List of ASTM International standards

This is a list of ASTM International standards. Standard designations usually consist of a letter prefix and a sequentially assigned number. This may optionally be followed by a dash and the last two digits of the year in which the standard was adopted. Prefix letters correspond to the following subjects:

  • A = Iron and Steel Materials
  • B = Nonferrous Metal Materials
  • C = Ceramic, Concrete, and Masonry Materials
  • D = Miscellaneous Materials
  • E = Miscellaneous Subjects
  • F = Materials for Specific Applications
  • G = Corrosion, Deterioration, and Degradation of Materials

This list may include either current or withdrawn standards. A withdrawn standard has been discontinued by its sponsoring committee. A standard may be withdrawn with or without replacement.

AEdit

A1-A999Edit

  • A1 - 00(2018) Specification for Carbon Steel Tee Rails
  • A2 - 02(2020) Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
  • A3 - 01(2019) Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
  • A6/A6M - 19 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
  • A6/A6M-RU-RU - 19 Стандартные технические условия на прутки, плиты, профили и шпунтовые сваи из катаной конструкционной стали, общие требования
  • A20/A20M - 20 Specification for General Requirements for Steel Plates for Pressure Vessels
  • A27/A27M - 20 Specification for Steel Castings, Carbon, for General Application
  • A29/A29M - 20 Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
  • A31 - 14(2020) Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
  • A34/A34M - 06(2018) Practice for Sampling and Procurement Testing of Magnetic Materials
  • A36/A36M - 19 Specification for Carbon Structural Steel
  • A36/A36M-SP - 19 Especificación de estándar para acero estructural al carbono
  • A36/A36M-RU-RU - 19 Стандартные технические условия на углеродистую конструкционную сталь
  • A36/A36M-POR - 19 Especificação padrão para Aço carbono estrutural
  • A47/A47M - 99(2018)e1 Specification for Ferritic Malleable Iron Castings
  • A48/A48M - 03(2016) Specification for Gray Iron Castings
  • A49 - 12(2019) Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
  • A53/A53M - 20 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  • A53/A53M-SP - 20 Especificación de estándar para tubo de acero, negro e inmerso en caliente, zincado, soldado y sin costuras
  • A53/A53M-POR - 20 Especificação padrão para Tubo de aço, preto e imersão a quente, revestido de zinco, soldado e sem emenda
  • A65 - 07(2013) Specification for Steel Track Spikes
  • A66 - 07(2013) Specification for Steel Screw Spikes
  • A67 - 00(2016) Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
  • A74 - 20 Specification for Cast Iron Soil Pipe and Fittings
  • A90/A90M - 13(2018) Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • A90/A90M-RUS - 13(2018) Стандартный метод определения веса [массы] покрытия на железных и стальных изделиях, покрытых цинком или цинковым сплавом1
  • A99 - 03(2019) Specification for Ferromanganese
  • A100 - 07(2018) Specification for Ferrosilicon
  • A101 - 04(2019) Specification for Ferrochromium
  • A102 - 04(2019) Specification for Ferrovanadium
  • A105/A105M - 21 Specification for Carbon Steel Forgings for Piping Applications
  • A106/A106M - 19a Specification for Seamless Carbon Steel Pipe for High-Temperature Service
  • A108 - 18 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
  • A109/A109M - 16(2018) Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
  • A111 - 99a(2020) Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
  • A116 - 11(2016) Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
  • A121 - 19 Specification for Metallic-Coated Carbon Steel Barbed Wire
  • A123/A123M - 17 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
  • A125 - 96(2018) Specification for Steel Springs, Helical, Heat-Treated
  • A126 - 04(2019) Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
  • A128/A128M - 19 Specification for Steel Castings, Austenitic Manganese
  • A131/A131M - 19 Specification for Structural Steel for Ships
  • A131/A131M-RU-RU - 19 Технические условия на конструкционную сталь для судов
  • A132 - 04(2019) Specification for Ferromolybdenum
  • A134/A134M - 19 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
  • A135/A135M - 20 Specification for Electric-Resistance-Welded Steel Pipe
  • A139/A139M - 16 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
  • A143/A143M - 07(2020) Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
  • A144 - 04(2019) Specification for Ferrotungsten
  • A146 - 04(2019) Specification for Molybdenum Oxide Products
  • A148/A148M - 20e1 Specification for Steel Castings, High Strength, for Structural Purposes
  • A153/A153M - 16a Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
  • A159 - 83(2020) Specification for Automotive Gray Iron Castings
  • A178/A178M - 19 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
  • A179/A179M - 19 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
  • A179/A179M-RUS - 19 Стандартная спецификация на бесшовные трубы из холоднотянутой низкоуглеродистой стали, предназначенных для трубчатых теплообменников и конденсаторов
  • A181/A181M - 14(2020) Specification for Carbon Steel Forgings, for General-Purpose Piping
  • A182/A182M - 20 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
  • A183 - 14(2020) Specification for Carbon Steel Track Bolts and Nuts
  • A184/A184M - 19 Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
  • A184/A184M-SP - 19 Especificación de estándar para mallas de barras de acero corrugadas soldadas para refuerzo del hormigón
  • A184/A184M-POR - 19 Especificação padrão para Malhas de aço soldadas para reforço de concreto
  • A192/A192M - 17 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
  • A193/A193M - 20 Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
(Grade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry.)
  • A194/A194M - 20a Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
  • A197/A197M - 00(2019) Specification for Cupola Malleable Iron
  • A203/A203M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Nickel
  • A204/A204M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
  • A209/A209M - 03(2017) Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
  • A210/A210M - 19 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
  • A210/A210M-RU-RU - 19 Стандартные технические условия на бесшовные трубы из среднеуглеродистой стали для котлов и пароперегревателей
  • A213/A213M - 19a Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
  • A213/A213M-RU-RU - 19a Стандартные технические условия на бесшовные трубы из ферритной и аустенитной легированной стали для котлов, пароперегревателей и теплообменников
  • A214/A214M - 19 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
  • A216/A216M - 18 Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
  • A216/A216M-RU-RU - 18 Стандартные технические условия на отливки из углеродистой стали, подходящие для сварки плавлением, для эксплуатации в условиях высоких температур
  • A217/A217M - 20 Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
  • A220/A220M - 99(2018)e1 Specification for Pearlitic Malleable Iron
  • A225/A225M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
  • A227/A227M - 17 Specification for Steel Wire, Cold-Drawn for Mechanical Springs
  • A228/A228M - 18 Specification for Steel Wire, Music Spring Quality
  • A229/A229M - 18 Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
  • A230/A230M - 19 Specification for Steel Wire, Carbon Valve Spring Quality
  • A231/A231M - 18 Specification for Chromium-Vanadium Alloy Steel Spring Wire
  • A232/A232M - 18 Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
  • A234/A234M - 19 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
  • A239 - 14(2019) Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
  • A240/A240M - 20a Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
  • A242/A242M - 13(2018) Specification for High-Strength Low-Alloy Structural Steel
  • A242/A242M-SP - 13(2018) Especificación estándar para acero estructural de baja aleación de alta resistencia
  • A242/A242M-POR - 13(2018) Especificação padrão para Aço estrutural de alta resistência e baixa liga
  • A242/A242M-RU-RU - 13(2018) Стандартные технические условия на высокопрочную низколегированную конструкционную сталь
  • A247 - 19 Test Method for Evaluating the Microstructure of Graphite in Iron Castings
  • A249/A249M - 18a Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
  • A252/A252M - 19 Specification for Welded and Seamless Steel Pipe Piles
  • A252/A252M-RU-RU - 19 Стандартные технические условия на сварные и бесшовные трубчатые сваи из нержавеющей стали
  • A254/A254M - 12(2019) Specification for Copper-Brazed Steel Tubing
  • A255 - 20a Test Methods for Determining Hardenability of Steel
(Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).[1])
  • A262 - 15 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
  • A262-RUS - 15 Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей
  • A263 - 12(2019) Specification for Stainless Chromium Steel-Clad Plate
  • A264 - 12(2019) Specification for Stainless Chromium-Nickel Steel-Clad Plate
  • A264-RU-RU - 12(2019) Стандартные технические условия на плиты, плакированные нержавеющей хромоникелевой сталью
  • A265 - 12(2019) Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
  • A265-RU-RU - 12(2019) Стандартные технические условия на стальные плиты, плакированные никелем и сплавом на основе никеля
  • A266/A266M - 20 Specification for Carbon Steel Forgings for Pressure Vessel Components
  • A268/A268M - 20 Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
  • A269/A269M - 15a(2019) Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
  • A270/A270M - 15(2019) Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
  • A275/A275M - 18 Practice for Magnetic Particle Examination of Steel Forgings
  • A276/A276M - 17 Specification for Stainless Steel Bars and Shapes
  • A276/A276M-RUS - 17 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НЕРЖАВЕЮЩИХ СОРТОВЫХ И ПРОФИЛЬНЫХ СТАЛЕЙ
  • A278/A278M - 01(2020) Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)
  • A283/A283M - 18 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • A283/A283M-RU-RU - 18 Стандартные технические условия на плиты из углеродистой стали с низким и средним пределом прочности при растяжении
  • A285/A285M - 17 Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • A285/A285M-RU-RU - 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение
  • A288 - 18 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
  • A289/A289M - 97(2018) Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
  • A290/A290M - 16 Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
  • A291/A291M - 19 Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
  • A295/A295M - 14(2020) Specification for High-Carbon Anti-Friction Bearing Steel
  • A297/A297M - 20 Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
  • A299/A299M - 17 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
  • A302/A302M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
  • A304 - 20 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
  • A307 - 14e1 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
  • A307-SP - 14e1 Especificación estándar para pernos, espárragos y varilla roscada de acero al carbono de 60 000 PSI de resistencia a la tracción
  • A311/A311M - 04(2020) Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
  • A312/A312M - 19 Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  • A312/A312M-RU-RU - 19 Стандартные технические условия на бесшовные, сварные и подвергнутые интенсивной холодной деформации трубы из аустенитной нержавеющей стали
  • A313/A313M - 18 Specification for Stainless Steel Spring Wire
  • A314 - 19 Specification for Stainless Steel Billets and Bars for Forging
  • A319 - 71(2020) Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts
  • A320/A320M - 18 Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
  • A320/A320M-RU-RU - 18 Стандартные технические условия на крепежные изделия из легированной и нержавеющей стали для эксплуатации при низких температурах
  • A322 - 13(2018)e1 Specification for Steel Bars, Alloy, Standard Grades
  • A323 - 05(2020) Specification for Ferroboron
  • A324 - 08(2019) Specification for Ferrotitanium
  • A327/A327M - 11(2017) Test Methods for Impact Testing of Cast Irons
  • A328/A328M - 13a(2018) Specification for Steel Sheet Piling
  • A333/A333M - 18 Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
  • A333/A333M-RU-RU - 18 Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур и для других видов применения с требуемой ударной вязкостью
  • A334/A334M - 04a(2016) Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
  • A334/A334M-RU-RU - 04a(2016) Стандартные технические условия на бесшовные и сварные трубы из углеродистой и легированной стали для эксплуатации при низких температурах
  • A335/A335M - 19a Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
  • A335/A335M-RU-RU - 19a Стандартные технические условия на бесшовные трубы из ферритной легированной стали для эксплуатации в условиях высоких температур
  • A336/A336M - 19 Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
  • A338 - 84(2018) Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
  • A340 - 20 Terminology of Symbols and Definitions Relating to Magnetic Testing
  • A341/A341M - 16 Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
  • A342/A342M - 14 Test Methods for Permeability of Weakly Magnetic Materials
  • A343/A343M - 14(2019) Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
  • A345 - 19 Specification for Flat-Rolled Electrical Steels for Magnetic Applications
  • A348/A348M - 05(2015) Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
  • A350/A350M - 18 Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
  • A350/A350M-RU-RU - 18 Стандартные технические условия на поковки из углеродистой и низколегированной стали, требующие проведения испытания на ударную вязкость образца с надрезом для компонентов трубопроводов
  • A351/A351M - 18e1 Specification for Castings, Austenitic, for Pressure-Containing Parts
  • A352/A352M - 18a Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
  • A352/A352M-RU-RU - 18a Стандартные технические условия на стальные отливки, ферритные и мартенситные, для находящихся под давлением деталей, подходящих для эксплуатации в условиях пониженных температур
  • A353/A353M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
  • A354 - 17e2 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
  • A355 - 89(2017) Specification for Steel Bars, Alloys, for Nitriding
  • A356/A356M - 16 Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
  • A358/A358M - 19 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • A363 - 03(2020)e1 Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
  • A367 - 11(2017) Test Methods of Chill Testing of Cast Iron
  • A368 - 95a(2019) Specification for Stainless Steel Wire Strand
  • A369/A369M - 18a Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
  • A370 - 20 Test Methods and Definitions for Mechanical Testing of Steel Products
  • A370-SP - 20 Métodos de prueba estándar y definiciones para pruebas mecánicas de productos de acero
  • A372/A372M - 20e1 Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
  • A376/A376M - 19 Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
  • A377 - 18 Index of Specifications for Ductile Iron Pressure Pipe
  • A380/A380M - 17 Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
  • A380/A380M-RU-RU - 17 Стандартное практическое руководство по очистке, удалению окалины и пассивированию деталей, оборудования и систем из нержавеющей стали
  • A381/A381M - 18 Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
  • A384/A384M - 07(2019) Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
  • A385/A385M - 20 Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • A387/A387M - 17a Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
  • A388/A388M - 19 Practice for Ultrasonic Examination of Steel Forgings
  • A388/A388M-RU-RU - 19 Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок
  • A389/A389M - 13(2018) Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
  • A390 - 06(2016) Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
  • A391/A391M - 07(2012) Specification for Grade 80 Alloy Steel Chain
  • A392 - 11a(2017) Specification for Zinc-Coated Steel Chain-Link Fence Fabric
  • A394 - 08(2015) Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
  • A395/A395M - 99(2018) Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
  • A400 - 17 Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
  • A401/A401M - 18 Specification for Steel Wire, Chromium-Silicon Alloy
  • A403/A403M - 20 Specification for Wrought Austenitic Stainless Steel Piping Fittings
  • A407 - 18 Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
  • A409/A409M - 19 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
  • A411 - 08(2017) Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
  • A413/A413M - 07(2012) Specification for Carbon Steel Chain
  • A414/A414M - 14(2019) Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
  • A416/A416M - 18 Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
  • A416/A416M-SP - 18 Especificación de estándar para torón de acero de siete alambres, de baja relajación, para hormigón pretensado
  • A416/A416M-POR - 18 Especificação padrão para Cordoalha de aço de sete fios de baixa relaxação para concreto protendido
  • A418/A418M - 15(2020) Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
  • A420/A420M - 20 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
  • A421/A421M - 15 Specification for Stress-Relieved Steel Wire for Prestressed Concrete
  • A421/A421M-SP - 15 Especificación Normalizada para Alambre de Acero Aliviado Esfuerzos sin Recubrimiento para Concreto Preesforzado
  • A421/A421M-POR - 15 Especificação padrão para Fio de aço com alívio de tensão para concreto protendido
  • A423/A423M - 19 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
  • A424/A424M - 18 Specification for Steel, Sheet, for Porcelain Enameling
  • A426/A426M - 18 Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
  • A428/A428M - 10(2019) Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
  • A434/A434M - 18 Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
  • A435/A435M - 17 Specification for Straight-Beam Ultrasonic Examination of Steel Plates
  • A435/A435M-RU-RU - 17 Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя
  • A436 - 84(2020) Specification for Austenitic Gray Iron Castings
  • A437/A437M - 15 Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
  • A439/A439M - 18 Specification for Austenitic Ductile Iron Castings
  • A447/A447M - 11(2016) Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
  • A449 - 14(2020) Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
  • A450/A450M - 18a Specification for General Requirements for Carbon and Low Alloy Steel Tubes
  • A451/A451M - 20 Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
  • A453/A453M - 17 Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
  • A453/A453M-RU-RU - 17 Стандартные технические условия на болтовое соединение для условий эксплуатации при высоких температурах из материалов с коэффициентами расширения, подобным коэффициенту расширения аустенитной нержавеющей стали
  • A455/A455M - 12a(2017) Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
  • A456/A456M - 08(2018) Specification for Magnetic Particle Examination of Large Crankshaft Forgings
  • A459 - 08(2020) Specification for Zinc-Coated Flat Steel Armoring Tape
  • A460 - 11(2016) Specification for Copper-Clad Steel Wire Strand
  • A463/A463M - 15(2020)e1 Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
  • A466/A466M - 07(2020) Specification for Weldless Chain
  • A467/A467M - 20 Specification for Machine and Coil Chain
  • A469/A469M - 07(2017) Specification for Vacuum-Treated Steel Forgings for Generator Rotors
  • A470/A470M - 05(2020) Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
  • A471/A471M - 19 Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
  • A472/A472M - 07(2017) Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
  • A473 - 19 Specification for Stainless Steel Forgings
  • A474 - 03(2017) Specification for Aluminum-Coated Steel Wire Strand
  • A475 - 03(2020) Specification for Zinc-Coated Steel Wire Strand
  • A476/A476M - 00(2018) Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
  • A478 - 97(2019) Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
  • A479/A479M - 20 Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
  • A480/A480M - 20a Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • A481 - 05(2020) Specification for Chromium Metal
  • A482/A482M - 11(2016) Specification for Ferrochrome-Silicon
  • A483/A483M - 10(2020) Specification for Silicomanganese
  • A484/A484M - 20b Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
  • A485 - 17 Specification for High Hardenability Antifriction Bearing Steel
  • A487/A487M - 20 Specification for Steel Castings Suitable for Pressure Service
  • A488/A488M - 18e2 Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
  • A489 - 18e1 Specification for Carbon Steel Eyebolts
  • A491 - 11(2017) Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
  • A492 - 95(2019) Specification for Stainless Steel Rope Wire
  • A493 - 16 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
  • A494/A494M - 18a Specification for Castings, Nickel and Nickel Alloy
  • A495 - 06(2020) Specification for Calcium-Silicon Alloys
  • A498/A498M - 17 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
  • A499 - 15(2020) Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
  • A500/A500M - 21 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
  • A501/A501M - 14 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
  • A501/A501M-SP - 14 Especificación de estándar para tubos estructurales de acero al carbono sin costura y soldados conformados en caliente
  • A501/A501M-POR - 14 Especificação padrão para Tubos estruturais de aço carbono soldados e sem emendas, moldados a quente
  • A502 - 03(2015) Specification for Rivets, Steel, Structural
  • A503/A503M - 15(2020) Specification for Ultrasonic Examination of Forged Crankshafts
  • A504/A504M - 18 Specification for Wrought Carbon Steel Wheels
  • A505 - 16 Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
  • A506 - 16 Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • A507 - 16 Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • A508/A508M - 18 Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
  • A510/A510M - 20 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
  • A511/A511M - 20 Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
  • A512 - 18 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
  • A513/A513M - 20a Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
  • A514/A514M - 18e1 Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
  • A515/A515M - 17 Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
  • A516/A516M - 17 Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
  • A516/A516M-RU-RU - 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали для умеренных и низких рабочих температур
  • A517/A517M - 17 Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
  • A517/A517M-RU-RU - 17 Стандартные технические условия на плиты для сосудов под давлением из высокопрочной закаленной и отпущенной легированной стали
  • A518/A518M - 99(2018) Specification for Corrosion-Resistant High-Silicon Iron Castings
  • A519/A519M - 17 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
  • A522/A522M - 14(2019) Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
  • A523/A523M - 20 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
  • A524 - 17 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
  • A529/A529M - 19 Specification for High-Strength Carbon-Manganese Steel of Structural Quality
  • A529/A529M-RU-RU - 19 Стандартные технические условия на высокопрочную марганцевоуглеродистую сталь конструкционного качества
  • A530/A530M - 18 Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
  • A530/A530M-RU-RU - 18 Стандартные технические условия на общие требования к специализированным трубам из углеродистой и легированной стали
  • A531/A531M - 18 Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
  • A532/A532M - 10(2019) Specification for Abrasion-Resistant Cast Irons
  • A533/A533M - 16 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
  • A534 - 17 Specification for Carburizing Steels for Anti-Friction Bearings
  • A536 - 84(2019)e1 Specification for Ductile Iron Castings
  • A537/A537M - 20 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
  • A540/A540M - 15 Specification for Alloy-Steel Bolting for Special Applications
  • A541/A541M - 05(2020) Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
  • A542/A542M - 19 Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
  • A543/A543M - 09(2014) Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
  • A550 - 16 Specification for Ferrocolumbium (Ferroniobium)
  • A551/A551M - 08(2018) Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
  • A553/A553M - 17e1 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
  • A554 - 16 Specification for Welded Stainless Steel Mechanical Tubing
  • A555/A555M - 20 Specification for General Requirements for Stainless Steel Wire and Wire Rods
  • A556/A556M - 18 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
  • A560/A560M - 12(2018) Specification for Castings, Chromium-Nickel Alloy
  • A561 - 08(2020) Practice for Macroetch Testing of Tool Steel Bars
  • A562/A562M - 10(2015) Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
  • A563M - 07(2013) Specification for Carbon and Alloy Steel Nuts (Metric)
  • A563 - 15 Specification for Carbon and Alloy Steel Nuts
  • A563-RU-RU - 15 Стандартные технические условия на гайки из углеродистой и легированной стали
  • A564/A564M - 19a Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
  • A564/A564M-RU-RU - 19a Стандартные технические условия на горячекатаные и упрочненные старением с холодной отделкой прутки и профили из нержавеющей стали
  • A565/A565M - 10(2017)e1 Specification for Martensitic Stainless Steel Bars for High-Temperature Service
  • A568/A568M - 19a Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
  • A571/A571M - 01(2019) Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
  • A572/A572M - 18 Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
  • A572/A572M-SP - 18
  • A572/A572M-POR - 18 Especificação padrão para Aço estrutural de colúmbio-vanádio de alta resistência e baixa liga
  • A572/A572M-RU-RU - 18 Стандартные технические условия на высокопрочную низколегированную ниобий-ванадиевую конструкционную сталь
  • A573/A573M - 20 Specification for Structural Carbon Steel Plates
  • A574 - 17 Specification for Alloy Steel Socket-Head Cap Screws
  • A575 - 20 Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
  • A576 - 17 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
  • A577/A577M - 17 Specification for Ultrasonic Angle-Beam Examination of Steel Plates
  • A577/A577M-RU-RU - 17 Стандартные технические условия на ультразвуковой контроль толстолистовой стали посредством наклонного пучка
  • A578/A578M - 17 Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
  • A578/A578M-RUS - 17 Стандартная спецификация на ультразвуковое исследование узконаправленным пучком толстолистового стального проката специального назначения
  • A579/A579M - 20 Specification for Superstrength Alloy Steel Forgings
  • A580/A580M - 18 Specification for Stainless Steel Wire
  • A581/A581M - 95b(2014) Specification for Free-Machining Stainless Steel Wire and Wire Rods
  • A582/A582M - 12(2017) Specification for Free-Machining Stainless Steel Bars
  • A586 - 18 Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
  • A587 - 96(2019) Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
  • A588/A588M - 19 Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
  • A588/A588M-SP - 19 Especificación de estándar para acero estructural de baja aleación y alta resistencia, de límite de elasticidad mínimo de hasta 50 ksi [345 MPa], con resistencia a la corrosión atmosférica
