancy services
  • EN 16207: Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
  • EN 16228: Drilling and foundation equipment – Safety
  • EN 16247: Energy audits
  • EN 16404: Railway applications — Re-railing and recovery requirements for railway vehicles
  • EN 16725: Railway applications - Track - Restoration and repair of manganese crossings
  • EN 16729: Railway applications – Infrastructure – Non-destructive testing on rails in track
    • EN 16729-1: Part 1: Requirements for ultrasonic inspection and evaluation principles
    • EN 16729-2: Part 2: Eddy current testing of rails in track
    • EN 16729-3: Part 3: Requirements for identifying internal and surface rail defects
    • EN 16729-4: Part 4: Qualification of personnel for non-destructive testing on rails
  • EN 16804: Diving equipment - Diving open heel fins - Requirements and test methods
  • EN 16805: Diving equipment - Diving mask - Requirements and test methods
  • EN 16931-1: Electronic Invoicing - Semantic data model of the core elements of an electronic invoice
  • EN 17161: Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users
  • EN 17397: Railway applications - Rail defects
    • EN 17397-1: Part 1: Rail defect management

EN 20000–49999Edit

  • EN 20345: Personal Protective Equipment – Safety Footwear
  • EN 28601: Data elements and interchange formats; information interchange; representation of dates and times
  • EN 45011: General requirements for bodies operating product certification systems, replaced in 2012 by ISO/IEC 17065 Conformity assessment: Requirements for bodies certifying products, processes and services.[7]
  • EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
  • EN 45545: Railway applications. Fire protection on railway vehicles.
    • EN 45545-1: Railway applications. Fire protection on railway vehicles. General
    • EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
    • EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
    • EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
    • EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
    • EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
    • EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
  • EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

EN 50000–59999 (CEN specific, non-IEC electrical standards)Edit

  • EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
  • EN 50075: Europlug
  • EN 50090: Home and Building Electronic Systems (KNX/EIB)
  • EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
  • EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
  • EN 50121: Railway applications - Electromagnetic compatibility
    • EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
    • EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
    • EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
    • EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
    • EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
    • EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
  • EN 50122: Railway applications - Fixed installations
    • EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
    • EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
    • EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
  • EN 50123: Railway applications - Fixed installations - D.C. switchgear
  • EN 50124: Railway applications - Insulation coordination
  • EN 50125-1: Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
  • EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
  • EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
  • EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
  • EN 50128: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
  • EN 50129: Railway applications - Communication, signalling and processing systems – Safety related electronic systems for signalling
  • EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
  • EN 50131: Alarm systems - Intrusion and hold-up systems
  • EN 50136: Alarm systems - Alarm transmission systems
  • EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
  • EN 50155: Railway applications - Electronic equipment used on rolling stock
  • EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
  • EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
  • EN 50163: Railway applications - Supply voltages of traction systems
  • EN 50178: Electronic equipment for use in power installations
  • EN 50262: Metric cable glands
  • EN 50267: Corrosive Gases
  • EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
  • EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
  • EN 50522: Earthing of power installations exceeding 1 kV a.c.
  • EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
  • EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
  • EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz
  • EN 50436: Alcohol interlocks
  • EN 50465: Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
  • EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.
  • EN 50571: Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
  • EN 50581: documentation for the assessment of electrical and electronic products with respect to the RoHS
  • EN 50600: Information technology - Data centre facilities and infrastructures
  • EN 50657: Railways Applications - Rolling stock applications - Software on Board Rolling Stock
  • EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus
  • EN 55022: Information technology equipment. Radio disturbance characteristics.
  • EN 55024: Information technology equipment. Immunity characteristics
  • EN 55032: Electromagnetic Compatibility of Multimedia Equipment. Emission requirements.
  • EN 55035: Electromagnetic Compatibility of Multimedia Equipment. Immunity requirements.

EN 60000-69999 (CEN editions of IEC standards)Edit

  • EN 60065: Audio, Video and similar electronics apparatus - Safety requirements.
  • EN 60950-1: Information technology equipment - Safety - Part1: General requirements
  • EN 60950-21: Information technology equipment - Safety - Part21: Remote power feeding
  • EN 60950-22: Information technology equipment - Safety - Part22: Equipment installed outdoors
  • EN 60950-23: Information technology equipment - Safety - Part23: Large data storage equipment
  • EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
  • EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems
  • EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
  • EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
  • EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
  • EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
  • EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
  • EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
  • EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
  • EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
  • EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
  • EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
  • EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
  • EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
  • EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
  • EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
  • EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
  • EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
  • EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
  • EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
  • EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
  • EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
  • EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
  • EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
  • EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
  • EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
  • EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
  • EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
  • EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
  • EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
  • EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports
  • EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
  • EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
  • EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
  • EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
  • EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
  • EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
  • EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
  • EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
  • EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
  • EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods
  • EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
  • IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication
  • EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
  • EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
  • EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
  • EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
  • EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
  • EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
  • EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
  • EN 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
  • EN 62366 Medical devices - Application of usability engineering to medical devices

Moreover, there are a lot of ISO and IEC standards that were accepted as "European Standard" (headlined as EN ISO xxxxx) and are valid in the European Economic Region.

See alsoEdit

ReferencesEdit

  1. ^ Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.
  2. ^ Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.
  3. ^ BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020
  4. ^ Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6
  5. ^ BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020
  6. ^ "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.
  7. ^ Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022

External linksEdit