  • A588/A588M-POR - 19 Especificação padrão para Aço estrutural de baixa resistência e alta resistência, até 50 ksi [345 MPa] de limite de escoamento mínimo, com resistência à corrosão atmosférica
  • A589/A589M - 06(2018) Specification for Seamless and Welded Carbon Steel Water-Well Pipe
  • A592/A592M - 10(2020) Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
  • A595/A595M - 18 Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
  • A596/A596M - 14 Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
  • A597/A597M - 14(2020) Specification for Cast Tool Steel
  • A598/A598M - 02(2015) Test Method for Magnetic Properties of Magnetic Amplifier Cores
  • A599/A599M - 07(2017) Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
  • A600 - 92a(2016) Specification for Tool Steel High Speed
  • A601/A601M - 10(2020) Specification for Electrolytic Manganese Metal
  • A602 - 94(2018) Specification for Automotive Malleable Iron Castings
  • A603 - 19 Specification for Metallic-Coated Steel Structural Wire Rope
  • A604/A604M - 07(2017) Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • A604/A604M-RU-RU - 07(2017) Стандартное практическое руководство по испытаниям макроструктуры травлением стальных прутков и заготовок, полученных переплавом с расходуемым электродом
  • A606/A606M - 18 Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
  • A608/A608M - 20 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • A609/A609M - 12(2018) Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
  • A609/A609M-RU-RU - 12(2018) Стандартное практическое руководство по ультразвуковому исследованию отливок, углеродистой, низколегированной и мартенситной нержавеющей стали
  • A610 - 79(2019) Test Methods for Sampling and Testing Ferroalloys for Determination of Size
  • A612/A612M - 20 Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
  • A615/A615M - 20 Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
  • A615/A615M-SP - 20 Especificación de estándar para barras de acero al carbono lisas y corrugadas para refuerzo del hormigón
  • A615/A615M-POR - 20 Especificação padrão para Barras de aço carbono deformadas e lisas para reforço de concreto
  • A618/A618M - 04(2015) Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
  • A623M - 16 Specification for Tin Mill Products, General Requirements [Metric]
  • A623 - 16 Specification for Tin Mill Products, General Requirements
  • A624/A624M - 13(2018) Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
  • A625/A625M - 13(2018) Specification for Tin Mill Products, Black Plate, Single-Reduced
  • A626/A626M - 16 Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
  • A627 - 03(2019) Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
  • A630 - 16ae1 Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
  • A632 - 19 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
  • A633/A633M - 18 Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
  • A635/A635M - 15 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
  • A635/A635M-RU-RU - 15 Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочнуюнизколегированную с улучшенной формуемостью, общие требования
  • A636 - 08(2018) Specification for Nickel Oxide Sinter
  • A638/A638M - 20 Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
  • A640 - 97(2019) Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
  • A641/A641M - 19 Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
  • A641/A641M-RU-RU - 19 Стандартные технические условия на оцинкованную (гальванизированную) проволоку из углеродистой стали
  • A644 - 17 Terminology Relating to Iron Castings
  • A645/A645M - 10(2016) Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated
  • A646/A646M - 17 Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
  • A648 - 18 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
  • A649/A649M - 10(2020) Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
  • A650/A650M - 18 Specification for Tin Mill Products, Black Plate, Double Reduced
  • A653/A653M - 20 Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • A656/A656M - 18 Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
  • A656/A656M-RU-RU - 18 Стандартные технические условия на плиты из горячекатаной высокопрочной низколегированной конструкционной стали с улучшенной формуемостью
  • A657/A657M - 18 Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
  • A659/A659M - 18 Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
  • A660/A660M - 11(2016) Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
  • A662/A662M - 17 Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
  • A663/A663M - 17 Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
  • A664 - 15 Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
  • A666 - 15 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
  • A667/A667M - 87(2018) Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
  • A668/A668M - 20a Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
  • A671/A671M - 20 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • A672/A672M - 19 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
  • A673/A673M - 17 Specification for Sampling Procedure for Impact Testing of Structural Steel
  • A673/A673M-RUS - 17 Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость
  • A674 - 18 Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
  • A675/A675M - 14(2019) Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
  • A677 - 16 Specification for Nonoriented Electrical Steel Fully Processed Types
  • A679/A679M - 17 Specification for Steel Wire, High Tensile Strength, Cold Drawn
  • A681 - 08(2015) Specification for Tool Steels Alloy
  • A683 - 16 Specification for Nonoriented Electrical Steel, Semiprocessed Types
  • A684/A684M - 17 Specification for Steel, Strip, High-Carbon, Cold-Rolled
  • A686 - 92(2016) Specification for Tool Steel, Carbon
  • A688/A688M - 18 Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
  • A689 - 97(2018) Specification for Carbon and Alloy Steel Bars for Springs
  • A690/A690M - 13a(2018) Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
  • A691/A691M - 19 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
  • A693 - 16 Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • A694/A694M - 16 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
  • A694/A694M-RUS - 16 Стандартная спецификация на поковки из углеродистой и легированной стали для трубных фитингов, фланцев, клапанов и деталей трубопроводов при обслуживании под высоким давлением
  • A696 - 17 Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
  • A696-RUS - 17 Стандартная спецификация на горячекатаные или обработанные в холодном состоянии прутки специального назначения из углеродистой стали для компонентов напорных трубопроводов
  • A697/A697M - 13(2018) Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
  • A698/A698M - 20 Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
  • A700 - 14(2019) Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
  • A701/A701M - 10(2020) Specification for Ferromanganese-Silicon
  • A702 - 13(2018) Specification for Steel Fence Posts, Hot Wrought
  • A703/A703M - 20a Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
  • A704/A704M - 19e1 Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
  • A705/A705M - 20 Specification for Age-Hardening Stainless Steel Forgings
  • A706/A706M - 16 Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
  • A706/A706M-SP - 16 Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
  • A706/A706M-RUS - 16 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА ФАСОННЫЕ И ГЛАДКИЕ АРМАТУРНЫЕ СТЕРЖНИ ИЗ НИЗКОЛЕГИРОВАННОЙ СТАЛИ ДЛЯ ЖЕЛЕЗОБЕТОНА
  • A706/A706M-POR - 16 Especificação padrão para Barras de aço de baixa liga deformadas e lisas para reforço de concreto
  • A707/A707M - 19 Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
  • A709/A709M - 18 Specification for Structural Steel for Bridges
  • A710/A710M - 19 Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
  • A711/A711M - 17 Specification for Steel Forging Stock
  • A712 - 14 Test Method for Electrical Resistivity of Soft Magnetic Alloys
  • A713 - 04(2017) Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
  • A716 - 18 Specification for Ductile Iron Culvert Pipe
  • A717/A717M - 12(2018) Test Method for Surface Insulation Resistivity of Single-Strip Specimens
  • A719/A719M - 14(2019) Test Method for Lamination Factor of Magnetic Materials
  • A720/A720M - 02(2016)e1 Test Method for Ductility of Nonoriented Electrical Steel
  • A721/A721M - 02(2016) Test Method for Ductility of Oriented Electrical Steel
  • A722/A722M - 18 Specification for High-Strength Steel Bars for Prestressed Concrete
  • A722/A722M-SP - 18
  • A722/A722M-POR - 18 Especificação padrão para Barras de aço de alta resistência para concreto protendido
  • A723/A723M - 18a Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
  • A724/A724M - 09(2018) Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
  • A726 - 18 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
  • A727/A727M - 14(2019) Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
  • A729/A729M - 17 Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
  • A732/A732M - 20 Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
  • A733 - 16 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
  • A736/A736M - 17 Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
  • A737/A737M - 17 Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
  • A738/A738M - 19 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
  • A739 - 90a(2016) Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
  • A740 - 98(2014) Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
  • A741 - 11(2016) Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
  • A742/A742M - 20 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
  • A743/A743M - 19 Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
  • A744/A744M - 20a Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
  • A745/A745M - 20 Practice for Ultrasonic Examination of Austenitic Steel Forgings
  • A746 - 18 Specification for Ductile Iron Gravity Sewer Pipe
  • A747/A747M - 18 Specification for Steel Castings, Stainless, Precipitation Hardening
  • A748/A748M - 87(2018) Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
  • A749/A749M - 14 Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
  • A751 - 20 Test Methods and Practices for Chemical Analysis of Steel Products
  • A753 - 08(2013) Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
  • A754/A754M - 18 Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
  • A755/A755M - 18 Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
  • A756 - 17 Specification for Stainless Anti-Friction Bearing Steel
  • A757/A757M - 15 Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
  • A758/A758M - 14(2019) Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
  • A759 - 10(2016) Specification for Carbon Steel Crane Rails
  • A760/A760M - 15(2020) Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
  • A761/A761M - 18 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  • A762/A762M - 19 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
  • A763 - 15 Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
  • A764 - 07(2017) Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
  • A765/A765M - 07(2017) Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
  • A767/A767M - 19 Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
  • A767/A767M-SP - 19 Especificación de estándar para barras de acero zincadas (galvanizadas) para refuerzo del hormigón
  • A767/A767M-POR - 19 Especificação padrão para Barras de aço (galvanizado) revestido de zinco para reforço de concreto
  • A769/A769M - 17 Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
  • A770/A770M - 03(2018) Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
  • A770/A770M-RU-RU - 03(2018) Стандартные технические условия на испытания стальных плит специального назначения на растяжение в направлении толщины
  • A772/A772M - 00(2016) Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
  • A773/A773M - 14 Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
  • A774/A774M - 14(2019) Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
  • A775/A775M - 19 Specification for Epoxy-Coated Steel Reinforcing Bars
  • A775/A775M-SP - 19 Especificación de estándar para barras de acero de refuerzo con recubrimiento de epoxi
  • A775/A775M-POR - 19 Especificação padrão para Vergalhões de aço revestidos com epóxi
  • A778/A778M - 16 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
  • A778/A778M-RU-RU - 16 Стандартные технические условия на сварные неотожженые трубные изделия из аустенитной нержавеющей стали
  • A779/A779M - 16 Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
  • A780/A780M - 20 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
  • A781/A781M - 20a Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
  • A786/A786M - 15 Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
  • A787/A787M - 20a Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
  • A788/A788M - 19a Specification for Steel Forgings, General Requirements
  • A789/A789M - 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
  • A790/A790M - 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
  • A792/A792M - 10(2015) Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
  • A793 - 96(2014) Specification for Rolled Floor Plate, Stainless Steel
  • A794/A794M - 18 Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
  • A795/A795M - 13(2020) Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
  • A796/A796M - 17a Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
  • A798/A798M - 17 Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
  • A799/A799M - 10(2020) Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • A800/A800M - 20 Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
  • A801 - 14 Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
  • A802 - 19 Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
  • A802-RUS - 19 Методика для стальных отливок, стандарты приемки поверхности, визуальный осмотр
  • A803/A803M - 16 Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
  • A804/A804M - 04(2015) Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
  • A805/A805M - 09(2016) Specification for Steel, Flat Wire, Carbon, Cold-Rolled
  • A807/A807M - 19 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
  • A809 - 08(2017) Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
  • A810 - 01(2019) Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
  • A811 - 15 Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
  • A813/A813M - 14(2019) Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
  • A814/A814M - 15(2019) Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
  • A815/A815M - 20 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
  • A817 - 12(2017) Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
  • A818 - 06(2016) Specification for Coppered Carbon Steel Wire
  • A820/A820M - 16 Specification for Steel Fibers for Fiber-Reinforced Concrete
  • A820/A820M-SP - 16 Especificación estándar para fibras de acero para hormigón reforzado con fibra
  • A820/A820M-POR - 16 Especificação padrão para Fibras de aço para concreto reforçado com fibra
  • A821/A821M - 15 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
  • A822/A822M - 20 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
  • A823 - 99(2019) Specification for Statically Cast Permanent Mold Gray Iron Castings
  • A824 - 01(2017) Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
  • A827/A827M - 14(2018) Specification for Plates, Carbon Steel, for Forging and Similar Applications
  • A829/A829M - 17 Specification for Alloy Structural Steel Plates
  • A830/A830M - 18 Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
  • A832/A832M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
  • A833 - 19 Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • A834 - 95(2020) Specification for Common Requirements for Iron Castings for General Industrial Use
  • A835/A835M - 10(2020) Specification for Sizes of Ferroalloys and Alloy Additives
  • A836/A836M - 14(2020) Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
  • A837/A837M - 17 Specification for Steel Forgings, Alloy, for Carburizing Applications
  • A838 - 18 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
  • A839 - 15 Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
  • A841/A841M - 17 Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
  • A842 - 11A(2018)e1 Specification for Compacted Graphite Iron Castings
  • A844/A844M - 09(2015) Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
  • A847/A847M - 20 Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
  • A848 - 17 Specification for Low-Carbon Magnetic Iron
  • A849 - 15 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
  • A853 - 19 Specification for Steel Wire, Carbon, for General Use
  • A854/A854M - 08(2017) Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
  • A855/A855M - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
  • A856/A856M - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
  • A857/A857M - 19 Specification for Steel Sheet Piling, Cold Formed, Light Gage
  • A858/A858M - 19 Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
  • A859/A859M - 04(2019)e1 Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
  • A860/A860M - 18 Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
  • A861 - 04(2017) Specification for High-Silicon Iron Pipe and Fittings
  • A862/A862M - 98(2020) Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
  • A865/A865M - 06(2017) Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
  • A866 - 18 Specification for Medium Carbon Anti-Friction Bearing Steel
  • A867 - 19 Specification for Iron-Silicon Relay Steels
  • A871/A871M - 20 Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
  • A872/A872M - 14 Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
  • A874/A874M - 98(2018)e1 Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
  • A875/A875M - 13 Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
  • A876 - 17e1 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
  • A877/A877M - 17 Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
  • A878/A878M - 19 Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
  • A879/A879M - 12(2017) Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
  • A881/A881M - 16a Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
  • A882/A882M - 20 Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
  • A884/A884M - 19e1 Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
  • A884/A884M-SP - 19e1 Especificación de estándar para refuerzo de alambre y alambre electrosoldado de acero recubiertos con epoxi
  • A884/A884M-POR - 19e1 Especificação padrão para Reforço de fio de aço soldado e fio de aço revestido com zinco
  • A886/A886M - 17 Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
  • A887 - 20 Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
  • A888 - 20 Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
  • A889/A889M - 14(2020) Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
  • A890/A890M - 18a Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • A891/A891M - 16 Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
  • A892 - 09(2020) Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
  • A893/A893M - 03(2015) Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • A895 - 89(2017) Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
  • A896/A896M - 09(2019) Practice for Conducting Case Studies on Galvanized Structures
  • A897/A897M - 16 Specification for Austempered Ductile Iron Castings
  • A898/A898M - 17 Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
  • A899 - 91(2014) Specification for Steel Wire, Epoxy-Coated
  • A900/A900M - 01(2018) Test Method for Lamination Factor of Amorphous Magnetic Strip
  • A901 - 19 Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
  • A902 - 18a Terminology Relating to Metallic Coated Steel Products
  • A903/A903M - 99(2017) Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
  • A904 - 20 Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
  • A905 - 19 Specification for Steel Wire, Pressure Vessel Winding
  • A906/A906M - 02(2016) Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
  • A908 - 03(2019) Specification for Stainless Steel Needle Tubing
  • A909/A909M - 06(2016) Specification for Steel Forgings, Microalloy, for General Industrial Use
  • A910/A910M - 18 Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
  • A911/A911M - 15 Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
  • A912/A912M - 11(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
  • A913/A913M - 19 Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
  • A914/A914M - 19 Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
  • A915/A915M - 08(2018) Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
  • A917 - 08(2020) Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
  • A918 - 06(2019) Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
  • A920/A920M - 14(2019) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
  • A921/A921M - 93(2016) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
  • A922 - 05(2020) Specification for Silicon Metal
  • A923 - 14 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • A923-RU-RU - 14 Стандартные методы испытаний для обнаружения вредной интерметаллической фазы в двухфазных аустенито-ферритных нержавеющих сталях
  • A924/A924M - 20 Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
  • A925 - 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
  • A927/A927M - 18 Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • A928/A928M - 14 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • A928/A928M-RU-RU - 14 Стандартные технические условия на трубы из нержавеющей аустенитно-ферритной (дуплексной) стали, сваренные методом электрической сварки плавлением с добавлением присадочного металла
  • A929/A929M - 18 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
  • A930 - 09(2020) Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
  • A931 - 18 Test Method for Tension Testing of Wire Ropes and Strand
  • A932/A932M - 01(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
  • A934/A934M - 19 Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
  • A934/A934M-SP - 19 Especificación de estándar para barras de acero de refuerzo prefabricadas y con recubrimiento de epoxi
  • A934/A934M-POR - 19 Especificação padrão para Vergalhões de aço pré-fabricados revestidos com epóxi
  • A937/A937M - 12(2019) Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
  • A938 - 18 Test Method for Torsion Testing of Wire
  • A939/A939M - 15(2020) Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
  • A941 - 18 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
  • A942/A942M - 95(2018) Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
  • A943/A943M - 01(2019) Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
  • A944 - 10(2015) Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • A945/A945M - 16 Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
  • A947M - 16 Specification for Textured Stainless Steel Sheet [Metric]
  • A949/A949M - 01(2019) Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
  • A950/A950M - 11(2015) Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
  • A951/A951M - 16e1 Specification for Steel Wire for Masonry Joint Reinforcement
  • A952/A952M - 02(2016) Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
  • A955/A955M - 20c Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
  • A955/A955M-POR - 20c Especificação padrão para Barras de aço inoxidável deformadas e planas para reforço de concreto
  • A956/A956M - 17a Test Method for Leeb Hardness Testing of Steel Products
  • A956/A956M-RU-RU - 17a Стандартный метод испытания для определения твердости по Либу стальных изделий
  • A957/A957M - 20 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
  • A958/A958M - 17 Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
  • A959 - 19 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
  • A960/A960M - 20 Specification for Common Requirements for Wrought Steel Piping Fittings
  • A961/A961M - 20 Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
  • A962/A962M - 19 Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
  • A964/A964M - 17 Specification for Corrugated Steel Box Culverts
  • A965/A965M - 20 Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
  • A966/A966M - 15(2020) Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
  • A967/A967M - 17 Specification for Chemical Passivation Treatments for Stainless Steel Parts
  • A970/A970M - 18 Specification for Headed Steel Bars for Concrete Reinforcement
  • A970/A970M-SP - 18 Especificación estándar para barras de acero con cabeza para refuerzo del hormigón
  • A970/A970M-POR - 18 Especificação padrão para Barras de aço com cabeça para reforço de concreto
  • A970/A970M-RU-RU - 18 Стандартные технические условия на стальные прутки с головкой для армирования бетона
  • A971/A971M - 17 Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
  • A972/A972M - 00(2015) Specification for Fusion Bonded Epoxy-Coated Pipe Piles
  • A973/A973M - 21 Specification for Grade 100 Alloy Steel Chain
  • A974 - 97(2016) Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
  • A975 - 20 Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
  • A976 - 18 Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
  • A977/A977M - 07(2020) Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
  • A979/A979M - 03(2019) Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
  • A980/A980M - 19 Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
  • A981/A981M - 11(2016) Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
  • A981/A981M-RU-RU - 11(2016) Стандартный метод испытания для оценки прочности сцепления стальных, предварительно напрягаемых арматурных прядей диаметром 0,600 дюйма [15,24 мм], Марки 270 [1860], без покрытия, применяемых в предварительно напряженных анкерах, закапываемых в землю
  • A982/A982M - 10(2020) Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • A983/A983M - 06(2016) Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
  • A985/A985M - 20 Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
  • A986/A986M - 01(2016) Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
  • A987/A987M - 19 Practice for Measuring Shape Characteristics of Tin Mill Products
  • A988/A988M - 17 Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  • A988/A988M-RU-RU - 17 Стандартные технические условия на фланцы, фитинги, трубопроводную арматуру и детали из нержавеющей стали, полученные методом горячего изостатического прессования для эксплуатации при высоких температурах
  • A989/A989M - 18 Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  • A990/A990M - 20 Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
  • A991/A991M - 17 Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • A992/A992M - 20 Specification for Structural Steel Shapes
  • A992/A992M-SP - 20 Especificación de estándar para perfiles estructurales de acero
  • A992/A992M-POR - 20 Especificação padrão para Perfis estruturais de aço
  • A994 - 18 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
  • A995/A995M - 20 Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • A996/A996M - 16 Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
  • A996/A996M-SP - 16 Especificación de estándar para barras corrugadas de acero de rieles y ejes de ferrocarril para refuerzo del hormigón
  • A996/A996M-POR - 16 Especificação padrão para Barras deformadas em aço ferroviário e aço de eixo para reforço de concreto
  • A997 - 08(2018) Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
  • A998/A998M - 18 Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
  • A999/A999M - 18 Specification for General Requirements for Alloy and Stainless Steel Pipe
  • A999/A999M-RU-RU - 18 Стандартные технические условия на общие требования к трубам из легированной и нержавеющей стали

A1000-A1999Edit

  • A1000/A1000M - 17 Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
  • A1001 - 18 Specification for High-Strength Steel Castings in Heavy Sections
  • A1002 - 16(2020) Specification for Castings, Nickel-Aluminum Ordered Alloy
  • A1003/A1003M - 15 Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • A1004/A1004M - 99(2018) Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
  • A1007 - 15 Specification for Carbon Steel Wire for Wire Rope
  • A1008/A1008M - 20 Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
  • A1009 - 18 Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
  • A1010/A1010M - 13(2018) Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
  • A1011/A1011M - 18a Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  • A1011/A1011M-RU-RU - 18a Стандартные технические условия на сталь, тонколистовую и полосовую, горячекатаную, углеродистую, конструкционную, высокопрочную низколегированную, высокопрочную низколегированную с улучшенной формуемостьюи сверхвысокопрочную
  • A1012 - 10(2015) Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
  • A1013 - 00(2020) Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
  • A1014/A1014M - 16e1 Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
  • A1015 - 01(2018) Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • A1016/A1016M - 18a Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
  • A1017/A1017M - 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
  • A1018/A1018M - 18 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  • A1021/A1021M - 20 Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
  • A1022/A1022M - 16b Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
  • A1022/A1022M-SP - 16b Especificación estándar para alambres de acero inoxidable corrugados y lisos, y alambre soldado para refuerzo de hormigón
  • A1022/A1022M-POR - 16b Especificação padrão para Fio de aço inoxidável deformado e liso e fio soldado para reforço de concreto
  • A1023/A1023M - 19 Specification for Carbon Steel Wire Ropes for General Purposes
  • A1024/A1024M - 18 Specification for Steel Line Pipe, Black, Plain-End, Seamless
  • A1025/A1025M - 10(2020) Specification for Ferroalloys and Other Alloying Materials, General Requirements
  • A1028 - 03(2015) Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
  • A1030/A1030M - 16 Practice for Measuring Flatness Characteristics of Steel Sheet Products
  • A1031/A1031M - 12(2017) Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
  • A1032 - 15(2019) Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
  • A1033 - 18 Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
  • A1034/A1034M - 10a(2015) Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
  • A1035/A1035M - 20 Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
  • A1036 - 04(2020) Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
  • A1038 - 19 Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
  • A1039/A1039M - 20 Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
  • A1040 - 17 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
  • A1040-RUS - 17 СТАНДАРТНОЕ РУКОВОДСТВО ПО УСТАНОВЛЕНИЮ ГАРМОНИЗИРОВАННЫХ СТАНДАРТНЫХ СОСТАВОВ ДЛЯ МАРОК ДЕФОРМИРУЕМОЙ УГЛЕРОДИСТОЙ, НИЗКОЛЕГИРОВАННОЙ И ЛЕГИРОВАННОЙ СТАЛИ
  • A1043/A1043M - 18 Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
  • A1044/A1044M - 16ae1 Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
  • A1044/A1044M-SP - 16ae1 Especificación de estándar para conjuntos de espárragos de acero de refuerzo para esfuerzo cortante del hormigón
  • A1044/A1044M-POR - 16ae1 Especificação padrão para Conjuntos de montantes de aço para reforço de cisalhamento de concreto
  • A1045 - 10(2017) Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
  • A1046/A1046M - 19 Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
  • A1047/A1047M - 05(2019) Test Method for Pneumatic Leak Testing of Tubing
  • A1049/A1049M - 18 Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • A1053/A1053M - 12(2017) Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
  • A1054 - 16 Specification for Sintered Ferrite Permanent Magnets
  • A1055/A1055M - 16 Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
  • A1055/A1055M-SP - 16 Especificación estándar para conjuntos de espárragos de acero para refuerzo de esfuerzo cortante del hormigónEspecificación estándar para barras de acero de refuerzo con doble recubrimiento de zinc y epoxi
  • A1055/A1055M-POR - 16 Especificação padrão para Vergalhões de aço com revestimento duplo de zinco e epóxi
  • A1056 - 20 Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
  • A1057/A1057M - 08(2019) Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
  • A1058 - 19 Test Methods for Mechanical Testing of Steel Products—Metric
  • A1059/A1059M - 18 Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
  • A1060/A1060M - 16b Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • A1060/A1060M-SP - 16b Especificación estándar para refuerzo de alambre soldado de acero (galvanizado) revestido en zinc, liso y corrugado, para hormigón
  • A1060/A1060M-POR - 16b Especificação padrão para Reforço de fio soldado de aço com revestimento de zinco (galvanizado), liso e deformado, para concreto
  • A1061/A1061M - 20ae1 Test Methods for Testing Multi-Wire Steel Prestressing Strand
  • A1062 - 10(2020) Specification for Steel Castings Sampling
  • A1063/A1063M - 20 Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
  • A1064/A1064M - 18a Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • A1064/A1064M-SP - 18a Especificación estándar para refuerzo de alambre soldado y alambre de acero al carbono, liso y corrugado, para hormigón
  • A1064/A1064M-POR - 18a Especificação padrão para Reforço de fio de aço carbono e fio soldado, liso e deformado, para concreto
  • A1065/A1065M - 18 Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
  • A1066/A1066M - 11(2015)e2 Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
  • A1067/A1067M - 12a(2018) Specification for Test Coupons for Steel Castings
  • A1068 - 10(2020) Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
  • A1069/A1069M - 19 Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
  • A1070 - 16 Specification for Cast and Sintered Alnico Permanent Magnets
  • A1071/A1071M - 11(2015) Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
  • A1072/A1072M - 11(2020) Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
  • A1073/A1073M - 17 Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
  • A1074 - 11(2020) Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
  • A1075 - 12(2017)e1 Specification for Flanged Steel U-Channel Posts
  • A1076/A1076M - 20 Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
  • A1077/A1077M - 14 Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
  • A1078/A1078M - 19 Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
  • A1079 - 17 Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • A1080/A1080M - 19 Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
  • A1081/A1081M - 15 Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
  • A1082/A1082M - 16 Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • A1083/A1083M - 12(2017) Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
  • A1084 - 15a Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • A1085/A1085M - 15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
  • A1085/A1085M-SP - 15 Especificación estándar para secciones estructurales huecas de acero al carbono soldadas conformadas en frío (HSS)
  • A1086 - 20 Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
  • A1087/A1087M - 16 Practice for Using Hand Calipers to Measure the Width of Steel Sheet
  • A1088 - 13(2019) Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
  • A1089/A1089M - 14(2020) Specification for Highly Loaded Anti-Friction Bearing Steel
  • A1090/A1090M - 19 Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
  • A1091/A1091M - 16e1 Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
  • A1092 - 15(2020) Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
  • A1093/A1093M - 15(2020)e1 Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
  • A1094/A1094M - 20 Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
  • A1095 - 15(2019) Specification for High-Silicon Molybdenum Ferritic Iron Castings
  • A1096/A1096M - 15 Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
  • A1097 - 16 Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
  • A1098/A1098M - 18 Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
  • A1099/A1099M - 20 Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
  • A1100 - 16 Guide for Qualification and Control of Induction Heat Treating
  • A1101 - 16 Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
  • A1102 - 19 Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
  • A1103/A1103M - 16 Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
  • A1105 - 17 Specification for Corrugated Steel Manhole Assemblies
  • A1106/A1106M - 17 Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
  • A1107/A1107M - 17 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
  • A1108 - 17 Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
  • A1109 - 18 Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
  • A1110/A1110M - 18 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
  • A1111 - 18 Specification for Cast Iron Closet Flanges for Use With Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
  • A1112/A1112M - 18 Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
  • A1113/A1113M - 20 Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  • A1114/A1114M - 20 Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete
  • A1115/A1115M - 19 Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement
  • A1119 - 20 Specification for Welded Partially Corrugated Tube for Potable Water and General Servic

Withdrawn StandardsEdit

  • A42/A42M - Specification for Wrought Iron Plates (Last edition published 1966, withdrawn 1972)
  • A167 - Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014, no replacement)
  • A325/A325M - Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
  • A490/A490M - Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
  • A570 - Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000, replaced by A1011/A1011M)

BEdit

B1-B999Edit

  • B1 - 13(2018) Specification for Hard-Drawn Copper Wire
  • B2 - 13(2018) Specification for Medium-Hard-Drawn Copper Wire
  • B3 - 13(2018) Specification for Soft or Annealed Copper Wire
  • B3-JPN - 13(2018) 標準仕様軟銅線または焼鈍銅線
  • B5 - 16 Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
  • B6 - 18 Specification for Zinc
  • B8 - 11(2017) Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
  • B9 - 76(2017)e1 Specification for Bronze Trolley Wire
  • B16/B16M - 19 Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  • B19 - 20 Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • B21/B21M - 20 Specification for Naval Brass Rod, Bar, and Shapes
  • B22/B22M - 17 Specification for Bronze Castings for Bridges and Turntables
  • B23 - 20 Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
  • B26/B26M - 18e1 Specification for Aluminum-Alloy Sand Castings
  • B29 - 19 Specification for Refined Lead
  • B29-RU-RU - 19 Стандартные технические условия для очищенного свинца
  • B30 - 20 Specification for Copper Alloys in Ingot and Other Remelt Forms
  • B32 - 20 Specification for Solder Metal
  • B33 - 10(2020)e1 Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
  • B36/B36M - 18 Specification for Brass Plate, Sheet, Strip, And Rolled Bar
  • B37 - 18 Specification for Aluminum for Use in Iron and Steel Manufacture
  • B39 - 79(2018) Specification for Nickel
  • B42 - 20 Specification for Seamless Copper Pipe, Standard Sizes
  • B43 - 20 Specification for Seamless Red Brass Pipe, Standard Sizes
  • B47 - 95a(2017) Specification for Copper Trolley Wire
  • B48 - 00(2016) Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • B49 - 20 Specification for Copper Rod for Electrical Purposes
  • B61 - 15 Specification for Steam or Valve Bronze Castings
  • B62 - 17 Specification for Composition Bronze or Ounce Metal Castings
  • B63 - 07(2018) Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • B66 - 15 Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • B67 - 14 Specification for Car and Tender Journal Bearings, Lined
  • B68/B68M - 19 Specification for Seamless Copper Tube, Bright Annealed
  • B69 - 20 Specification for Rolled Zinc
  • B70 - 90(2019) Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
  • B75/B75M - 20 Specification for Seamless Copper Tube
  • B76 - 90(2018) Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • B77 - 07(2018) Test Method for Thermoelectric Power of Electrical-Resistance Alloys
  • B78 - 90(2019) Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • B80 - 15 Specification for Magnesium-Alloy Sand Castings
  • B84 - 07(2019) Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • B85/B85M - 18e1 Specification for Aluminum-Alloy Die Castings
  • B86 - 18 Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
  • B88M - 20 Specification for Seamless Copper Water Tube (Metric)
  • B88 - 20 Specification for Seamless Copper Water Tube
  • B90/B90M - 15 Specification for Magnesium-Alloy Sheet and Plate
  • B91 - 17 Specification for Magnesium-Alloy Forgings
  • B92/B92M - 17 Specification for Unalloyed Magnesium Ingot and Stick For Remelting
  • B93/B93M - 15 Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
  • B94 - 18 Specification for Magnesium-Alloy Die Castings
  • B96/B96M - 20 Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
  • B98/B98M - 13(2019) Specification for Copper-Silicon Alloy Rod, Bar and Shapes
  • B99/B99M - 15 Specification for Copper-Silicon Alloy Wire for General Applications
  • B99/B99M - 15 Specification for Copper-Silicon Alloy Wire for General Applications
  • B100 - 20 Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
  • B101 - 12(2019) Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • B103/B103M - 19 Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
  • B105 - 05(2020) Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
  • B106 - 08(2019) Test Methods for Flexivity of Thermostat Metals
  • B107/B107M - 13 Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
  • B108/B108M - 19 Specification for Aluminum-Alloy Permanent Mold Castings
  • B111/B111M - 18a Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • B114 - 07(2018) Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • B115 - 10(2016) Specification for Electrolytic Copper Cathode
  • B115-RUS - 10(2016) Стандартная спецификация на катод из электролитической меди
  • B116 - 95(2017) Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
  • B117 - 19 Practice for Operating Salt Spray (Fog) Apparatus
  • B117-RU-RU - 19 Стандартное практическое руководство по эксплуатации оборудования для проведения испытаний с солевым распылением (в солевом тумане)
  • B121/B121M - 16 Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
  • B122/B122M - 20 Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
  • B124/B124M - 20 Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
  • B127 - 19 Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
  • B129 - 17 Specification for Cartridge Brass Cartridge Case Cups
  • B130 - 19 Specification for Commercial Bronze Strip for Bullet Jackets
  • B131 - 17 Specification for Copper Alloy Bullet Jacket Cups
  • B134/B134M - 15 Specification for Brass Wire
  • B135/B135M - 17 Specification for Seamless Brass Tube
  • B136 - 84(2018) Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • B137 - 95(2014) Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  • B138/B138M - 11(2017) Specification for Manganese Bronze Rod, Bar, and Shapes
  • B139/B139M - 12(2017) Specification for Phosphor Bronze Rod, Bar, and Shapes
  • B140/B140M - 12(2017) Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
  • B148 - 18 Specification for Aluminum-Bronze Sand Castings
  • B150/B150M - 19 Specification for Aluminum Bronze Rod, Bar, and Shapes
  • B151/B151M - 20 Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • B152/B152M - 19 Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  • B153 - 11(2017) Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
  • B154 - 16 Test Method for Mercurous Nitrate Test for Copper Alloys
  • B159/B159M - 17 Specification for Phosphor Bronze Wire
  • B160 - 05(2019) Specification for Nickel Rod and Bar
  • B160-RU-RU - 05(2019) Стандартные технические условия на стержни и прутки из никеля
  • B161 - 05(2019) Specification for Nickel Seamless Pipe and Tube
  • B162 - 99(2019) Specification for Nickel Plate, Sheet, and Strip
  • B163 - 19 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
  • B164 - 03(2019) Specification for Nickel-Copper Alloy Rod, Bar, and Wire
  • B165 - 19 Specification for Nickel-Copper Alloy Seamless Pipe and Tube
  • B166 - 19 Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
  • B167 - 18 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
  • B167-RUS - 18 Стандартные технические условия на никель-хром-алюминиевые сплавы (UNS N06699), никель-хром-железные сплавы (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045 и N06696), никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) бесшовных труб и трубок никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) в холоднодеформированных
  • B168 - 19 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
  • B169/B169M - 20 Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
  • B170 - 99(2020) Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
  • B171/B171M - 18 Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
  • B172 - 17 Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • B173 - 17 Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
  • B174 - 17 Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
  • B176 - 18 Specification for Copper-Alloy Die Castings
  • B177/B177M - 11(2017) Guide for Engineering Chromium Electroplating
  • B179 - 18 Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • B183 - 18 Practice for Preparation of Low-Carbon Steel for Electroplating
  • B187/B187M - 20 Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
  • B188 - 15e1 Specification for Seamless Copper Bus Pipe and Tube
  • B189 - 05(2015) Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
  • B193 - 20 Test Method for Resistivity of Electrical Conductor Materials
  • B194 - 15 Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B194-RU-RU - 15 Стандартные технические условия на плиты, листы, штрипсы и катаные прутки из медно-бериллиевого сплава
  • B196/B196M - 18 Specification for Copper-Beryllium Alloy Rod and Bar
  • B196/B196M-RU-RU - 18 Стандартные технические условия на стержни и прутки из меднобериллиевого сплава
  • B197/B197M - 20 Specification for Copper-Beryllium Alloy Wire
  • B199 - 17 Specification for Magnesium-Alloy Permanent Mold Castings
  • B200 - 85(2015) Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • B201 - 80(2019) Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • B206/B206M - 12(2017) Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • B208 - 14 Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
  • B209 - 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • B209M - 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
  • B210/B210M - 19a Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
  • B211/B211M - 19 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
  • B212 - 17 Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
  • B212-RU-RU - 17 Стандартный метод испытания для определения объемной плотности свободнотекучих металлопорошков с использованием прибора Холла
  • B213 - 20 Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
  • B214 - 16 Test Method for Sieve Analysis of Metal Powders
  • B214-RU-RU - 16 Стандартный метод испытания для проведения ситового анализа металлопорошков
  • B215 - 20 Practices for Sampling Metal Powders
  • B216 - 16 Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
  • B221M - 13 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
  • B221 - 20 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  • B223 - 08(2018) Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • B224 - 16 Classification of Coppers
  • B226 - 11(2016) Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
  • B227 - 15(2019) Specification for Hard-Drawn Copper-Clad Steel Wire
  • B228 - 11a(2016) Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
  • B229 - 12(2017) Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
  • B230/B230M - 07(2016) Specification for Aluminum 1350–H19 Wire for Electrical Purposes
  • B231/B231M - 16 Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B232/B232M - 17 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
  • B233 - 97(2016) Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • B234 - 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
  • B234M - 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
  • B236 - 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
  • B236M - 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
  • B237 - 20 Specification for Refined Antimony
  • B240 - 17 Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  • B241/B241M - 16 Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
  • B242 - 99(2020) Guide for Preparation of High-Carbon Steel for Electroplating
  • B243 - 20 Terminology of Powder Metallurgy
  • B244 - 09(2014) Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • B246 - 15 Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
  • B247 - 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
  • B247M - 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
  • B248 - 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
  • B248M - 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
  • B248-RU-RU - 17 Технические условия на общие требования для плит, листов, штрипсов и катаных прутков из меди и медных сплавов, полученных обработкой металла давлением
  • B249/B249M - 20 Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
  • B250/B250M - 19 Specification for General Requirements for Wrought Copper Alloy Wire
  • B251/B251M - 17 Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
  • B252 - 92(2020) Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • B253 - 11(2017) Guide for Preparation of Aluminum Alloys for Electroplating
  • B254 - 92(2020)e1 Practice for Preparation of and Electroplating on Stainless Steel
  • B258 - 18 Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • B263/B263M - 14(2020) Test Method for Determination of Cross-Sectional Area of Stranded Conductors
  • B265 - 20a Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
  • B267 - 07(2018) Specification for Wire for Use In Wire-Wound Resistors
  • B271/B271M - 18 Specification for Copper-Base Alloy Centrifugal Castings
  • B272 - 12(2019) Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  • B276 - 05(2015) Test Method for Apparent Porosity in Cemented Carbides
  • B277 - 18 Test Method for Hardness of Electrical Contact Materials
  • B279 - 13(2019) Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
  • B280 - 20 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
  • B281 - 88(2019)e1 Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • B283/B283M - 20 Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
  • B286 - 20 Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • B294 - 17 Test Method for Hardness Testing of Cemented Carbides
  • B296 - 20 Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
  • B298 - 12(2017) Specification for Silver-Coated Soft or Annealed Copper Wire
  • B299/B299M - 18 Specification for Titanium Sponge
  • B301/B301M - 13(2020) Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
  • B302 - 17 Specification for Threadless Copper Pipe, Standard Sizes
  • B306 - 20 Specification for Copper Drainage Tube (DWV)
  • B308/B308M - 20 Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
  • B311 - 17 Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • B312 - 20 Test Method for Green Strength of Specimens Compacted from Metal Powders
  • B315 - 19 Specification for Seamless Copper Alloy Pipe and Tube
  • B316/B316M - 20 Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  • B317/B317M - 07(2015)e1 Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
  • B319 - 91(2020) Guide for Preparation of Lead and Lead Alloys for Electroplating
  • B320 - 60(2019) Practice for Preparation of Iron Castings for Electroplating
  • B322 - 99(2020)e1 Guide for Cleaning Metals Prior to Electroplating
  • B324 - 01(2016) Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
  • B327 - 16 Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • B329 - 20 Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • B330 - 20 Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
  • B331 - 20 Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • B333 - 03(2018) Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
  • B335 - 03(2018) Specification for Nickel-Molybdenum Alloy Rod
  • B338 - 17e1 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • B338-RU-RU - 17e1 Технические условия на бесшовные и сварные трубы из титана и титановых сплавов, предназначенные для конденсаторов и теплообменников
  • B339 - 19 Specification for Pig Tin
  • B343 - 92a(2020) Practice for Preparation of Nickel for Electroplating with Nickel
  • B344 - 20 Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
  • B348/B348M - 19 Specification for Titanium and Titanium Alloy Bars and Billets
  • B348/B348M-RU-RU - 19 Стандартные технические условия на прутки и болванки из титана и титановых сплавов
  • B349/B349M - 16 Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • B350/B350M - 11(2016)e1 Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • B351/B351M - 13(2018) Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
  • B352/B352M - 17 Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
  • B353 - 12(2017) Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
  • B354 - 19 Terminology Relating to Uninsulated Metallic Electrical Conductors
  • B355 - 11(2016) Specification for Nickel-Coated Soft or Annealed Copper Wire
  • B359/B359M - 18 Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
  • B360 - 20 Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
  • B361 - 16 Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
  • B362 - 91(2020) Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • B363 - 19 Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
  • B364 - 18 Specification for Tantalum and Tantalum Alloy Ingots
  • B365 - 12(2019) Specification for Tantalum and Tantalum Alloy Rod and Wire
  • B366/B366M - 20 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
  • B367 - 13(2017) Specification for Titanium and Titanium Alloy Castings
  • B367-RU-RU - 13(2017)
  • B368 - 09(2014) Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • B369/B369M - 20 Specification for Copper-Nickel Alloy Castings
  • B370 - 12(2019) Specification for Copper Sheet and Strip for Building Construction
  • B371/B371M - 19 Specification for Copper-Zinc-Silicon Alloy Rod
  • B372 - 17 Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
  • B373 - 19 Specification for Aluminum Foil for Capacitors
  • B374 - 06(2019) Terminology Relating to Electroplating
  • B379 - 20 Specification for Phosphorized Coppers—Refinery Shapes
  • B380 - 97(2018) Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • B381 - 13(2019) Specification for Titanium and Titanium Alloy Forgings
  • B381-RU-RU - 13(2019) Стандартные технические условия на поковки из титана и титанового сплава
  • B386/B386M - 19e1 Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
  • B387 - 18 Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
  • B388 - 06(2018) Specification for Thermostat Metal Sheet and Strip
  • B389 - 81(2020) Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • B391 - 18 Specification for Niobium and Niobium Alloy Ingots
  • B392 - 18 Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
  • B393 - 18 Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
  • B394 - 18 Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • B395/B395M - 18 Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
  • B398/B398M - 15 Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
  • B399/B399M - 04(2015) Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
  • B400/B400M - 19 Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B401 - 12(2016) Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
  • B403 - 20 Specification for Magnesium-Alloy Investment Castings
  • B406 - 96(2015) Test Method for Transverse Rupture Strength of Cemented Carbides
  • B407 - 08a(2019) Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
  • B408 - 06(2016) Specification for Nickel-Iron-Chromium Alloy Rod and Bar
  • B409 - 06(2016) Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
  • B411/B411M - 14(2019) Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • B413 - 97a(2017) Specification for Refined Silver
  • B415 - 16 Specification for Hard-Drawn Aluminum-Clad Steel Wire
  • B416 - 98(2018) Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
  • B417 - 18 Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • B418 - 16a Specification for Cast and Wrought Galvanic Zinc Anodes
  • B422/B422M - 17 Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
  • B423 - 11(2016) Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
  • B423-RU-RU - 11(2016) Стандартные технические условия на бесшовные трубы и трубки из никель-железо-хром-молибден-медного сплава (UNS N08825, N08221 и N06845)
  • B424 - 19e1 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip
  • B425 - 19 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
  • B427 - 09(2015) Specification for Gear Bronze Alloy Castings
  • B428 - 09(2018) Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
  • B429/B429M - 20 Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
  • B432 - 19 Specification for Copper and Copper Alloy Clad Steel Plate
  • B434 - 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip
  • B435 - 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • B438 - 17 Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B439 - 18 Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B440 - 12(2017) Specification for Cadmium
  • B441 - 16 Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
  • B443 - 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
  • B444 - 18 Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
  • B444-RU-RU - 18 Стандартные технические условия на трубы из никель-хроммолибден-ниобиевых сплавов (UNS N06625 и UNS N06852) и никельхром-молибден-кремниевого сплава (UNS N06219)
  • B446 - 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
  • B446-RU-RU - 19 Стандартные технические условия для стержней и прутков из сплава никель-хром-молибден-ниобий (UNS N06625), сплава никель-хром-молибден-кремний (UNS N06219) и сплава никельхром-молибден-вольфрам (UNS N06650)
  • B447 - 12a(2021) Specification for Welded Copper Tube
  • B449 - 93(2015) Specification for Chromates on Aluminum
  • B452 - 09(2015) Specification for Copper-Clad Steel Wire for Electronic Application
  • B453/B453M - 19 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
  • B455/B455M - 20 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
  • B456 - 17 Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
  • B457 - 67(2018) Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • B462 - 18 Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
  • B462-RU-RU - 18 Стандартные технические условия на кованые или катаные фланцы труб, кованые фитинги и арматуру и детали из никелевых сплавов для эксплуатации в коррозионной среде при высокой температуре
  • B463 - 10(2016) Specification for UNS N08020 Alloy Plate, Sheet, and Strip
  • B464/B464M - 15(2020) Specification for Welded UNS N08020 Alloy Pipe
  • B465 - 20 Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B466/B466M - 18 Specification for Seamless Copper-Nickel Pipe and Tube
  • B467 - 14 Specification for Welded Copper-Nickel Pipe
  • B468 - 10(2020) Specification for Welded UNS N08020 Alloy Tubes
  • B470 - 02(2017) Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
  • B472 - 18 Specification for Nickel Alloy Billets and Bars for Reforging
  • B472-RU-RU - 18 Стандартные технические условия на цилиндрические заготовки и прутки из никелевого сплава для перековки
  • B473 - 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
  • B474/B474M - 19 Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
  • B475 - 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
  • B476 - 01(2017) Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
  • B477 - 97(2017) Specification for Gold-Silver-Nickel Electrical Contact Alloy
  • B478 - 85(2016) Test Method for Cross Curvature of Thermostat Metals
  • B479 - 19 Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
  • B480 - 88(2017) Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • B481 - 68(2019) Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • B482 - 85(2019) Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • B483/B483M - 20 Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
  • B487 - 20 Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
  • B488 - 18 Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • B489 - 85(2018) Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • B490 - 09(2014) Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • B491/B491M - 15 Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • B493/B493M - 14(2019) Specification for Zirconium and Zirconium Alloy Forgings
  • B494/B494M - 08(2020) Specification for Primary Zirconium
  • B495 - 10(2017) Specification for Zirconium and Zirconium Alloy Ingots
  • B496 - 16 Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
  • B498/B498M - 19 Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
  • B499 - 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • B500/B500M - 12(2018) Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
  • B501 - 10(2019) Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
  • B502/B502M - 19 Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
  • B504 - 90(2017) Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • B505/B505M - 18 Specification for Copper Alloy Continuous Castings
  • B506 - 16 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
  • B507 - 14 Practice for Design of Articles to Be Electroplated on Racks
  • B508 - 16 Specification for Copper Alloy Strip for Flexible Metal Hose
  • B511/B511M - 16 Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • B512 - 20 Specification for Nickel-Chromium-Silicon Alloy Billets and Bars
  • B514 - 05(2019) Specification for Welded Nickel-Iron-Chromium Alloy Pipe
  • B515 - 20 Specification for Welded Nickel-Iron-Chromium Alloy Tubes
  • B516 - 18 Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
  • B517 - 19 Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
  • B520 - 12(2017) Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
  • B521 - 19 Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
  • B522 - 01(2017) Specification for Gold-Silver-Platinum Electrical Contact Alloy
  • B523/B523M - 18 Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • B524/B524M - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
  • B527 - 20 Test Method for Tap Density of Metal Powders and Compounds
  • B528 - 16(2020)e1 Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • B530 - 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
  • B532 - 85(2014) Specification for Appearance of Electroplated Plastic Surfaces
  • B533 - 85(2019) Test Method for Peel Strength of Metal Electroplated Plastics
  • B534 - 20 Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B535 - 06(2017) Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
  • B536 - 19 Specification for Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip
  • B537 - 70(2019) Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • B539 - 20 Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
  • B540 - 97(2017) Specification for Palladium Electrical Contact Alloy
  • B541 - 01(2018) Specification for Gold Electrical Contact Alloy
  • B542 - 13(2019) Terminology Relating to Electrical Contacts and Their Use
  • B543/B543M - 18 Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
  • B545 - 13 Specification for Electrodeposited Coatings of Tin
  • B546 - 19 Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe
  • B548 - 03(2017) Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
  • B549 - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
  • B550/B550M - 07(2019) Specification for Zirconium and Zirconium Alloy Bar and Wire
  • B551/B551M - 12(2017) Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
  • B552 - 19 Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
  • B555 - 86(2018) Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
  • B556 - 90(2018) Guide for Measurement of Thin Chromium Coatings by Spot Test
  • B557 - 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • B557M - 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
  • B557-RUS - 15 Стандартные методы испытаний на растяжение кованых и литых изделий из алюминиевого и магниевого сплавов
  • B558 - 79(2019) Practice for Preparation of Nickel Alloys for Electroplating
  • B559 - 12(2017) Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • B560 - 20 Specification for Modern Pewter Alloys
  • B561 - 94(2018) Specification for Refined  Platinum
  • B562 - 95(2017) Specification for Refined Gold
  • B563 - 01(2017) Specification for Palladium-Silver-Copper Electrical Contact Alloy
  • B564 - 19 Specification for Nickel Alloy Forgings
  • B564-RU-RU - 19 Стандартные технические условия на поковки из никелевых сплавов
  • B565 - 20 Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
  • B566 - 04a(2016) Specification for Copper-Clad Aluminum Wire
  • B567 - 98(2014) Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • B568 - 98(2014) Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
  • B569 - 19 Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
  • B570 - 16 Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
  • B571 - 18 Practice for Qualitative Adhesion Testing of Metallic Coatings
  • B572 - 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
  • B573 - 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
  • B574 - 18 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
  • B574-RU-RU - 18 Стандартные технические условия на стержни из низкоуглеродистых никель-хром-молибденовых, никель-молибден-хромистых, никельмолибден-хром-танталовых, никель-хром-молибден-медных и никельхром-молибден-вольфрамовых сплавов
  • B575 - 17 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
  • B575-RU-RU - 17 Стандартные технические условия на плиты, листы и штрипсы из низкоуглеродистых никель-хром-молибденовых, никель-хром-молибден-медных, никель-молибден-хром-танталовых, никель-хроммолибден-вольфрамовых и никель-молибден-хромистых сплавов
  • B576 - 94(2016) Guide for Arc Erosion Testing of Electrical Contact Materials
  • B577 - 19 Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • B578 - 87(2015) Test Method for Microhardness of Electroplated Coatings
  • B579 - 73(2015) Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • B580 - 79(2019) Specification for Anodic Oxide Coatings on Aluminum
  • B581 - 17 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
  • B582 - 07(2018) Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
  • B584 - 14 Specification for Copper Alloy Sand Castings for General Applications
  • B587 - 19 Specification for Welded Brass Tube
  • B589 - 94(2017) Specification for Refined Palladium
  • B591 - 20a Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
  • B592 - 20 Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B593 - 21 Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
  • B594 - 19 Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
  • B595 - 11(2016) Specification for Sintered Aluminum Structural Parts
  • B596 - 89(2017) Specification for Gold-Copper Alloy Electrical Contact Material
  • B599 - 20 Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
  • B600 - 11(2017) Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • B601 - 18a Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
  • B602 - 88(2016) Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • B603 - 07(2018) Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
  • B604 - 91(2019) Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • B605 - 95a(2015) Specification for Electrodeposited Coatings of Tin-Nickel Alloy
  • B606/B606M - 19 Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
  • B607 - 15 Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • B608 - 18 Specification for Welded Copper-Alloy Pipe
  • B609/B609M - 12(2016) Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
  • B610 - 19 Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
  • B611 - 13(2018) Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
  • B613 - 17 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
  • B614 - 16 Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • B615 - 79(2017) Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • B616 - 96(2018) Specification for Refined Rhodium
  • B617 - 98(2016) Specification for Coin Silver Electrical Contact Alloy
  • B618/B618M - 18e1 Specification for Aluminum-Alloy Investment Castings
  • B619/B619M - 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
  • B620 - 03(2018) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
  • B621 - 02(2016) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • B622 - 17b Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • B622-RU-RU - 17b Стандартные технические условия на бесшовные трубы большого и малого диаметра из никеля и никель-кобальтового сплава
  • B624 - 07(2017) Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
  • B625 - 17 Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
  • B626 - 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
  • B628 - 98(2016) Specification for Silver-Copper Eutectic Electrical Contact Alloy
  • B629 - 77(2019) Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • B630 - 88(2017) Practice for Preparation of Chromium for Electroplating with Chromium
  • B631 - 93(2016) Specification for Silver-Tungsten Electrical Contact Materials
  • B632/B632M - 18 Specification for Aluminum-Alloy Rolled Tread Plate
  • B633 - 19 Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • B634 - 14a Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • B635 - 00(2015) Specification for Coatings of Cadmium-Tin Mechanically Deposited
  • B636/B636M - 15 Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • B637 - 18 Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
  • B637-RU-RU - 18 Стандартные технические условия на прутки, поковки и кованые заготовки из холоднодеформированных дисперсионно-упрочненных и никелевых сплавов для эксплуатации в условиях средней или высокой температуры
  • B639 - 02(2018) Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
  • B640 - 12a(2021) Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
  • B643 - 18 Specification for Copper-Beryllium Alloy Seamless Tube
  • B644 - 11(2017) Specification for Copper Alloy Addition Agents
  • B645 - 10(2015) Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
  • B646 - 19 Practice for Fracture Toughness Testing of Aluminum Alloys
  • B647 - 10(2016) Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • B648 - 10(2015)e1 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • B649 - 17 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
  • B650 - 95(2018) Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • B651 - 83(2019) Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • B652/B652M - 10(2018) Specification for Niobium-Hafnium Alloy Ingots
  • B653/B653M - 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • B654/B654M - 10(2018) Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
  • B655/B655M - 10(2018) Specification for Niobium-Hafnium Alloy Bar and Wire
  • B657 - 18 Guide for Metallographic Identification of Microstructure in Cemented Carbides
  • B658/B658M - 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • B659 - 90(2014) Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • B660 - 15 Practices for Packaging/Packing of Aluminum and Magnesium Products
  • B661 - 12(2020) Practice for Heat Treatment of Magnesium Alloys
  • B662/B662M - 20 Specification for Silver-Molybdenum Electrical Contact Material
  • B663/B663M - 20 Specification for Silver-Tungsten Carbide Electrical Contact Material
  • B664 - 18 Specification for 80 % Silver-20 % Graphite Sliding Contact Material
  • B665 - 19 Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
  • B666/B666M - 20 Practice for Identification Marking of Aluminum and Magnesium Products
  • B667 - 97(2019) Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • B668 - 14(2019) Specification for UNS N08028 and N08029 Seamless Pipe and Tube
  • B670 - 07(2018) Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
  • B671 - 81(2017) Specification for Refined Iridium
  • B672 - 02(2018) Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
  • B673 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
  • B674 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
  • B675 - 02(2018) Specification for UNS N08367 Welded Pipe
  • B675-RUS - 02(2018) Стандартная спецификация для сварных труб из сплава UNS N08367
  • B676 - 19 Specification for UNS N08367 Welded Tube
  • B677 - 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
  • B678 - 86(2017) Test Method for Solderability of Metallic-Coated Products
  • B679 - 98(2015) Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • B680 - 80(2019) Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • B682 - 01(2016) Specification for Standard Metric Sizes of Electrical Conductors
  • B683 - 20 Specification for Pure Palladium Electrical Contact Material
  • B684/B684M - 16 Specification for Platinum-Iridium Electrical Contact Materials
  • B685 - 20 Specification for Palladium-Copper Electrical Contact Material
  • B686/B686M - 18 Specification for Aluminum Alloy Castings, High-Strength
  • B687 - 99(2016) Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
  • B688 - 18 Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip
  • B689 - 97(2018)e1 Specification for Electroplated Engineering Nickel Coatings
  • B690 - 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
  • B691 - 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
  • B692 - 18 Specification for 75 % Silver-25 % Graphite Sliding Contact Material
  • B693 - 17 Specification for Silver-Nickel Electrical Contact Materials
  • B694 - 19 Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
  • B695 - 04(2016) Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • B696 - 00(2015) Specification for Coatings of Cadmium Mechanically Deposited
  • B697 - 88(2016) Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
  • B698/B698M - 10(2021) Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • B699 - 86(2015) Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • B700 - 20 Specification for Electrodeposited Coatings of Silver for Engineering Use
  • B701/B701M - 13(2018) Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
  • B702 - 93(2019) Specification for Copper-Tungsten Electrical Contact Material
  • B703 - 17 Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
  • B704 - 19 Specification for Welded Nickel Alloy Tubes
  • B704-RU-RU - 19 Стандартные технические условия на сварные трубы из никелевых сплавов
  • B705 - 17 Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
  • B705-RU-RU - 17 Стандартные технические условия на сварные трубы из никелевых сплавов (UNS N06625, N06219 и N08825)
  • B706 - 18 Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • B708 - 12(2019) Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
  • B709 - 17 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
  • B710 - 20a Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
  • B711 - 18 Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
  • B717 - 96(2018) Specification for Refined Ruthenium
  • B718 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
  • B719 - 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
  • B722 - 06(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
  • B723 - 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
  • B725 - 18 Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
  • B726 - 02(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
  • B727 - 04(2020) Practice for Preparation of Plastics Materials for Electroplating
  • B729 - 20 Specification for Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube
  • B730 - 08(2018) Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
  • B733 - 15 Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • B733-RU-RU - 15 Стандартные технические условия на автокаталитические (химические) никель-фосфорные покрытия на металле
  • B734 - 97(2018) Specification for Electrodeposited Copper for Engineering Uses
  • B735 - 16 Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
  • B737 - 10(2015) Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
  • B738 - 13(2018) Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • B739 - 03(2018) Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
  • B740 - 09(2015) Specification for Copper-Nickel-Tin Spinodal Alloy Strip
  • B743 - 12(2020) Specification for Seamless Copper Tube in Coils
  • B744/B744M - 15(2020) Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • B745/B745M - 15 Specification for Corrugated Aluminum Pipe for Sewers and Drains
  • B746/B746M - 16 Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
  • B747 - 20 Specification for Copper-Zirconium Alloy Sheet and Strip
  • B748 - 90(2016) Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • B749 - 20 Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
  • B750 - 16 Specification for GALFAN
  • B751 - 20 Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
  • B752/B752M - 18 Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
  • B753 - 07(2018) Specification for Thermostat Component Alloys
  • B754 - 17 Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
  • B755 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
  • B756 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy(UNS N06110) Rod and Bar
  • B757 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
  • B758 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
  • B759 - 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
  • B760 - 07(2019) Specification for Tungsten Plate, Sheet, and Foil
  • B761 - 17 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • B761-RU-RU - 17 Стандартный метод испытания гранулометрического состава металлических порошков и связанных с ними соединений с помощью контрольного рентгеновского исследования гравитационного осаждения
  • B762 - 90(2016) Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • B763/B763M - 15 Specification for Copper Alloy Sand Castings for Valve Applications
  • B764 - 04(2014) Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • B765 - 03(2018) Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • B766 - 86(2015) Specification for Electrodeposited Coatings of Cadmium
  • B767 - 88(2016) Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • B768 - 11(2016) Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
  • B769 - 11(2016) Test Method for Shear Testing of Aluminum Alloys
  • B770 - 15 Specification for Copper-Beryllium Alloy Sand Castings for General Applications
  • B771 - 11(2017) Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • B772 - 97(2012) Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
  • B774 - 00(2014) Specification for Low Melting Point Alloys
  • B775/B775M - 19 Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • B776 - 12(2019) Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
  • B777 - 15(2020) Specification for Tungsten Base, High-Density Metal
  • B778 - 19 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
  • B779 - 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
  • B780 - 16 Specification for 75 % Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy
  • B781 - 93a(2012) Guide for Silver-Cadmium Oxide Contact Material
  • B783 - 19 Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
  • B784 - 01(2017)e1 Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
  • B786/B786M - 08(2018) Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
  • B787/B787M - 04(2020) Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
  • B788/B788M - 09(2020) Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • B789/B789M - 16 Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • B790/B790M - 16 Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
  • B792 - 16 Specification for Zinc Alloys in Ingot Form for Slush Casting
  • B793 - 16 Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
  • B794 - 97(2020) Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
  • B795 - 20 Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
  • B796 - 20 Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
  • B797 - 20 Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
  • B798 - 95(2020) Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
  • B799 - 95(2020) Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • B800 - 05(2015) Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
  • B801 - 18 Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
  • B802/B802M - 19 Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
  • B803/B803M - 19 Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B804 - 02(2018) Specification for UNS N08367 and UNS N08926 Welded Pipe
  • B805 - 06(2017)e1 Specification for Precipitation Hardening Nickel Alloys Bar and Wire
  • B805-RU-RU - 06(2017)e1 Стандартные технические условия на прутки и проволоку из никелевых сплавов дисперсионного твердения
  • B806 - 14 Specification for Copper Alloy Permanent Mold Castings for General Applications
  • B807/B807M - 20 Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
  • B808 - 10(2020) Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
  • B809 - 95(2018) Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
  • B810 - 01a(2017) Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
  • B811 - 13(2017) Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
  • B812 - 18 Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
  • B813 - 16 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
  • B814 - 06(2020) Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip
  • B815 - 02(2016) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
  • B816 - 00(2015) Specification for Coatings of Cadmium-Zinc Mechanically Deposited
  • B818 - 03(2018) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
  • B819 - 19 Specification for Seamless Copper Tube for Medical Gas Systems
  • B820 - 18 Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
  • B821 - 10(2016) Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
  • B822 - 20 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
  • B823 - 20 Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
  • B824 - 17 Specification for General Requirements for Copper Alloy Castings
  • B825 - 19 Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • B826 - 09(2020) Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
  • B827 - 05(2020) Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
  • B828 - 16 Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
  • B829 - 19a Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
  • B829-RU-RU - 19a Стандартные технические условия на общие требования для бесшовных труб и трубок из никеля и никелевых сплавов
  • B830 - 18 Specification for Uniform Test Methods and Frequency
  • B831 - 19 Test Method for Shear Testing of Thin Aluminum Alloy Products
  • B832 - 93(2018) Guide for Electroforming with Nickel and Copper
  • B833 - 20 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
  • B834 - 17 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
  • B835 - 14(2020) Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
  • B836 - 00(2015) Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B837 - 19 Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
  • B839 - 04(2014) Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method
  • B840 - 15 Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
  • B841 - 18 Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
  • B842 - 99(2016) Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
  • B843 - 18e1 Specification for Magnesium Alloy Anodes for Cathodic Protection
  • B844 - 98(2016) Guide for Silver-Tin Oxide Contact Material
  • B845 - 97(2018) Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
  • B846 - 19a Terminology for Copper and Copper Alloys
  • B848 - 15 Specification for Powder Forged (PF) Ferrous Materials
  • B849 - 02(2019) Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
  • B850 - 98(2015) Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
  • B851 - 04(2020) Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
  • B852 - 16e1 Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
  • B853 - 16 Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
  • B854 - 98(2016) Guide for Measuring Electrical Contact Intermittences
  • B855 - 17 Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
  • B856 - 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
  • B857 - 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
  • B858 - 06(2018) Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
  • B859 - 13(2018) Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
  • B860 - 18 Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
  • B861 - 19 Specification for Titanium and Titanium Alloy Seamless Pipe
  • B862 - 19 Specification for Titanium and Titanium Alloy Welded Pipe
  • B863 - 19 Specification for Titanium and Titanium Alloy Wire
  • B864/B864M - 19 Specification for Corrugated Aluminum Box Culverts
  • B865 - 20 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
  • B866 - 95(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
  • B867 - 95(2018) Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
  • B869 - 07(2018) Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
  • B870 - 08(2014) Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
  • B872 - 19 Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
  • B873 - 17 Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • B874 - 96(2018) Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
  • B875 - 96(2018) Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
  • B877 - 96(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
  • B878 - 97(2019) Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
  • B879 - 17 Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
  • B880 - 14(2019) Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
  • B880-RU-RU - 14(2019) Стандартные технические условия на общие требования к пределам химического контрольного анализа никеля, никелевых сплавов и кобальтовых сплавов
  • B881 - 17 Terminology Relating to Aluminum- and Magnesium-Alloy Products
  • B882 - 10(2018) Specification for Pre-Patinated Copper for Architectural Applications
  • B883 - 19 Specification for Metal Injection Molded (MIM) Materials
  • B884 - 11(2019) Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • B885 - 09(2020) Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
  • B886 - 19 Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
  • B887 - 12(2019) Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
  • B888/B888M - 19 Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
  • B890 - 20 Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • B891/B891M - 19 Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
  • B892 - 10(2015) Specification for ACuZinc5
  • B893 - 98(2018) Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • B894 - 17 Specification for ACuZinc5
  • B895 - 16(2020)e1 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
  • B896 - 10(2020) Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
  • B897 - 18 Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
  • B898 - 20 Specification for Reactive and Refractory Metal Clad Plate
  • B899 - 18 Terminology Relating to Non-ferrous Metals and Alloys
  • B900 - 16 Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
  • B901 - 04(2015) Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B902/B902M - 13(2018) Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
  • B903 - 15 Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
  • B904 - 00(2014) Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
  • B905 - 00(2016) Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  • B906 - 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • B906 - 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • B907 - 16 Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
  • B908 - 19 Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
  • B909 - 17 Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
  • B910/B910M - 07(2018) Specification for Annealed Copper-Clad Steel Wire
  • B911/B911M - 12(2016) Specification for ACSR Twisted Pair Conductor (ACSR/TP)
  • B912 - 02(2018) Specification for Passivation of Stainless Steels Using Electropolishing
  • B913 - 05(2015) Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
  • B914 - 19 Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
  • B915 - 01(2017) Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
  • B916 - 01(2017) Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
  • B917/B917M - 12(2020) Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
  • B918/B918M - 20a Practice for Heat Treatment of Wrought Aluminum Alloys
  • B919 - 19 Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
  • B920 - 16 Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
  • B921 - 08(2018) Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
  • B922 - 20 Test Method for Metal Powder Specific Surface Area by Physical Adsorption
  • B923 - 20 Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • B924 - 02(2017) Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • B925 - 15 Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
  • B926 - 09(2017) Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
  • B927/B927M - 17 Specification for Brass Rod, Bar, and Shapes
  • B928/B928M - 15 Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
  • B929 - 17 Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
  • B930 - 03(2017) Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
  • B931 - 14(2018)e1 Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
  • B933 - 20 Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
  • B934 - 15 Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
  • B935 - 20 Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
  • B936 - 19 Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
  • B937 - 18 Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
  • B939 - 15 Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
  • B940 - 05(2020) Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
  • B941 - 16 Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
  • B942 - 10(2015) Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
  • B943 - 16 Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
  • B944 - 11(2016) Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
  • B945 - 06(2014) Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers
  • B946 - 11(2016) Test Method for Surface Finish of Powder Metallurgy (PM) Products
  • B947 - 14(2020)e1 Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
  • B949 - 18 Specification for General Requirements for Zinc and Zinc Alloy Products
  • B950 - 20 Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
  • B951 - 11(2018) Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
  • B952/B952M - 19 Specification for Zinc Alloys in Ingot Form for Spin Casting
  • B953 - 13 Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • B954 - 15 Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • B955/B955M - 18 Specification for Aluminum-Alloy Centrifugal Castings
  • B956 - 19e1 Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
  • B957/B957M - 19 Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
  • B958/B958M - 19 Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B960 - 18 Specification for Prime Western Grade-Recycled (PWG-R) Zinc
  • B961 - 13(2019) Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
  • B962 - 17 Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • B963 - 17 Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • B964 - 16 Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
  • B965 - 09(2018) Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
  • B967/B967M - 18 Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
  • B968/B968M - 16 Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
  • B969/B969M - 18e1 Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
  • B971 - 10(2020)e1 Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
  • B972 - 10(2020)e1 Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
  • B973 - 10(2020)e1 Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
  • B974/B974M - 16(2021) Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
  • B975 - 18e1 Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
  • B976 - 11(2015) Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
  • B977/B977M - 19 Specification for Titanium and Titanium Alloy Ingots
  • B977/B977M-RU-RU - 19 Технические условия на литые заготовки из титана и сплава титана
  • B978/B978M - 14 Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
  • B979 - 12(2018) Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
  • B981/B981M - 19 Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes
  • B982 - 20 Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
  • B983 - 16e1 Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
  • B984 - 12(2020)e1 Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use
  • B985 - 12(2016) Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
  • B986 - 13(2019) Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
  • B987/B987M - 20 Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
  • B988 - 18 Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
  • B989 - 19a Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
  • B994/B994M - 15 Specification for Nickel-Cobalt Alloy Coating
  • B995 - 15a Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
  • B997 - 16e1 Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
  • B998 - 17 Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
  • B999 - 15 Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

B1000-B1999Edit

  • B1000 - 15 Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
  • B1001 - 17 Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
  • B1002 - 16(2020) Specification for Refined Indium
  • B1003 - 16 Specification for Seamless Copper Tube for Linesets
  • B1004 - 16 Practice for Contact Performance Classification of Electrical Connection Systems
  • B1005 - 17 Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
  • B1006 - 17 Specification for Electrical Overhead Conductor Code Word Names
  • B1007 - 17 Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
  • B1008 - 18 Test Method for Stress-Strain Testing for Overhead Electrical Conductors
  • B1009 - 20 Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures
  • B1010/B1010M - 19 Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
  • B1011/B1011M - 19 Specification for Cobalt Alloy Spring Wire
  • B1013 - 20 Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
  • B1014 - 20 Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
  • B1015 - 20 Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloy

CEdit

C1-C999Edit

  • C4 - 04(2018) Specification for Clay Drain Tile and Perforated Clay Drain Tile
  • C5 - 18 Specification for Quicklime for Structural Purposes
  • C10/C10M - 19 Specification for Natural Cement
  • C11 - 18b Terminology Relating to Gypsum and Related Building Materials and Systems
  • C12 - 17e1 Practice for Installing Vitrified Clay Pipe Lines
  • C14 - 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
  • C14M - 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
  • C16 - 03(2018) Test Method for Load Testing Refractory Shapes at High Temperatures
  • C20 - 00(2015) Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
  • C22/C22M - 00(2015) Specification for Gypsum
  • C24 - 09(2018) Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
  • C25 - 19 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
  • C25-RU-RU - 19 Стандартные методы химического анализа известняка, негашеной и гашеной извести
  • C27 - 98(2018) Classification of Fireclay and High-Alumina Refractory Brick
  • C28/C28M - 10(2020) Specification for Gypsum Plasters
  • C29/C29M - 17a Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • C29/C29M-SP - 17a Método de prueba estándar para determinar la densidad a granel (“peso unitario”) y los huecos de aire de un agregado
  • C29/C29M-POR - 17a Método de ensaio padrão para Densidade a granel (“peso unitário”) e vazios no agregado
  • C31/C31M - 19a Practice for Making and Curing Concrete Test Specimens in the Field
  • C31/C31M-SP - 19a Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el campo
  • C31/C31M-POR - 19a Prática padrão para Fazer e curar espécimes de ensaio de concreto no campo
  • C32 - 13(2017) Specification for Sewer and Manhole Brick (Made From Clay or Shale)
  • C33/C33M - 18 Specification for Concrete Aggregates
  • C33/C33M-SP - 18 Especificación estándar para agregados para hormigón
  • C33/C33M-POR - 18 Especificação padrão para Agregados de concreto
  • C34 - 17 Specification for Structural Clay Loadbearing Wall Tile
  • C35 - 01(2019) Specification for Inorganic Aggregates for Use in Gypsum Plaster
  • C39/C39M - 20 Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • C39/C39M-SP - 20 Método de prueba estándar para la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón
  • C39/C39M-POR - 20 Método de ensaio padrão para Resistência à compressão de espécimes de concreto cilíndricos
  • C40/C40M - 20 Test Method for Organic Impurities in Fine Aggregates for Concrete
  • C40/C40M-SP - 20 Método de prueba estándar para la determinación de impurezas orgánicas en agregados finos para hormigón
  • C40/C40M-POR - 20 Método de ensaio padrão para Impurezas orgânicas em agregados miúdos para concreto
  • C42/C42M - 20 Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  • C42/C42M-POR - 20 Método de ensaio padrão para Obter e ensaiar testemunhos perfurados e vigas serradas de concreto
  • C50/C50M - 13(2019) Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
  • C51 - 20 Terminology Relating to Lime and Limestone (as Used by the Industry)
  • C55 - 17 Specification for Concrete Building Brick
  • C56 - 13(2017) Specification for Structural Clay Nonloadbearing Tile
  • C59/C59M - 00(2020) Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
  • C61/C61M - 00(2020) Specification for Gypsum Keene's Cement
  • C62 - 17 Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
  • C67/C67M - 20 Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • C70 - 20 Test Method for Surface Moisture in Fine Aggregate
  • C71 - 12(2018) Terminology Relating to Refractories
  • C73 - 17 Specification for Calcium Silicate Brick (Sand-Lime Brick)
  • C76 - 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • C76M - 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
  • C78/C78M - 18 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • C78/C78M-SP - 18 Método de prueba estándar para determinar la resistencia a la flexión del hormigón (usando una viga simple con carga de tres puntos)
  • C78/C78M-POR - 18 Método de ensaio padrão para Resistência flexural do concreto (usando viga simples com terceiro ponto de aplicação de carga)
  • C87/C87M - 17 Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • C88/C88M - 18 Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • C90 - 16a Specification for Loadbearing Concrete Masonry Units
  • C91/C91M - 18 Specification for Masonry Cement
  • C92 - 95(2015) Test Methods for Sieve Analysis and Water Content of Refractory Materials
  • C94/C94M - 20 Specification for Ready-Mixed Concrete
  • C94/C94M-SP - 20 Especificación de estándar para hormigón elaborado
  • C94/C94M-POR - 20 Especificação padrão para Concreto pré-misturado
  • C97/C97M - 18 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
  • C99/C99M - 18 Test Method for Modulus of Rupture of Dimension Stone
  • C108 - 46(2018) Symbols for Heat Transmission
  • C109/C109M - 20b Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)
  • C109/C109M-SP - 20b Método de prueba estándar para resistencia a la compresión de morteros de cemento hidráulico (utilizando especímenes cúbicos de 2 in. o [50 mm])
  • C109/C109M-POR - 20b Método de ensaio padrão para Resistência à compressão de argamassas de cimento hidráulico (usando espécimes de cubo de 2 in. ou [50 mm])
  • C110 - 20 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
  • C113 - 14(2019) Test Method for Reheat Change of Refractory Brick
  • C114 - 18 Test Methods for Chemical Analysis of Hydraulic Cement
  • C114-RUS - 18 Методы химического анализа гидравлического цемента
  • C117 - 17 Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
  • C117-SP - 17 Método de prueba estándar para materiales más finos que un tamiz de 75 μm (N.° 200) en los agregados minerales mediante lavado
  • C117-POR - 17 Método de ensaio padrão para Materiais mais finos do que a peneira de 75 μm (n.º 200) em agregados minerais por lavagem
  • C118 - 19 Specification for Concrete Pipe for Irrigation or Drainage
  • C118M - 19 Specification for Concrete Pipe for Irrigation or Drainage (Metric)
  • C119 - 20 Terminology Relating to Dimension Stone
  • C120/C120M - 19 Test Methods for Flexure Testing of Structural and Roofing Slate
  • C121/C121M - 20 Test Method for Water Absorption of Slate
  • C123/C123M - 14 Test Method for Lightweight Particles in Aggregate
  • C125 - 20 Terminology Relating to Concrete and Concrete Aggregates
  • C126 - 19 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
  • C127 - 15 Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
  • C127-SP - 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado grueso
  • C127-POR - 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados graúdos
  • C128 - 15 Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
  • C128-SP - 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado fino
  • C128-RU-RU - 15 Стандартный метод испытания для определения относительной плотности (удельного веса) и поглощения мелкого заполнителя
  • C128-POR - 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados miúdos
  • C129 - 17 Specification for Nonloadbearing Concrete Masonry Units
  • C131/C131M - 20 Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • C133 - 97(2015) Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
  • C134 - 95(2016) Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
  • C135 - 96(2015) Test Method for True Specific Gravity of Refractory Materials by Water Immersion
  • C136/C136M - 19 Test Method for Sieve Analysis of Fine and Coarse Aggregates
  • C136/C136M-SP - 19 Método de prueba estándar para análisis granulométrico de agregados finos y gruesos
  • C136/C136M-POR - 19 Método de ensaio padrão para Análise de peneira de agregados miúdos e graúdos
  • C138/C138M - 17a Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C138/C138M-SP - 17a Método de Ensayo Normalizado de Densidad (Peso Unitario), Rendimiento, y Contenido de Aire (Gravimétrico) del Concreto
  • C138/C138M-POR - 17a Método de ensaio padrão para Densidade (peso unitário), rendimento e teor de ar (gravimétrico) do concreto
  • C139 - 17 Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
  • C140/C140M - 20a Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
  • C141/C141M - 14 Specification for Hydrated Hydraulic Lime for Structural Purposes
  • C142/C142M - 17 Test Method for Clay Lumps and Friable Particles in Aggregates
  • C143/C143M - 20 Test Method for Slump of Hydraulic-Cement Concrete
  • C143/C143M-SP - 20 Método de prueba estándar para el asentamiento del hormigón de cemento hidráulico
  • C143/C143M-POR - 20 Método de ensaio padrão para Abatimento do concreto de cimento hidráulico
  • C144 - 18 Specification for Aggregate for Masonry Mortar
  • C144-SP - 18 Especificación de estándar para agregados de mortero de albañilería
  • C144-POR - 18 Especificação padrão para Agregados para argamassa de alvenaria
  • C146 - 94a(2014) Test Methods for Chemical Analysis of Glass Sand
  • C147 - 86(2020) Test Methods for Internal Pressure Strength of Glass Containers
  • C148 - 17 Test Methods for Polariscopic Examination of Glass Containers
  • C149 - 14(2020) Test Method for Thermal Shock Resistance of Glass Containers
  • C150/C150M - 20 Specification for Portland Cement
  • C150/C0150M-SP - Especificación de estándar para cemento Portland
  • C150/C150M-POR - 20 Especificação padrão para Cimento Portland
  • C151/C151M - 18 Test Method for Autoclave Expansion of Hydraulic Cement
  • C155 - 97(2018) Classification of Insulating Firebrick
  • C156 - 20 Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
  • C157/C157M - 17 Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • C158 - 02(2017) Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
  • C159 - 06(2016) Specification for Vitrified Clay Filter Blocks
  • C162 - 05(2015) Terminology of Glass and Glass Products
  • C163 - 05(2016) Practice for Mixing Thermal Insulating Cement Samples
  • C165 - 07(2017) Test Method for Measuring Compressive Properties of Thermal Insulations
  • C166 - 05(2016) Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • C167 - 18 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
  • C168 - 19 Terminology Relating to Thermal Insulation
  • C169 - 16 Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
  • C170/C170M - 17 Test Method for Compressive Strength of Dimension Stone
  • C171 - 20 Specification for Sheet Materials for Curing Concrete
  • C172/C172M - 17 Practice for Sampling Freshly Mixed Concrete
  • C172/C172M-SP - 17 Práctica estándar para Obtención de muestras de hormigón recién mezclado
  • C172/C172M-POR - 17 Prática padrão para Amostragem de concreto recém-misturado
  • C173/C173M - 16 Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C173/C173M-SP - 16 Método de Ensayo Normalizado de Contenido de Aire de Concreto Recién Mezclado por el Método Volumétrico
  • C173/C173M-POR - 16 Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método volumétrico
  • C174/C174M - 17 Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
  • C177 - 19 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
  • C179 - 14(2019) Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
  • C181 - 11(2018) Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
  • C182 - 19 Test Method for Thermal Conductivity of Insulating Firebrick
  • C183/C183M - 16 Practice for Sampling and the Amount of Testing of Hydraulic Cement
  • C183/C183M-RUS - 16 Стандартная методика отбора проб и определения объема испытаний гидравлического цемента1
  • C185 - 20 Test Method for Air Content of Hydraulic Cement Mortar
  • C187 - 16 Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
  • C188 - 17 Test Method for Density of Hydraulic Cement
  • C191 - 19 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
  • C192/C192M - 19 Practice for Making and Curing Concrete Test Specimens in the Laboratory
  • C192/C192M-SP - 19 Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el laboratorio
  • C192/C192M-POR - 19 Prática padrão para Fazer e curar espécimes de ensaio de concreto no laboratório
  • C195 - 07(2019) Specification for Mineral Fiber Thermal Insulating Cement
  • C196 - 00(2019) Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
  • C198 - 09(2019) Test Method for Cold Bonding Strength of Refractory Mortar
  • C199 - 84(2016) Test Method for Pier Test for Refractory Mortars
  • C201 - 93(2019) Test Method for Thermal Conductivity of Refractories
  • C202 - 19 Test Method for Thermal Conductivity of Refractory Brick
  • C203 - 05a(2017) Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
  • C204 - 18e1 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • C204-RU-RU - 18e1 Стандартные методы испытания тонкости помола гидравлического цемента воздухопроницаемым оборудованием
  • C206 - 14 Specification for Finishing Hydrated Lime
  • C207 - 18 Specification for Hydrated Lime for Masonry Purposes
  • C208 - 12(2017)e2 Specification for Cellulosic Fiber Insulating Board
  • C209 - 20 Test Methods for Cellulosic Fiber Insulating Board
  • C210 - 95(2019) Test Method for Reheat Change of Insulating Firebrick
  • C212 - 20 Specification for Structural Clay Facing Tile
  • C215 - 19 Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
  • C216 - 19 Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
  • C217/C217M - 20 Test Method for Weather Resistance of Slate
  • C219 - 20a Terminology Relating to Hydraulic and Other Inorganic Cements
  • C220 - 91(2015) Specification for Flat Asbestos-Cement Sheets
  • C224 - 78(2020) Practice for Sampling Glass Containers
  • C225 - 85(2014) Test Methods for Resistance of Glass Containers to Chemical Attack
  • C226 - 19 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
  • C230/C230M - 20 Specification for Flow Table for Use in Tests of Hydraulic Cement
  • C231/C231M - 17a Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • C231/C231M-SP - 17a Método de Ensayo Normalizado de Contenido de Aire del Concreto Recién Mezclado Mediante el Método por Presión
  • C231/C231M-POR - 17a Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método de pressão
  • C232/C232M - 20 Test Method for Bleeding of Concrete
  • C233/C233M - 18 Test Method for Air-Entraining Admixtures for Concrete
  • C240 - 20 Test Methods for Testing Cellular Glass Insulation Block
  • C241/C241M - 20 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
  • C242 - 20b Terminology of Ceramic Whitewares and Related Products
  • C260/C260M - 10a(2016) Specification for Air-Entraining Admixtures for Concrete
  • C260/C260M-SP - 10a(2016) Especificación Normalizada para Aditivos Incorporadores de Aire para Concreto
  • C260/C260M-POR - 10a(2016) Especificação padrão para Aditivos incorporadores de ar para concreto
  • C266 - 20 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
  • C267 - 20 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
  • C270 - 19ae1 Specification for Mortar for Unit Masonry
  • C271/C271M - 16 Test Method for Density of Sandwich Core Materials
  • C272/C272M - 18 Test Method for Water Absorption of Core Materials for Sandwich Constructions
  • C273/C273M - 20 Test Method for Shear Properties of Sandwich Core Materials
  • C279 - 17 Specification for Chemical-Resistant Masonry Units
  • C282 - 20 Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
  • C283 - 13(2017) Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
  • C285 - 10(2020) Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
  • C286 - 99(2017) Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
  • C287 - 98(2012) Specification for Chemical-Resistant Sulfur Mortar
  • C288 - 20 Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
  • C293/C293M - 16 Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
  • C294 - 19 Descriptive Nomenclature for Constituents of Concrete Aggregates
  • C295/C295M - 19 Guide for Petrographic Examination of Aggregates for Concrete
  • C296/C296M - 00(2015) Specification for Asbestos-Cement Pressure Pipe
  • C297/C297M - 16 Test Method for Flatwise Tensile Strength of Sandwich Constructions
  • C297/C297M-RU-RU - 16 Стандартный метод испытаний определения прочности на растяжение перпендикулярно к плоскости «сэндвич»конструкций
  • C301 - 18 Test Methods for Vitrified Clay Pipe
  • C302 - 13(2017) Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
  • C303 - 10(2016)e1 Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
  • C305 - 20 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • C307 - 18 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
  • C308 - 18 Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
  • C309 - 19 Specification for Liquid Membrane-Forming Compounds for Curing Concrete
  • C311/C311M - 18 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • C315 - 07(2016) Specification for Clay Flue Liners and Chimney Pots
  • C317/C317M - 00(2019) Specification for Gypsum Concrete
  • C318/C318M - 13(2018) Specification for Gypsum Formboard
  • C321 - 00(2012) Test Method for Bond Strength of Chemical-Resistant Mortars
  • C322 - 09(2018) Practice for Sampling Ceramic Whiteware Clays
  • C323 - 56(2016) Test Methods for Chemical Analysis of Ceramic Whiteware Clays
  • C324 - 01(2014) Test Method for Free Moisture in Ceramic Whiteware Clays
  • C325 - 07(2014) Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
  • C326 - 09(2018) Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
  • C329 - 88(2020) Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
  • C330/C330M - 17a Specification for Lightweight Aggregates for Structural Concrete
  • C330/C330M-SP - 17a Especificación de estándar para agregados ligeros para hormigón estructural
  • C330/C330M-POR - 17a Especificação padrão para Agregados leves para concreto estrutural
  • C331/C331M - 17 Specification for Lightweight Aggregates for Concrete Masonry Units
  • C332 - 17 Specification for Lightweight Aggregates for Insulating Concrete
  • C335/C335M - 17 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
  • C336 - 71(2020) Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
  • C338 - 93(2019) Test Method for Softening Point of Glass
  • C341/C341M - 18 Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
  • C346 - 87(2018) Test Method for 45-deg Specular Gloss of Ceramic Materials
  • C348 - 20 Test Method for Flexural Strength of Hydraulic-Cement Mortars
  • C349 - 18 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
  • C356 - 17 Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • C357 - 07(2015) Test Method for Bulk Density of Granular Refractory Materials
  • C359 - 20 Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)
  • C361 - 19a Specification for Reinforced Concrete Low-Head Pressure Pipe
  • C361M - 19 Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
  • C363/C363M - 16 Test Method for Node Tensile Strength of Honeycomb Core Materials
  • C364/C364M - 16 Test Method for Edgewise Compressive Strength of Sandwich Constructions
  • C365/C365M - 16 Test Method for Flatwise Compressive Properties of Sandwich Cores
  • C365/C365M-RUS - 16 Стандартный метод определения свойств многослойных заполнителей при их сжатии перпендикулярно слоям
  • C366/C366M - 16 Test Methods for Measurement of Thickness of Sandwich Cores
  • C366/C366M-RUS - 16 Стандартные методы измерения толщины заполнителей слоистых конструкций
  • C367/C367M - 16 Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
  • C368 - 88(2020) Test Method for Impact Resistance of Ceramic Tableware
  • C370 - 12(2020) Test Method for Moisture Expansion of Fired Whiteware Products
  • C371 - 09(2018) Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
  • C372 - 94(2020) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
  • C373 - 18 Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
  • C374 - 14(2018) Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
  • C375 - 58(2016) Classification of Water Used in Milling of Porcelain Enamel
  • C384 - 04(2016) Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
  • C385 - 58(2018) Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
  • C386 - 93(2012) Practice for Use of Chemical-Resistant Sulfur Mortar
  • C387/C387M - 17 Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
  • C390 - 08(2019) Practice for Sampling and Acceptance of Thermal Insulation Lots
  • C393/C393M - 20 Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
  • C394/C394M - 16 Test Method for Shear Fatigue of Sandwich Core Materials
  • C395 - 01(2012) Specification for Chemical-Resistant Resin Mortars
  • C397 - 00(2012) Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
  • C398 - 98(2012) Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
  • C399 - 98(2012) Practice for Use of Chemical-Resistant Resin Mortars
  • C400 - 19 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
  • C401 - 12(2018) Classification of Alumina and Alumina-Silicate Castable Refractories
  • C403/C403M - 16 Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
  • C404 - 18 Specification for Aggregates for Masonry Grout
  • C406/C406M - 15 Specification for Roofing Slate
  • C408 - 88(2020) Test Method for Thermal Conductivity of Whiteware Ceramics
  • C410 - 13(2017) Specification for Industrial Floor Brick
  • C411 - 19 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
  • C412 - 19 Specification for Concrete Drain Tile
  • C412M - 19 Specification for Concrete Drain Tile (Metric)
  • C413 - 18 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • C414 - 03(2012) Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
  • C416 - 97(2018) Classification of Silica Refractory Brick
  • C417 - 05(2015) Test Method for Thermal Conductivity of Unfired Monolithic Refractories
  • C418 - 20 Test Method for Abrasion Resistance of Concrete by Sandblasting
  • C419 - 20 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
  • C421 - 08(2020) Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
  • C423 - 17 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
  • C424 - 93(2020) Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
  • C425 - 04(2018) Specification for Compression Joints for Vitrified Clay Pipe and Fittings
  • C425-SP - 04(2018)
  • C425-POR - 04(2018) Especificação padrão para Juntas de compressão para tubo cerâmico vitrificado e acessórios
  • C426 - 16 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • C428/C428M - 05(2019) Specification for Asbestos-Cement Nonpressure Sewer Pipe
  • C429 - 16 Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
  • C430 - 17 Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
  • C441/C441M - 17 Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
  • C443 - 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
  • C443M - 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
  • C444 - 17 Specification for Perforated Concrete Pipe
  • C444M - 17 Specification for Perforated Concrete Pipe (Metric)
  • C447 - 15 Practice for Estimating the Maximum Use Temperature of Thermal Insulations
  • C448 - 88(2016) Test Methods for Abrasion Resistance of Porcelain Enamels
  • C449 - 07(2019) Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
  • C450 - 18 Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
  • C451 - 19 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
  • C452 - 19e1 Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
  • C454 - 10(2017) Test Method for Disintegration of Carbon Refractories by Alkali
  • C455 - 07(2018) Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
  • C456 - 18 Test Method for Hydration Resistance of Basic Bricks and Shapes
  • C457/C457M - 16 Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • C458/C458M - 98(2019) Test Method for Organic Fiber Content of Asbestos-Cement Products
  • C459/C459M - 97(2019) Test Methods for Asbestos-Cement Flat Products
  • C461 - 17 Test Methods for Mastics and Coatings Used With Thermal Insulation
  • C465 - 19 Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
  • C465-RU-RU - 19 Стандартные технические условия на технологические добавки для использования в производстве гидравлического цемента
  • C466 - 03(2012) Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
  • C467 - 14(2018) Classification of Mullite Refractories
  • C469/C469M - 14 Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
  • C470/C470M - 15 Specification for Molds for Forming Concrete Test Cylinders Vertically
  • C471M - 20a Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
  • C472 - 20 Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
  • C473 - 19 Test Methods for Physical Testing of Gypsum Panel Products
  • C474 - 15(2020) Test Methods for Joint Treatment Materials for Gypsum Board Construction
  • C475/C475M - 17 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
  • C476 - 20 Specification for Grout for Masonry
  • C478/C478M - 20 Specification for Circular Precast Reinforced Concrete Manhole Sections
  • C479 - 04(2017) Specification for Vitrified Clay Liner Plates
  • C480/C480M - 16 Test Method for Flexure Creep of Sandwich Constructions
  • C481 - 99(2016) Test Method for Laboratory Aging of Sandwich Constructions
  • C482 - 20 Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
  • C484 - 20 Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
  • C485 - 16 Test Method for Measuring Warpage of Ceramic Tile
  • C488 - 16 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
  • C490/C490M - 17 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
  • C492 - 92(2017)e1 Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
  • C494/C494M - 19 Specification for Chemical Admixtures for Concrete
  • C494/C494M-SP - 19 Especificación de estándar para aditivos químicos para hormigón
  • C494/C494M-POR - 19 Especificação padrão para Aditivos químicos para concreto
  • C495/C495M - 12(2019) Test Method for Compressive Strength of Lightweight Insulating Concrete
  • C496/C496M - 17 Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • C496/C496M-SP - 17 Método de prueba estándar para Determinación de la resistencia a la tracción por compresión diametral de especímenes cilíndricos de hormigón
  • C496/C496M-POR - 17 Método de ensaio padrão para Resistência à tração por compressão diametral de espécimes de concreto cilíndricos
  • C497M - 20a Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
  • C497 - 20e1 Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
  • C499 - 20 Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
  • C500/C500M - 07(2019) Test Methods for Asbestos-Cement Pipe
  • C501 - 84(2015) Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  • C502 - 16 Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
  • C503/C503M - 15 Specification for Marble Dimension Stone
  • C505 - 19 Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
  • C505M - 19 Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
  • C506M - 20 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
  • C506 - 20e1 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
  • C507 - 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
  • C507M - 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
  • C508/C508M - 00(2015) Specification for Asbestos-Cement Underdrain Pipe
  • C509 - 06(2015) Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
  • C510 - 16 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
  • C511 - 19 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
  • C512/C512M - 15 Test Method for Creep of Concrete in Compression
  • C513/C513M - 11(2019) Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • C514 - 04(2020) Specification for Nails for the Application of Gypsum Board
  • C515 - 13(2018) Specification for Chemical-Resistant Ceramic Tower Packings
  • C516 - 19 Specification for Vermiculite Loose Fill Thermal Insulation
  • C518 - 17 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • C520 - 15(2020) Test Methods for Density of Granular Loose Fill Insulations
  • C522 - 03(2016) Test Method for Airflow Resistance of Acoustical Materials
  • C530 - 13(2017) Specification for Structural Clay Nonloadbearing Screen Tile
  • C531 - 18 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • C533 - 17 Specification for Calcium Silicate Block and Pipe Thermal Insulation
  • C534/C534M - 20a Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
  • C535 - 16 Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • C536 - 83(2018) Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
  • C537 - 87(2018) Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
  • C538 - 83(2018) Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
  • C539 - 84(2016) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
  • C541/C541M - 98(2019) Specification for Linings for Asbestos-Cement Pipe
  • C542 - 05(2017) Specification for Lock-Strip Gaskets
  • C544 - 18 Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
  • C545 - 97(2018) Classification of Zircon Refractories
  • C547 - 19 Specification for Mineral Fiber Pipe Insulation
  • C549 - 18 Specification for Perlite Loose Fill Insulation
  • C550 - 15(2020) Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
  • C551/C551M - 07(2019) Specification for Asbestos-Cement Fiberboard Insulating Panels
  • C552 - 17e1 Specification for Cellular Glass Thermal Insulation
  • C553 - 13(2019) Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
  • C554 - 93(2020) Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
  • C556 - 16(2020) Test Method for Resistance of Overglaze Decorations to Attack by Detergents
  • C557 - 03(2017) Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
  • C559 - 16(2020) Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • C560 - 20 Test Methods for Chemical Analysis of Graphite
  • C561 - 16 Test Method for Ash in a Graphite Sample
  • C562 - 15 Test Method for Moisture in a Graphite Sample
  • C563 - 20 Guide for Approximation of Optimum SO3 in Hydraulic Cement
  • C564 - 20a Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
  • C565 - 15 Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
  • C566 - 19 Test Method for Total Evaporable Moisture Content of Aggregate by Drying
  • C566-SP - 19 Método de prueba estándar para calcular el contenido total de humedad evaporable de los agregados mediante secado
  • C566-POR - 19 Método de ensaio padrão para Teor total de umidade evaporável do agregado por secagem
  • C567/C567M - 19 Test Method for Determining Density of Structural Lightweight Concrete
  • C567/C567M-SP - 19 Método de prueba estándar para determinar la densidad del hormigón estructural liviano
  • C567/C567M-POR - 19 Método de ensaio padrão para Determinar a densidade do concreto leve estrutural
  • C568/C568M - 15 Specification for Limestone Dimension Stone
  • C577 - 19 Test Method for Permeability of Refractories
  • C578 - 19 Specification for Rigid, Cellular Polystyrene Thermal Insulation
  • C579 - 18 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • C580 - 18 Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • C581 - 20 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  • C582 - 09(2016) Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
  • C583 - 15 Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
  • C584 - 81(2016) Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
  • C585 - 10(2016) Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
  • C586 - 19 Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
  • C587 - 04(2018) Specification for Gypsum Veneer Plaster
  • C591 - 20 Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
  • C592 - 16 Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • C593 - 19 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
  • C595/C595M - 20 Specification for Blended Hydraulic Cements
  • C595/C595M-POR - 20 Especificação padrão para Cimentos hidráulicos misturados
  • C595/C595M-SP - 20 Especificación de estándar para cementos hidráulicos mezclados
  • C596 - 18 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • C597 - 16 Test Method for Pulse Velocity Through Concrete
  • C598 - 93(2019) Test Method for Annealing Point and Strain Point of Glass by Beam Bending
  • C602 - 20 Specification for Agricultural Liming Materials
  • C603 - 14(2019) Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
  • C604 - 18 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
  • C607 - 88(2016) Practice for Coking Large Shapes of Carbon-Bearing Materials
  • C609 - 20 Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
  • C610 - 17 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
  • C611 - 98(2016) Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
  • C612 - 14(2019) Specification for Mineral Fiber Block and Board Thermal Insulation
  • C613 - 19 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
  • C614 - 20 Test Method for Alkali Resistance of Porcelain Enamels
  • C615/C615M - 18e1 Specification for Granite Dimension Stone
  • C616/C616M - 15 Specification for Quartz-Based Dimension Stone
  • C617/C617M - 15 Practice for Capping Cylindrical Concrete Specimens
  • C617/C617M-SP - 15 Práctica estándar para la obturación de especímenes cilíndricos de hormigón
  • C617/C617M-POR - 15 Prática padrão para Capeamento de espécimes de concreto cilíndricos
  • C618 - 19 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  • C618-SP - 19 Especificación estándar para Ceniza volante de carbón y puzolana natural cruda o calcinada para su uso en hormigón
  • C618-RUS - 19 Стандартная спецификация на летучую золу угля и сырой или прокаленный природный пуццолан для использования в бетоне
  • C618-POR - 19 Especificação padrão para Cinza volante de carvão e pozolana natural pura ou calcinada para uso em concreto
  • C621 - 09(2018) Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
  • C623 - 92(2015) Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
  • C625 - 15 Practice for Reporting Irradiation Results on Graphite
  • C627 - 18 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
  • C629/C629M - 15 Specification for Slate Dimension Stone
  • C631 - 09(2020) Specification for Bonding Compounds for Interior Gypsum Plastering
  • C632 - 88(2016) Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
  • C633 - 13(2017) Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
  • C634 - 13e1 Terminology Relating to Building and Environmental Acoustics
  • C635/C635M - 17 Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
  • C636/C636M - 19 Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
  • C637 - 20 Specification for Aggregates for Radiation-Shielding Concrete
  • C638 - 20 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
  • C639 - 15(2020) Test Method for Rheological (Flow) Properties of Elastomeric Sealants
  • C641 - 17 Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
  • C642 - 13 Test Method for Density, Absorption, and Voids in Hardened Concrete
  • C645 - 18 Specification for Nonstructural Steel Framing Members
  • C647 - 19 Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
  • C648 - 20 Test Method for Breaking Strength of Ceramic Tile
  • C650 - 20 Test Method for Determination of Resistance to Chemical Substances
  • C651 - 20 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
  • C652 - 19b Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
  • C653 - 17 Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
  • C654 - 19 Specification for Porous Concrete Pipe
  • C654M - 19 Specification for Porous Concrete Pipe (Metric)
  • C655 - 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
  • C655M - 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
  • C656 - 17 Specification for Structural Insulating Board, Calcium Silicate
  • C657 - 19 Test Method for D-C Volume Resistivity of Glass
  • C658 - 98(2012) Specification for Chemical-Resistant Resin Grouts for Brick or Tile
  • C660 - 81(2020) Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
  • C661 - 15 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  • C662 - 16 Specification for Impervious Graphite Pipe and Threading
  • C664 - 10(2020) Test Methods for Thickness of Diffusion Coating
  • C665 - 17 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
  • C666/C666M - 15 Test Method for Resistance of Concrete to Rapid Freezing and Thawing
  • C667 - 17 Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
  • C670 - 15 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
  • C670-RUS - 15 СТАНДАРТНАЯ МЕТОДИКА ПОДГОТОВКИ ДАННЫХ ПО ПРЕЦИЗИОННОСТИ И СИСТЕМАТИЧЕСКОЙ ПОГРЕШНОСТИ ДЛЯ МЕТОДОВ ИСПЫТАНИЙ СТРОИТЕЛЬНЫХ МАТЕРИАЛОВ
  • C672/C672M - 12 Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
  • C673 - 97(2018) Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
  • C674 - 13(2018) Test Methods for Flexural Properties of Ceramic Whiteware Materials
  • C675 - 91(2016) Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
  • C676 - 04(2019) Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
  • C679 - 15 Test Method for Tack-Free Time of Elastomeric Sealants
  • C680 - 19 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
  • C681 - 14(2019) Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
  • C685/C685M - 17 Specification for Concrete Made by Volumetric Batching and Continuous Mixing
  • C685/C685M-SP - 17 Especificación estándar para hormigón preparado mediante dosificación volumétrica y mezcla continua
  • C685/C685M-POR - 17 Especificação padrão para Concreto feito por dosagem volumétrica e mistura contínua
  • C686 - 17 Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
  • C687 - 18 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
  • C688 - 14 Specification for Functional Additions for Use in Hydraulic Cements
  • C689 - 09(2019) Test Method for Modulus of Rupture of Unfired Clays
  • C690 - 09(2019) Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
  • C692 - 13(2018) Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • C693 - 93(2019) Test Method for Density of Glass by Buoyancy
  • C694 - 90a(2016) Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
  • C695 - 15(2020) Test Method for Compressive Strength of Carbon and Graphite
  • C696 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • C697 - 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • C698 - 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
  • C700 - 18 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
  • C702/C702M - 18 Practice for Reducing Samples of Aggregate to Testing Size
  • C702/C702M-SP - 18 Práctica estándar para reducir muestras de agregado a tamaño para pruebas
  • C702/C702M-POR - 18 Prática padrão para Reduzir amostras de agregados para tamanho de ensaio
  • C703 - 72(2016) Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
  • C704/C704M - 15e1 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
  • C706 - 19 Specification for Limestone for Animal Feed Use
  • C708 - 16 Specification for Nuclear-Grade Beryllium Oxide Powder
  • C711 - 14 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
  • C712 - 14 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
  • C712-RU-RU - 14 Стандартный метод испытания для определения образования пузырей однокомпонентных эластомерных герметиков с испаряющимся растворителем
  • C714 - 17 Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
  • C715 - 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • C716 - 06(2020) Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
  • C717 - 19 Terminology of Building Seals and Sealants
  • C719 - 14(2019) Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
  • C721 - 20 Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
  • C722 - 18 Specification for Chemical-Resistant Monolithic Floor Surfacings
  • C723 - 98(2012) Practice for Chemical-Resistant Resin Grouts for Brick or Tile
  • C724 - 91(2020) Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
  • C726 - 17 Specification for Mineral Wool Roof Insulation Board
  • C727 - 19 Practice for Installation and Use of Reflective Insulation in Building Constructions
  • C728 - 17a Specification for Perlite Thermal Insulation Board
  • C729 - 11(2016) Test Method for Density of Glass by the Sink-Float Comparator
  • C730 - 98(2013) Test Method for Knoop Indentation Hardness of Glass
  • C731 - 15 Test Method for Extrudability, After Package Aging, of Latex Sealants
  • C731-RUS - 15 Стандартный метод определения шприцуемости латексных герметиков после циклического старения
  • C732 - 17 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
  • C734 - 15(2019) Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
  • C735 - 04(2019) Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
  • C736 - 12(2017) Test Method for Extension-Recovery and Adhesion of Latex Sealants
  • C737 - 13 Specification for Limestone for Dusting of Coal Mines
  • C738 - 94(2020) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
  • C739 - 17 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
  • C740/C740M - 13(2019) Guide for Evacuated Reflective Insulation In Cryogenic Service
  • C743 - 87(2018) Test Method for Continuity of Porcelain Enamel Coatings
  • C744 - 16 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
  • C747 - 16 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
  • C748 - 20 Test Method for Rockwell Hardness of Graphite Materials
  • C749 - 15(2020) Test Method for Tensile Stress-Strain of Carbon and Graphite
  • C750 - 18 Specification for Nuclear-Grade Boron Carbide Powder
  • C751 - 20 Specification for Nuclear-Grade Boron Carbide Pellets
  • C752 - 18 Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
  • C753 - 16a Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
  • C754 - 20 Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
  • C755 - 20 Practice for Selection of Water Vapor Retarders for Thermal Insulation
  • C756 - 87(2016) Test Method for Cleanability of Surface Finishes
  • C757 - 16e1 Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors
  • C758 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
  • C759 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
  • C760 - 90(2020) Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
  • C761 - 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • C764 - 19 Specification for Mineral Fiber Loose-Fill Thermal Insulation
  • C765 - 97(2015) Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
  • C767 - 20 Test Method for Thermal Conductivity of Carbon Refractories
  • C769 - 15(2020)e1 Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
  • C770 - 16(2020) Test Method for Measurement of Glass Stress—Optical Coefficient
  • C771 - 14(2019) Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
  • C772 - 03(2019) Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
  • C773 - 88(2020) Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
  • C774 - 88(2016) Test Method for Yield Strength of Enameling Steels After Straining and Firing
  • C776 - 17 Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors
  • C777 - 04(2019) Test Method for Sulfide Resistance of Ceramic Decorations on Glass
  • C778 - 17 Specification for Standard Sand
  • C779/C779M - 19 Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
  • C780 - 20 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • C781 - 20 Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
  • C782 - 13(2018) Test Method for Softness of Preformed Tape Sealants
  • C783 - 85(2020) Practice for Core Sampling of Graphite Electrodes
  • C784 - 20 Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
  • C785 - 08(2015) Specification for Nuclear-Grade Aluminum Oxide Pellets
  • C786/C786M - 17 Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
  • C787 - 20 Specification for Uranium Hexafluoride for Enrichment
  • C788 - 03(2015) Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
  • C791 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • C792 - 15(2020) Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
  • C793 - 05(2017) Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
  • C794 - 18 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
  • C795 - 08(2018) Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
  • C796/C796M - 19 Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • C799 - 19 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
  • C800 - 19 Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
  • C802 - 14 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  • C803/C803M - 18 Test Method for Penetration Resistance of Hardened Concrete
  • C805/C805M - 18 Test Method for Rebound Number of Hardened Concrete
  • C806 - 18 Test Method for Restrained Expansion of Expansive Cement Mortar
  • C807 - 20 Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
  • C808 - 75(2016) Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
  • C809 - 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
  • C810 - 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
  • C813 - 20 Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
  • C816 - 15(2020)e1 Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
  • C821 - 14 Specification for Lime for Use with Pozzolans
  • C822 - 20 Terminology Relating to Concrete Pipe and Related Products
  • C823/C823M - 12(2017) Practice for Examination and Sampling of Hardened Concrete in Constructions
  • C824 - 91(2020) Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method
  • C825 - 19 Specification for Precast Concrete Barriers
  • C827/C827M - 16 Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
  • C828 - 11(2016) Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • C829 - 81(2015) Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
  • C830 - 00(2016) Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
  • C831 - 18 Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
  • C832 - 00(2015) Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
  • C833 - 17 Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
  • C834 - 17 Specification for Latex Sealants
  • C835 - 06(2020) Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
  • C836/C836M - 18 Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
  • C837 - 09(2019) Test Method for Methylene Blue Index of Clay
  • C838 - 16 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
  • C839 - 82(2020) Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
  • C840 - 20 Specification for Application and Finishing of Gypsum Board
  • C841 - 03(2018) Specification for Installation of Interior Lathing and Furring
  • C842 - 05(2015) Specification for Application of Interior Gypsum Plaster
  • C843 - 17 Specification for Application of Gypsum Veneer Plaster
  • C844 - 15 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
  • C845/C845M - 18 Specification for Expansive Hydraulic Cement
  • C845/C845M-SP - 18
  • C845/C845M-POR - 18 Especificação padrão para Cimento hidráulico expansivo
  • C846 - 16 Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
  • C847 - 18 Specification for Metal Lath
  • C848 - 88(2020) Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
  • C849 - 88(2020) Test Method for Knoop Indentation Hardness of Ceramic Whitewares
  • C852/C852M - 17 Guide for Design Criteria for Plutonium Gloveboxes
  • C856/C856M - 20 Practice for Petrographic Examination of Hardened Concrete
  • C857 - 19 Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
  • C858 - 19 Specification for Underground Precast Concrete Utility Structures
  • C859 - 14b Terminology Relating to Nuclear Materials
  • C860 - 15(2019) Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
  • C861 - 93(2020) Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
  • C862 - 16(2020) Practice for Preparing Refractory Concrete Specimens by Casting
  • C863 - 00(2016) Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
  • C864 - 05(2019) Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
  • C865 - 17 Practice for Firing Refractory Concrete Specimens
  • C866 - 11(2016) Test Method for Filtration Rate of Ceramic Whiteware Clays
  • C867 - 94(2014) Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
  • C869/C869M - 11(2016) Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
  • C870 - 11(2017) Practice for Conditioning of Thermal Insulating Materials
  • C871 - 18 Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • C872 - 10(2015) Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
  • C873/C873M - 15 Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
  • C874 - 20 Test Method for Rotary Slag Testing of Refractory Materials
  • C876 - 15 Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
  • C877 - 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
  • C877M - 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
  • C878/C878M - 14a Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
  • C879 - 03(2019) Test Methods for Release Papers Used with Preformed Tape Sealants
  • C880/C880M - 18 Test Method for Flexural Strength of Dimension Stone
  • C881/C881M - 20a Specification for Epoxy-Resin-Base Bonding Systems for Concrete
  • C882/C882M - 20 Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
  • C884/C884M - 16 Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
  • C885 - 87(2020) Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
  • C886 - 98(2015) Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
  • C887 - 20 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
  • C888 - 18 Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • C889 - 18 Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • C890 - 19 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
  • C891 - 20 Practice for Installation of Underground Precast Concrete Utility Structures
  • C892 - 19 Specification for High-Temperature Fiber Blanket Thermal Insulation
  • C895 - 87(2019) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
  • C896 - 20e1 Terminology Relating to Clay Products
  • C897 - 15(2020) Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
  • C898/C898M - 09(2017) Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
  • C899 - 79(2018) Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
  • C900 - 19 Test Method for Pullout Strength of Hardened Concrete
  • C901 - 18 Specification for Prefabricated Masonry Panels
  • C902 - 20 Specification for Pedestrian and Light Traffic Paving Brick
  • C903 - 15(2020) Practice for Preparing Refractory Specimens by Cold Gunning
  • C904 - 01(2018) Terminology Relating to Chemical-Resistant Nonmetallic Materials
  • C905 - 01(2012) Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • C907 - 17(2018) Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  • C908 - 15 Test Method for Yield Strength of Preformed Tape Sealants
  • C909 - 18 Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
  • C910 - 16 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
  • C911 - 19 Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
  • C912 - 17 Practice for Designing a Process for Cleaning Technical Glasses
  • C913 - 18 Specification for Precast Concrete Water and Wastewater Structures
  • C914 - 09(2015) Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • C915 - 79(2018) Specification for Precast Reinforced Concrete Crib Wall Members
  • C916 - 20 Specification for Adhesives for Duct Thermal Insulation
  • C917/C917M - 18 Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
  • C918/C918M - 20 Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
  • C919 - 19 Practice for Use of Sealants in Acoustical Applications
  • C920 - 18 Specification for Elastomeric Joint Sealants
  • C921 - 10(2015) Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
  • C922 - 14 Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • C923/C923M - 20 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
  • C925 - 09(2019) Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
  • C926 - 20b Specification for Application of Portland Cement-Based Plaster
  • C927 - 80(2019)e1 Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
  • C928/C928M - 20a Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
  • C929 - 14(2019) Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
  • C930 - 19 Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
  • C932 - 06(2019) Specification for Surface-Applied Bonding Compounds for Exterior Plastering
  • C933 - 18 Specification for Welded Wire Lath
  • C935 - 19 Specification for General Requirements for Prestressed Concrete Poles Statically Cast
  • C936/C936M - 20 Specification for Solid Concrete Interlocking Paving Units
  • C937 - 16 Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
  • C938 - 19 Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
  • C939/C939M - 16a Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
  • C940 - 16 Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • C941 - 16 Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
  • C942 - 15 Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • C943 - 17 Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
  • C944/C944M - 19 Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
  • C945 - 05(2017) Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
  • C946 - 18 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
  • C947 - 03(2016) Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
  • C948 - 81(2016) Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
  • C949 - 80(2020) Test Method for Porosity in Vitreous Whitewares by Dye Penetration
  • C950/C950M - 08(2017) Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
  • C953 - 17 Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • C954 - 18 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
  • C955 - 18e1 Specification for Cold-Formed Steel Structural Framing Members
  • C956 - 04(2019) Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
  • C957/C957M - 17 Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  • C958 - 92(2014) Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
  • C961 - 15 Test Method for Lap Shear Strength of Sealants
  • C963 - 00(2017) Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
  • C964 - 20 Guide for Lock-Strip Gasket Glazing
  • C965 - 96(2017) Practice for Measuring Viscosity of Glass Above the Softening Point
  • C967 - 20 Specification for Uranium Ore Concentrate
  • C968 - 19 Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • C969M - 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
  • C969 - 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
  • C972 - 18 Test Method for Compression-Recovery of Tape Sealant
  • C973 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
  • C974 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
  • C975 - 87(2020) Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
  • C977 - 18 Specification for Quicklime and Hydrated Lime for Soil Stabilization
  • C978 - 04(2019) Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
  • C979/C979M - 16 Specification for Pigments for Integrally Colored Concrete
  • C980 - 17 Specification for Industrial Chimney Lining Brick
  • C981 - 20 Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
  • C985M - 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
  • C985 - 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
  • C987 - 10(2019) Test Method for Vapor Attack on Refractories for Furnace Superstructures
  • C989/C989M - 18a Specification for Slag Cement for Use in Concrete and Mortars
  • C989/C989M-SP - 18a Especificación de estándar para cemento de escoria para uso en hormigón y morteros
  • C989/C989M-POR - 18a Especificação padrão para Cimento de escórias para uso em concreto e argamassas
  • C990 - 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
  • C990M - 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
  • C991 - 16 Specification for Flexible Fibrous Glass Insulation for Metal Buildings
  • C992 - 20a Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
  • C993 - 97(2012) Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
  • C996 - 20 Specification for Uranium Hexafluoride Enriched to Less Than 5 %  235U
  • C998 - 17 Practice for Sampling Surface Soil for Radionuclides
  • C999 - 17 Practice for Soil Sample Preparation for the Determination of Radionuclides

C1000-C1999Edit

  • C1000 - 19 Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
  • C1001 - 19 Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
  • C1002 - 20 Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
  • C1005 - 20 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
  • C1006/C1006M - 20a Test Method for Splitting Tensile Strength of Masonry Units
  • C1007 - 20 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
  • C1009 - 13a Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
  • C1012/C1012M - 18b Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
  • C1014 - 17 Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
  • C1015 - 17 Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
  • C1016 - 14 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
  • C1017/C1017M - 13e1 Specification for Chemical Admixtures for Use in Producing Flowing Concrete
  • C1017/C1017M-SP - 13e1 Especificación Normalizada para Aditivos Químicos para Uso en la Producción de Concreto Fluido
  • C1017/C1017M-POR - 13e1 Especificação padrão para Aditivos químicos para uso na produção de concreto fluido
  • C1019 - 20 Test Method for Sampling and Testing Grout for Masonry
  • C1021 - 08(2019) Practice for Laboratories Engaged in Testing of Building Sealants
  • C1022 - 17 Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
  • C1023 - 10(2018) Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
  • C1025 - 15(2020) Test Method for Modulus of Rupture in Bending of Electrode Graphite
  • C1026 - 13(2018) Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
  • C1027 - 19 Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
  • C1029 - 20 Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
  • C1030 - 10(2018) Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
  • C1031 - 11(2016) Specification for Nuclear-Grade Aluminum Oxide Powder
  • C1032 - 18 Specification for Woven Wire Plaster Base
  • C1036 - 16 Specification for Flat Glass
  • C1037 - 16 Practice for Inspection of Underground Precast Concrete Utility Structures
  • C1038/C1038M - 19 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
  • C1039 - 85(2020)e1 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
  • C1040/C1040M - 16a Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
  • C1040/C1040M-RU-RU - 16a Стандартные методы испытания для определения плотности уложенного в конструкцию незатвердевшего и затвердевшего бетона, включая бетон, уплотненный катком, с использованием ядерных методов
  • C1043 - 19 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
  • C1044 - 16(2020) Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
  • C1045 - 19 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
  • C1046 - 95(2013) Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • C1047 - 19 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
  • C1048 - 18 Specification for Heat-Strengthened and Fully Tempered Flat Glass
  • C1052 - 20 Practice for Bulk Sampling of Liquid Uranium Hexafluoride
  • C1054 - 18 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
  • C1055 - 20 Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
  • C1057 - 17 Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
  • C1058/C1058M - 10(2015) Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
  • C1059/C1059M - 13 Specification for Latex Agents for Bonding Fresh To Hardened Concrete
  • C1060 - 11a(2015) Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
  • C1062 - 00(2014) Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
  • C1063 - 20a Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
  • C1064/C1064M - 17 Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C1064/C1064M-SP - 17 Método de prueba estándar para la determinación de la temperatura del hormigón de cemento hidráulico recién mezclado
  • C1064/C1064M-POR - 17 Método de ensaio padrão para Temperatura de concreto de cimento hidráulico recém misturado
  • C1065 - 08(2015) Specification for Nuclear-Grade Zirconium Oxide Powder
  • C1066 - 09(2015) Specification for Nuclear Grade Zirconium Oxide Pellets
  • C1067 - 20 Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
  • C1068 - 15 Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
  • C1069 - 09(2014) Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
  • C1070 - 01(2020) Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
  • C1071 - 19 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • C1072 - 19 Test Methods for Measurement of Masonry Flexural Bond Strength
  • C1073 - 18 Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali
  • C1074 - 19e1 Practice for Estimating Concrete Strength by the Maturity Method
  • C1075 - 17 Practices for Sampling Uranium-Ore Concentrate
  • C1076 - 09(2015) Specification for Nuclear Grade Hafnium Oxide Pellets
  • C1077 - 17 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  • C1077-SP - 17 Práctica estándar para los organismos de pruebas de hormigón y agregados de hormigón para uso en la construcción y criterios de evaluación de los organismos de pruebas
  • C1077-POR - 17 Prática padrão para Centros que ensaiem concreto e agregados de concreto para uso em construções e critérios para avaliação de centros de ensaios
  • C1083 - 06(2020)e1 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
  • C1084 - 19 Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
  • C1086 - 20 Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
  • C1087 - 16 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
  • C1088 - 20 Specification for Thin Veneer Brick Units Made From Clay or Shale
  • C1089 - 19 Specification for Spun Cast Prestressed Concrete Poles
  • C1090/C1090M - 15 Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
  • C1091 - 03a(2018) Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
  • C1093 - 19 Practice for Accreditation of Testing Agencies for Masonry
  • C1096/C1096M - 07(2019) Test Method for Determination of Wood Fiber in Asbestos Cement
  • C1097 - 19 Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
  • C1098 - 08(2015) Specification for Nuclear-Grade Hafnium Oxide Powder
  • C1099 - 07(2019) Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
  • C1101/C1101M - 06(2017) Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
  • C1103M - 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
  • C1103 - 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
  • C1104/C1104M - 19 Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
  • C1105 - 08a(2016) Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
  • C1106 - 00(2012) Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
  • C1107/C1107M - 20 Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
  • C1108 - 17 Test Method for Plutonium by Controlled-Potential Coulometry
  • C1109 - 10(2015) Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • C1111 - 10(2020) Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • C1113/C1113M - 09(2019) Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
  • C1114 - 06(2019) Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
  • C1115 - 17 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
  • C1116/C1116M - 10a(2015) Specification for Fiber-Reinforced Concrete
  • C1119/C1119M - 90(2015) Test Method for Vacuum Drainage of Asbestos-Cement Mixes
  • C1120/C1120M - 98(2019) Test Method for Wash Test of Asbestos
  • C1121/C1121M - 04(2015) Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
  • C1122/C1122M - 90(2015) Test Method for Wet Volume of Asbestos
  • C1123/C1123M - 90(2015) Test Method for Compressibility and Recovery of Asbestos
  • C1124/C1124M - 90(2015) Test Method for Kerosene Retention of Asbestos
  • C1125 - 89(2015) Test Method for Penetration Index of Asbestos
  • C1126 - 19 Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
  • C1127/C1127M - 15 Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
  • C1128 - 18 Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
  • C1129 - 17 Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
  • C1130 - 17 Practice for Calibration of Thin Heat Flux Transducers
  • C1131 - 20 Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
  • C1133/C1133M - 10(2018) Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
  • C1134 - 17 Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • C1135 - 19 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
  • C1136 - 17a Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
  • C1138M - 19 Test Method for Abrasion Resistance of Concrete (Underwater Method)
  • C1140/C1140M - 11(2019) Practice for Preparing and Testing Specimens from Shotcrete Test Panels
  • C1141/C1141M - 15 Specification for Admixtures for Shotcrete
  • C1145 - 19 Terminology of Advanced Ceramics
  • C1146 - 09(2018) Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
  • C1147 - 14 Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
  • C1149 - 17 Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
  • C1152/C1152M - 20 Test Method for Acid-Soluble Chloride in Mortar and Concrete
  • C1153 - 10(2015) Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • C1154 - 06(2016) Terminology for Non-Asbestos Fiber-Reinforced Cement Products
  • C1155 - 95(2013) Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
  • C1156 - 18 Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
  • C1157/C1157M - 20 Performance Specification for Hydraulic Cement
  • C1157/C1157M-SP - 20 Especificación de desempeño estándar para cemento hidráulico
  • C1157/C1157M-POR - 20 Especificação de desempenho padrão para Cimento hidráulico
  • C1159 - 98(2012) Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
  • C1160 - 97(2012) Specification for Chemical-Resistant Carbon Brick
  • C1161 - 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
  • C1162/C1162M - 90(2015) Test Method for Loose Density of Asbestos
  • C1163 - 14 Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
  • C1164 - 14 Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
  • C1165 - 17 Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
  • C1166 - 06(2016) Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
  • C1167 - 11(2017) Specification for Clay Roof Tiles
  • C1168 - 15 Practice for Preparation and Dissolution of Plutonium Materials for Analysis
  • C1169 - 97(2012) Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
  • C1170/C1170M - 20 Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
  • C1171 - 16 Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
  • C1172 - 19 Specification for Laminated Architectural Flat Glass
  • C1173 - 18 Specification for Flexible Transition Couplings for Underground Piping Systems
  • C1174 - 20 Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
  • C1176/C1176M - 20 Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
  • C1177/C1177M - 17 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
  • C1178/C1178M - 18 Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
  • C1179 - 15 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
  • C1180 - 19 Terminology of Mortar and Grout for Unit Masonry
  • C1181/C1181M - 17 Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
  • C1182 - 09(2019) Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
  • C1183/C1183M - 13(2018) Test Method for Extrusion Rate of Elastomeric Sealants
  • C1184 - 18e1 Specification for Structural Silicone Sealants
  • C1185 - 08(2016) Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • C1186 - 08(2016) Specification for Flat Fiber-Cement Sheets
  • C1187 - 20a Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
  • C1189 - 11(2018) Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
  • C1190 - 18 Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
  • C1193 - 16 Guide for Use of Joint Sealants
  • C1194 - 19 Test Method for Compressive Strength of Architectural Cast Stone
  • C1195 - 19a Test Method for Absorption of Architectural Cast Stone
  • C1196 - 20 Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
  • C1197 - 20 Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
  • C1198 - 20 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
  • C1199 - 14 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
  • C1201/C1201M - 20 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
  • C1202 - 19 Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
  • C1203 - 04(2019) Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
  • C1204 - 14 Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
  • C1205 - 07(2012) Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
  • C1207 - 10(2018) Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
  • C1208/C1208M - 18 Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
  • C1210 - 18 Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
  • C1211 - 18 Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
  • C1214M - 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
  • C1214 - 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
  • C1215 - 18 Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
  • C1216/C1216M - 13 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
  • C1216/C1216M-RU-RU - 13 Стандартный метод испытания на адгезию и когезию однокомпонентных эластомерных герметиков с испаряющимся растворителем
  • C1217 - 00(2020) Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
  • C1218/C1218M - 20 Test Method for Water-Soluble Chloride in Mortar and Concrete
  • C1218/C1218M-SP - 20 Método de prueba estándar para cloruro soluble en agua en mortero y hormigón
  • C1218/C1218M-POR - 20 Método de ensaio padrão para Cloreto solúvel em água em argamassa e concreto
  • C1220 - 17 Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
  • C1221 - 10(2018) Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
  • C1222 - 19a Practice for Evaluation of Laboratories Testing Hydraulic Cement
  • C1223 - 19 Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
  • C1224 - 15(2020) Specification for Reflective Insulation for Building Applications
  • C1225 - 08(2016) Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
  • C1227 - 20 Specification for Precast Concrete Septic Tanks
  • C1228 - 96(2015) Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
  • C1229 - 94(2015) Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
  • C1230 - 96(2015) Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
  • C1231/C1231M - 15 Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
  • C1231/C1231M-SP - 15 Práctica estándar para el uso de cabezales sin adhesión en la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón endurecido
  • C1231/C1231M-POR - 15 Prática padrão para Uso de tampas não acopladas na determinação de resistência à compressão de espécimes de concreto cilíndrico endurecido
  • C1232 - 20 Terminology for Masonry
  • C1233 - 15 Practice for Determining Equivalent Boron Contents of Nuclear Materials
  • C1234 - 11(2019) Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
  • C1238 - 97(2012) Guide for Installation of Walk-Through Metal Detectors
  • C1239 - 13(2018) Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
  • C1240 - 20 Specification for Silica Fume Used in Cementitious Mixtures
  • C1240-SP - 20 Especificación de estándar para humo de sílice utilizado en mezclas cementantes
  • C1240-POR - 20 Especificação padrão para Sílica ativa usada em misturas cimentícias
  • C1241 - 14 Test Method for Volume Shrinkage of Latex Sealants During Cure
  • C1242 - 20 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
  • C1243 - 93(2015)e2 Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
  • C1244/C1244M - 20 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
  • C1246 - 17 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
  • C1247 - 20 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
  • C1248 - 18 Test Method for Staining of Porous Substrate by Joint Sealants
  • C1249 - 18 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
  • C1252 - 17 Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • C1253 - 14(2019) Test Method for Determining the Outgassing Potential of Sealant Backing
  • C1254 - 18 Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
  • C1255 - 18 Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
  • C1256 - 93(2019) Practice for Interpreting Glass Fracture Surface Features
  • C1257 - 15 Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
  • C1257-RU-RU - 15 Стандартный метод испытания на ускоренное старение в атмосферных условиях герметиков с испаряющимся растворителем
  • C1258 - 19 Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
  • C1259 - 15 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
  • C1260 - 14 Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
  • C1261 - 13(2017)e1 Specification for Firebox Brick for Residential Fireplaces
  • C1262/C1262M - 18 Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
  • C1263 - 95(2015) Test Method for Thermal Integrity of Flexible Water Vapor Retarders
  • C1264 - 19 Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
  • C1265 - 17 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
  • C1266 - 17 Test Method for Flow Characteristics of Preformed Tape Sealants
  • C1267 - 17 Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
  • C1268 - 15 Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
  • C1269 - 97(2012) Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
  • C1270 - 97(2012) Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
  • C1271 - 99(2020) Test Method for X-ray Spectrometric Analysis of Lime and Limestone
  • C1272 - 17 Specification for Heavy Vehicular Paving Brick
  • C1273 - 18 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
  • C1274 - 12(2020) Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
  • C1275 - 18 Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
  • C1277 - 20 Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
  • C1278/C1278M - 17 Specification for Fiber-Reinforced Gypsum Panel
  • C1279 - 13(2019) Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
  • C1280 - 18 Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
  • C1281 - 16 Specification for Preformed Tape Sealants for Glazing Applications
  • C1283 - 15 Practice for Installing Clay Flue Lining
  • C1284 - 18 Practice for Electrodeposition of the Actinides for Alpha Spectrometry
  • C1285 - 14 Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
  • C1287 - 18 Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
  • C1288 - 17 Specification for Fiber-Cement Interior Substrate Sheets
  • C1289 - 20 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
  • C1290 - 16 Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
  • C1291 - 18 Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
  • C1292 - 16 Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
  • C1293 - 20a Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
  • C1294 - 20 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
  • C1295 - 15 Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
  • C1297 - 18 Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
  • C1298 - 95(2013) Guide for Design and Construction of Brick Liners for Industrial Chimneys
  • C1300 - 95(2020) Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
  • C1301 - 95(2014) Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
  • C1303/C1303M - 19 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
  • C1304 - 18 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
  • C1305/C1305M - 16 Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
  • C1306/C1306M - 08(2016)e1 Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
  • C1307 - 15 Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
  • C1308 - 08(2017) Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
  • C1309 - 97(2012) Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
  • C1311 - 14 Specification for Solvent Release Sealants
  • C1312 - 97(2012) Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
  • C1313/C1313M - 13(2019) Specification for Sheet Radiant Barriers for Building Construction Applications
  • C1314 - 18 Test Method for Compressive Strength of Masonry Prisms
  • C1315 - 19 Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
  • C1316 - 08(2017) Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
  • C1318 - 15a(2020) Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
  • C1319 - 17 Specification for Concrete Grid Paving Units
  • C1320 - 20 Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
  • C1321 - 15(2020) Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
  • C1322 - 15(2019) Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
  • C1323 - 16 Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
  • C1324 - 20a Test Method for Examination and Analysis of Hardened Masonry Mortar
  • C1325 - 19 Specification for Fiber-Mat Reinforced Cementitious Backer Units
  • C1325-SP - 19 Especificación de estándar para placas de cemento reforzadas con malla de fibra
  • C1325-POR - 19 Especificação padrão para Placas cimentícias reforçadas com tecido de fibras
  • C1326 - 13(2018) Test Method for Knoop Indentation Hardness of Advanced Ceramics
  • C1327 - 15(2019) Test Method for Vickers Indentation Hardness of Advanced Ceramics
  • C1328/C1328M - 19 Specification for Plastic (Stucco) Cement
  • C1329/C1329M - 16a Specification for Mortar Cement
  • C1330 - 18 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
  • C1331 - 18 Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
  • C1332 - 18 Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
  • C1334 - 05(2016)e1 Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
  • C1335 - 12(2017) Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
  • C1337 - 17 Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
  • C1338 - 19 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
  • C1339/C1339M - 18 Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
  • C1340/C1340M - 10(2015) Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
  • C1341 - 13(2018) Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
  • C1343 - 16 Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
  • C1346 - 19 Practice for Dissolution of UF6 from P-10 Tubes
  • C1347 - 08(2014)e1 Practice for Preparation and Dissolution of Uranium Materials for Analysis
  • C1349 - 17 Specification for Architectural Flat Glass Clad Polycarbonate
  • C1350M - 96(2019) Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
  • C1351M - 96(2017) Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
  • C1352/C1352M - 15 Test Method for Flexural Modulus of Elasticity of Dimension Stone
  • C1353/C1353M - 20e1 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
  • C1354/C1354M - 15 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
  • C1355/C1355M - 96(2020) Specification for Glass Fiber Reinforced Gypsum Composites
  • C1356 - 07(2020) Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
  • C1358 - 18 Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
  • C1359 - 18e1 Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
  • C1360 - 17 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
  • C1361 - 10(2019) Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
  • C1363 - 19 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
  • C1364 - 19 Specification for Architectural Cast Stone
  • C1365 - 18 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • C1366 - 19 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
  • C1367 - 19 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
  • C1368 - 18 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
  • C1369 - 19 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
  • C1370 - 00(2012) Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
  • C1371 - 15 Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
  • C1372 - 17 Specification for Dry-Cast Segmental Retaining Wall Units
  • C1373/C1373M - 11(2017) Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
  • C1374 - 18 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
  • C1375 - 00(2020) Guide for Substrates Used in Testing Building Seals and Sealants
  • C1376 - 15 Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
  • C1378 - 20 Test Method for Determination of Resistance to Staining
  • C1381/C1381M - 97(2018) Specification for Molded Glass Fiber Reinforced Gypsum Parts
  • C1382 - 16 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
  • C1383 - 15 Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
  • C1384 - 18e1 Specification for Admixtures for Masonry Mortars
  • C1385/C1385M - 10(2017) Practice for Sampling Materials for Shotcrete
  • C1387 - 14 Guide for the Determination of Technetium-99 in Soil
  • C1392 - 20 Guide for Evaluating Failure of Structural Sealant Glazing
  • C1393 - 19 Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
  • C1394 - 20 Guide for In-Situ Structural Silicone Glazing Evaluation
  • C1396/C1396M - 17 Specification for Gypsum Board
  • C1397 - 13(2019) Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
  • C1399/C1399M - 10(2015) Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
  • C1400 - 11(2017) Guide for Reduction of Efflorescence Potential in New Masonry Walls
  • C1401 - 14 Guide for Structural Sealant Glazing
  • C1402 - 17 Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
  • C1403 - 15 Test Method for Rate of Water Absorption of Masonry Mortars
  • C1405 - 20a Specification for Glazed Brick (Single Fired, Brick Units)
  • C1407 - 98(2016) Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
  • C1408 - 16 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
  • C1409 - 12(2018) Guide for Measuring and Estimating Quantities of Insulated Piping and Components
  • C1410 - 17 Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
  • C1411 - 20 Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
  • C1413 - 18 Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
  • C1415 - 18 Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry
  • C1417 - 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
  • C1417M - 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
  • C1419 - 14(2020) Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
  • C1421 - 18 Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
  • C1422/C1422M - 20a Specification for Chemically Strengthened Flat Glass
  • C1423 - 16 Guide for Selecting Jacketing Materials for Thermal Insulation
  • C1424 - 15(2019) Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
  • C1425 - 19 Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
  • C1426 - 14(2020) Practices for Verification and Calibration of Polarimeters
  • C1427 - 16 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
  • C1428 - 18 Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
  • C1429 - 99(2014) Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • C1430 - 18 Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
  • C1431 - 99(2018) Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
  • C1432 - 15 Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • C1433M - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
  • C1433 - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
  • C1435/C1435M - 20 Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
  • C1436 - 13 Specification for Materials for Shotcrete
  • C1437 - 20 Test Method for Flow of Hydraulic Cement Mortar
  • C1438 - 13(2017) Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • C1439 - 19 Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • C1440 - 17 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
  • C1441 - 13 Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • C1441-RUS - 13 Стандартный метод анализа холодильного агента 114 и другихуглеродсодержащих и фторсодержащих соединений в гексафториде урана с помощью инфракрасной спектроскопии с Фурье-преобразованием (ИКСФП)
  • C1442 - 14 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
  • C1443 - 99(2016) Specification for Glasses, Portlight, Circular, Fully Tempered
  • C1445 - 13(2018) Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
  • C1446 - 19 Test Method for Measuring Consistency of Self-Flowing Castable Refractories
  • C1447/C1447M - 04(2019) Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
  • C1448/C1448M - 05(2019) Specification for Non-Asbestos Fiber-Cement Conduit
  • C1449/C1449M - 05a(2019) Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
  • C1450/C1450M - 04(2019) Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
  • C1451 - 18 Practice for Determining Variability of Concrete-Making Materials From a Single Source
  • C1453 - 19 Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
  • C1455 - 14e1 Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
  • C1456 - 13(2018) Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
  • C1457 - 18 Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • C1458 - 16 Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
  • C1459 - 04(2019) Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
  • C1460 - 20 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
  • C1461 - 08(2017) Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
  • C1462 - 00(2013) Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U
  • C1463 - 19 Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
  • C1464 - 16 Specification for Bent Glass
  • C1465 - 08(2019) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
  • C1466 - 00(2020) Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
  • C1467/C1467M - 00(2016) Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
  • C1468 - 19a Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
  • C1469 - 10(2015) Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
  • C1470 - 20 Guide for Testing the Thermal Properties of Advanced Ceramics
  • C1471/C1471M - 05(2014)e1 Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
  • C1472 - 16e1 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
  • C1473 - 19 Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
  • C1474 - 19 Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
  • C1475 - 17 Guide for Determination of Neptunium-237 in Soil
  • C1477 - 19 Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
  • C1478/C1478M - 20 Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
  • C1479 - 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
  • C1479M - 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
  • C1480/C1480M - 07(2012) Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  • C1481 - 12(2017) Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
  • C1482 - 17 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
  • C1483/C1483M - 17 Specification for Exterior Solar Radiation Control Coatings on Buildings
  • C1484 - 10(2018) Specification for Vacuum Insulation Panels
  • C1485 - 19 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
  • C1486 - 18 Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
  • C1487 - 19 Guide for Remedying Structural Silicone Glazing
  • C1489 - 15 Specification for Lime Putty for Structural Purposes
  • C1490 - 14 Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
  • C1491 - 19 Specification for Concrete Roof Pavers
  • C1492 - 03(2016) Specification for Concrete Roof Tile
  • C1493 - 19 Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
  • C1494 - 13(2018) Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
  • C1495 - 16 Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
  • C1496 - 18 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
  • C1497 - 16 Specification for Cellulosic Fiber Stabilized Thermal Insulation
  • C1498 - 04a(2016) Test Method for Hygroscopic Sorption Isotherms of Building Materials
  • C1499 - 19 Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
  • C1500 - 08(2017) Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
  • C1501 - 19 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
  • C1502 - 16 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
  • C1503 - 18 Specification for Silvered Flat Glass Mirror
  • C1504 - 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
  • C1504M - 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
  • C1505 - 15 Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
  • C1506 - 17 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • C1507 - 12 Test Method for Radiochemical Determination of Strontium-90 in Soil
  • C1508 - 18 Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
  • C1510 - 01(2020) Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
  • C1511 - 15 Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
  • C1512 - 10(2020) Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
  • C1513 - 18 Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
  • C1514 - 08(2017) Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
  • C1515 - 20 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
  • C1516 - 05(2017) Practice for Application of Direct-Applied Exterior Finish Systems
  • C1517 - 16 Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
  • C1518 - 16 Specification for Precured Elastomeric Silicone Joint Sealants
  • C1519 - 10(2017) Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
  • C1520 - 20 Guide for Paintability of Latex Sealants
  • C1521 - 19(2020) Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
  • C1522 - 05(2013) Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
  • C1523 - 17 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
  • C1524 - 19 Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
  • C1525 - 18 Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
  • C1526 - 19 Specification for Serpentine Dimension Stone
  • C1527/C1527M - 11(2018) Specification for Travertine Dimension Stone
  • C1528/C1528M - 20 Guide for Selection of Dimension Stone
  • C1529 - 19 Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
  • C1530/C1530M - 04(2019) Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
  • C1531 - 16 Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
  • C1532/C1532M - 20 Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
  • C1533 - 15 Guide for General Design Considerations for Hot Cell Equipment
  • C1534 - 20a Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
  • C1535 - 05(2017) Practice for Application of Exterior Insulation and Finish Systems Class PI
  • C1536 - 19 Test Method for Measuring the Yield for Aerosol Foam Sealants
  • C1539 - 08(2014) Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
  • C1540 - 20 Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
  • C1541 - 12(2017) Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
  • C1542/C1542M - 19 Test Method for Measuring Length of Concrete Cores
  • C1545 - 02(2020) Practice for Dispersing Pigments and Other Materials Into Water-Based Suspensions With High Intensity Mixer
  • C1546 - 19 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
  • C1547 - 02(2018) Classification for Fusion-Cast Refractory Blocks and Shapes
  • C1548 - 02(2020) Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
  • C1549 - 16 Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
  • C1550 - 20 Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
  • C1552 - 16 Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
  • C1553 - 16 Guide for Drying Behavior of Spent Nuclear Fuel
  • C1554 - 18 Guide for Materials Handling Equipment for Hot Cells
  • C1556 - 11a(2016) Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • C1557 - 20 Test Method for Tensile Strength and Young's Modulus of Fibers
  • C1558 - 19 Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
  • C1559 - 15 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
  • C1560 - 03(2016) Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
  • C1561 - 10(2016) Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
  • C1562 - 10(2018) Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
  • C1563 - 08(2017) Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
  • C1564 - 20 Guide for Use of Silicone Sealants for Protective Glazing Systems
  • C1565 - 19 Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
  • C1567 - 13 Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
  • C1568 - 08(2020) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
  • C1569 - 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
  • C1570 - 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
  • C1572/C1572M - 18 Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
  • C1574 - 04(2018) Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
  • C1576 - 05(2017) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
  • C1577 - 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
  • C1579 - 13 Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
  • C1580 - 15 Test Method for Water-Soluble Sulfate in Soil
  • C1581/C1581M - 18a Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
  • C1582/C1582M - 11(2017)e1 Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
  • C1583/C1583M - 20 Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
  • C1585 - 20 Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
  • C1586 - 20 Guide for Quality Assurance of Mortars
  • C1587/C1587M - 15 Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
  • C1589/C1589M - 18 Practice for Outdoor Weathering of Construction Seals and Sealants
  • C1590 - 04(2014) Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
  • C1594 - 11(2017) Specification for Polyimide Rigid Cellular Thermal Insulation
  • C1600/C1600M - 19 Specification for Rapid Hardening Hydraulic Cement
  • C1601 - 20 Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
  • C1602/C1602M - 18 Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
  • C1603 - 16 Test Method for Measurement of Solids in Water
  • C1604/C1604M - 05(2019) Test Method for Obtaining and Testing Drilled Cores of Shotcrete
  • C1605 - 04(2014) Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • C1606 - 10(2018) Test Method for Sampling Protocol for TCLP Testing of Container Glassware
  • C1607 - 12(2020) Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
  • C1608 - 17 Test Method for Chemical Shrinkage of Hydraulic Cement Paste
  • C1609/C1609M - 19a Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
  • C1610/C1610M - 19 Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
  • C1611/C1611M - 18 Test Method for Slump Flow of Self-Consolidating Concrete
  • C1613 - 17 Specification for Precast Concrete Grease Interceptor Tanks
  • C1615/C1615M - 17 Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
  • C1616 - 07(2018) Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
  • C1617 - 19 Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
  • C1618M - 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
  • C1618 - 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
  • C1619 - 20 Specification for Elastomeric Seals for Joining Concrete Structures
  • C1620 - 16e1 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
  • C1621/C1621M - 17 Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
  • C1622/C1622M - 10(2016)e1 Specification for Cold-Weather Admixture Systems
  • C1623 - 17a Specification for Manufactured Concrete Masonry Lintels
  • C1624 - 05(2015) Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
  • C1625 - 19 Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
  • C1628 - 19 Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
  • C1629/C1629M - 19 Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
  • C1630 - 19 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
  • C1634 - 20 Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
  • C1635 - 16 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
  • C1636 - 13 Guide for the Determination of Uranium-232 in Uranium Hexafluoride
  • C1637 - 13 Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
  • C1638 - 06(2013) Guide for the Determination of Iodine-129 In Uranium Oxide
  • C1639 - 19 Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
  • C1642 - 20 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
  • C1643 - 14(2020) Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
  • C1644 - 06(2017) Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
  • C1645 - 19 Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
  • C1646/C1646M - 16 Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
  • C1647 - 20 Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
  • C1648 - 12(2018) Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
  • C1649 - 14 Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
  • C1650 - 14 Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
  • C1651 - 11(2018) Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
  • C1652/C1652M - 14 Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
  • C1655 - 06(2016) Classification of Fireclay and High-Alumina Mortars
  • C1656 - 13(2018) Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
  • C1658/C1658M - 19e1 Specification for Glass Mat Gypsum Panels
  • C1660 - 10(2018) Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
  • C1661 - 18 Guide for Viewing Systems for Remotely Operated Facilities
  • C1662 - 18 Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
  • C1663 - 18 Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
  • C1666/C1666M - 08(2015) Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
  • C1667 - 15 Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
  • C1668 - 20 Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
  • C1670/C1670M - 20a Specification for Adhered Manufactured Stone Masonry Veneer Units
  • C1671 - 20a Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
  • C1672 - 17 Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
  • C1673 - 10a(2018) Terminology of C26.10 Nondestructive Assay Methods
  • C1674 - 16 Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
  • C1675 - 21 Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
  • C1676/C1676M - 19 Specification for Microporous Thermal Insulation
  • C1677 - 11a(2017) Specification for Joints for Concrete Box, Using Rubber Gaskets
  • C1678 - 10(2015) Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
  • C1679 - 17 Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
  • C1681 - 18 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
  • C1682 - 17 Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal
  • C1683 - 10(2019) Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
  • C1684 - 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
  • C1685 - 15 Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
  • C1686 - 09(2017) Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
  • C1688/C1688M - 14a Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
  • C1689 - 08a(2014) Practice for Subsampling of Uranium Hexafluoride
  • C1691 - 11(2017) Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
  • C1692 - 18 Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
  • C1693 - 11(2017) Specification for Autoclaved Aerated Concrete (AAC)
  • C1694 - 09(2017) Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
  • C1695 - 20 Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
  • C1696 - 20 Guide for Industrial Thermal Insulation Systems
  • C1697 - 18 Specification for Blended Supplementary Cementitious Materials
  • C1698 - 19 Test Method for Autogenous Strain of Cement Paste and Mortar
  • C1699 - 09(2015) Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
  • C1701/C1701M - 17a Test Method for Infiltration Rate of In Place Pervious Concrete
  • C1702 - 17 Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
  • C1703 - 18 Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
  • C1704/C1704M - 09a(2016) Test Method for Sampling and Testing Structural Cementitious Panels
  • C1705/C1705M - 09(2016) Specification for Structural Cementitious Panels
  • C1707 - 18 Specification for Pozzolanic Hydraulic Lime for Structural Purposes
  • C1708/C1708M - 19 Test Methods for Self-leveling Mortars Containing Hydraulic Cements
  • C1709 - 18 Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
  • C1710 - 20 Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
  • C1712 - 20 Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
  • C1713 - 17 Specification for Mortars for the Repair of Historic Masonry
  • C1714/C1714M - 19a Specification for Preblended Dry Mortar Mix for Unit Masonry
  • C1715/C1715M - 15 Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
  • C1716/C1716M - 20 Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
  • C1717 - 19 Test Methods for Conducting Strength Tests of Masonry Wall Panels
  • C1718 - 10(2019) Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
  • C1719 - 11(2017) Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
  • C1720 - 17e1 Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
  • C1721 - 15 Guide for Petrographic Examination of Dimension Stone
  • C1722 - 18 Guide for Repair and Restoration of Dimension Stone
  • C1723 - 16 Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
  • C1725 - 17 Guide for Hot Cell Specialized Support Equipment and Tools
  • C1726/C1726M - 10(2018) Guide for Use of Modeling for Passive Gamma Measurements
  • C1728 - 20b Specification for Flexible Aerogel Insulation
  • C1729 - 19 Specification for Aluminum Jacketing for Insulation
  • C1729M - 19 Specification for Aluminum Jacketing for Insulation
  • C1730 - 17 Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
  • C1731 - 16 Specification for Concrete Floor Tile
  • C1732 - 19 Practice for Installation of Concrete Floor Tiles
  • C1733 - 20 Test Method for Distribution Coefficients of Inorganic Species by Batch Method
  • C1735 - 17 Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
  • C1737 - 16 Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
  • C1738/C1738M - 19 Practice for High-Shear Mixing of Hydraulic Cement Pastes
  • C1740 - 16 Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
  • C1741 - 18 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
  • C1742 - 17 Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
  • C1743 - 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
  • C1744 - 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
  • C1745/C1745M - 18 Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • C1746/C1746M - 19 Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • C1747/C1747M - 13 Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
  • C1749 - 17a Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
  • C1750 - 17 Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
  • C1751 - 20 Guide for Sampling Radioactive Tank Waste
  • C1752 - 17 Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
  • C1753/C1753M - 15e1 Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
  • C1754/C1754M - 12 Test Method for Density and Void Content of Hardened Pervious Concrete
  • C1756 - 17a Guide for Comparing Seal or Sealant Behavior to Reference Photographs
  • C1757 - 13 Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete
  • C1758/C1758M - 15 Practice for Fabricating Test Specimens with Self-Consolidating Concrete
  • C1760 - 12 Test Method for Bulk Electrical Conductivity of Hardened Concrete
  • C1761/C1761M - 17 Specification for Lightweight Aggregate for Internal Curing of Concrete
  • C1763 - 20 Test Method for Water Absorption by Immersion of Thermal Insulation Materials
  • C1764 - 20 Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
  • C1765 - 19 Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • C1766 - 15(2019) Specification for Factory-Laminated Gypsum Panel Products
  • C1767 - 19 Specification for Stainless Steel Jacketing for Insulation
  • C1767M - 19 Specification for Stainless Steel Jacketing for Insulation
  • C1768/C1768M - 12(2017) Practice for Accelerated Curing of Concrete Cylinders
  • C1769 - 15 Practice for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup
  • C1770 - 13 Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide
  • C1771 - 19 Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
  • C1773 - 17 Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
  • C1774 - 13(2019) Guide for Thermal Performance Testing of Cryogenic Insulation Systems
  • C1775 - 14 Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
  • C1776/C1776M - 17 Specification for Wet-Cast Precast Modular Retaining Wall Units
  • C1777 - 20 Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
  • C1778 - 20 Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
  • C1778-RU-RU - 20 Стандартное руководство по снижению риска возникновения вредной реакции между заполнителем и щелочью в бетоне
  • C1780 - 20 Practice for Installation Methods for Cement-based Adhered Masonry Veneer
  • C1781/C1781M - 18e1 Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
  • C1782/C1782M - 20a Specification for Segmental Concrete Paving Slabs
  • C1783 - 15 Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
  • C1784 - 20 Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
  • C1785 - 17 Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • C1786 - 19 Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
  • C1787 - 20 Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
  • C1788 - 20 Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
  • C1789 - 14(2018) Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
  • C1790 - 15 Specification for Fly Ash Facing Brick
  • C1791 - 16 Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
  • C1792 - 14 Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes
  • C1793 - 15 Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
  • C1794 - 19 Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion
  • C1795 - 17 Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
  • C1797 - 17 Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
  • C1798/C1798M - 19 Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
  • C1799/C1799M - 19 Guide to Dimension Stone Test Specimen Sampling and Preparation
  • C1800/C1800M - 16 Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
  • C1802 - 20 Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
  • C1803 - 15 Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
  • C1804 - 20 Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
  • C1806 - 14 Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
  • C1807 - 15 Guide for Nondestructive Assay of Special Nuclear Material (SNM) Holdup Using Passive Neutron Measurement Methods
  • C1809 - 20 Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
  • C1810/C1810M - 20a Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • C1812/C1812M - 15e1 Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
  • C1814/C1814M - 20 Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
  • C1815 - 17 Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
  • C1816 - 16 Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
  • C1817 - 16 Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry
  • C1818 - 19 Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • C1819 - 15 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
  • C1819-RU-RU - 15 Стандартный метод испытания для определения кольцевой прочности на растяжение трубчатых образцов из композитных материалов с матрицей из высококачественной керамики, армированных непрерывным волокном, при температуре окружающей среды с использованием эластомерной вставки
  • C1821/C1821M - 16(2021)e1 Practice for Installation of Underground Circular Precast Concrete Manhole Structures
  • C1822 - 15 Specification for Insulating Covers on Accessible Lavatory Piping
  • C1823/C1823M - 20 Test Method for Shear Bond Strength of Adhered Dimension Stone
  • C1824 - 16(2021) Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
  • C1825 - 19 Guide for Developing Specifications for Masonry Units
  • C1827 - 20 Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
  • C1827-RU-RU - 20 Стандартный метод испытания для определения потребности в воздухововлекающей добавке цементирующей смеси
  • C1831/C1831M - 17 Guide for Gamma Radiation Shielding Performance Testing
  • C1832 - 16 Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
  • C1834 - 16 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
  • C1835 - 16 Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
  • C1835-RU-RU - 16 Стандартная классификация карбидкремниевых композитов, армированных карбидкремниевым волокном (SiC-SiC)
  • C1836 - 16 Classification for Fiber Reinforced Carbon-Carbon Composite Structures
  • C1836-RU-RU - 16 Стандартная классификация армированных волокном конструкций из углерод-углеродного композитного материала, армированных волокном
  • C1837 - 17 Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
  • C1838 - 16 Practice for Cleaning for 1S and 2S Bottles
  • C1840/C1840M - 17 Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
  • C1842 - 16 Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • C1842-RU-RU - 16 Стандартный метод испытаний для анализа бора и кремния в гексафториде урана с помощью инфракрасной спектроскопии с Фурьепреобразованием (FTIR)
  • C1843 - 16 Test Method for Determining Moisture Content in Uranium-Ore Concentrate
  • C1844 - 16 Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution
  • C1845 - 16 Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • C1846/C1846M - 19 Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • C1848 - 17a Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
  • C1849/C1849M - 17 Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
  • C1849/C1849M-RU-RU - 17 Стандартный метод испытания для определения плотности и воздухосодержания (метод давления) свежеприготовленного уплотняемого катком бетона
  • C1850 - 17 Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
  • C1851 - 18 Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
  • C1852 - 20 Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
  • C1853 - 17 Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method
  • C1854 - 17 Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement
  • C1855 - 18 Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence
  • C1856/C1856M - 17 Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
  • C1857/C1857M - 19 Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar
  • C1858 - 17a Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
  • C1859 - 19 Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope
  • C1860 - 20 Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
  • C1861 - 20 Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
  • C1862 - 17 Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
  • C1863 - 18 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
  • C1864 - 17e1 Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer
  • C1865 - 18 Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
  • C1866/C1866M - 20 Specification for Ground-Glass Pozzolan for Use in Concrete
  • C1868 - 18 Practice for Ceramographic Preparation of UO2 and Mixed Oxide (U,Pu)O2 Pellets for Microstructural Analysis
  • C1869 - 18 Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
  • C1870 - 18 Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
  • C1871 - 18a Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
  • C1872 - 18e2 Test Method for Thermogravimetric Analysis of Hydraulic Cement
  • C1874 - 20 Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
  • C1875 - 18 Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
  • C1876 - 19 Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
  • C1877 - 19 Specification for Adhered Concrete Masonry Units
  • C1878 - 19 Test Method for Surface Water Resistance of Vapor Retarders for Thermal Insulation
  • C1880 - 19 Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
  • C1881 - 20 Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products
  • C1883 - 19 Practice for Sampling of Gaseous Enriched Uranium Hexafluoride
  • C1884 - 19 Specification for Concrete Ballast Block
  • C1889 - 21 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Utility, Water, and Wastewater Structures Using AASHTO LRFD Design
  • C1890 - 19 Test Method for K-slump of Freshly Mixed Concrete
  • C1891 - 20 Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
  • C1892/C1892M - 20a Test Methods for Strength of Anchors in Masonry
  • C1894 - 19 Guide for Microbially Induced Corrosion of Concrete Products
  • C1895 - 20 Test Method for Determination of Mohs Scratch Hardness
  • C1896 - 20 Specification for Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
  • C1897 - 20 Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
  • C1898 - 20 Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack
  • C1900 - 20 Practice for Weathering and Evaluation of Laminated Glass
  • C1902 - 20 Specification for Cellular Glass Insulation Used in Building and Roof Applications
  • C1903 - 21 Specification for Precast Concrete Duct Bank
  • C1904 - 20 Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Product

DEdit

EEdit

FEdit

GEdit

G1-G999Edit

  • G1 - 03(2017)e1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
  • G1-RU-RU - 03(2017)e1 Стандартное практическое руководство по подготовке, очистке и оценке образцов для коррозионного испытания
  • G2/G2M - 19 Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
  • G3 - 14(2019) Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
  • G4 - 01(2014) Guide for Conducting Corrosion Tests in Field Applications
  • G4-RU-RU - 01(2014) Стандартное руководство по проведению коррозионных испытаний в условиях эксплуатации
  • G5 - 14e1 Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
  • G6 - 07(2020) Test Method for Abrasion Resistance of Pipeline Coatings
  • G7/G7M - 13 Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
  • G8 - 96(2019) Test Methods for Cathodic Disbonding of Pipeline Coatings
  • G8-RU-RU - 96(2019) Стандартные методы испытаний для проверки катодного отслаивания покрытий трубопровода
  • G9 - 07(2020) Test Method for Water Penetration into Pipeline Coatings
  • G10 - 10(2019) Test Method for Specific Bendability of Pipeline Coatings
  • G11 - 19 Practice for Effects of Outdoor Weathering on Pipeline Coatings
  • G13/G13M - 13 Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
  • G14 - 04(2018) Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
  • G14-RU-RU - 04(2018) Стандартный метод испытания для определения ударной прочности покрытий трубопроводов (ударные испытания падающим грузом)
  • G16 - 13(2019) Guide for Applying Statistics to Analysis of Corrosion Data
  • G17 - 07(2020) Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
  • G18 - 07(2020) Test Method for Joints, Fittings, and Patches in Coated Pipelines
  • G20 - 10(2019) Test Method for Chemical Resistance of Pipeline Coatings
  • G21 - 15 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
  • G21-RU-RU - 15 Стандартные практические указания по определению плеснестойкости синтетических полимерных материалов
  • G24 - 13 Practice for Conducting Exposures to Daylight Filtered Through Glass
  • G28 - 02(2015) Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
  • G28-RU-RU - 02(2015) Стандартный метод испытания для обнаружения восприимчивости к межкристаллитной коррозии в кованых, никелевых, хром-содержащих сплавах
  • G29 - 16 Practice for Determining Algal Resistance of Polymeric Films
  • G30 - 97(2016) Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
  • G31 (ASTM/NACE) Guide for Laboratory Immersion Corrosion Testing of Metals
  • G32 - 16 Test Method for Cavitation Erosion Using Vibratory Apparatus
  • G33 - 99(2020) Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
  • G34 - 01(2018)e1 Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
  • G35 - 98(2015) Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
  • G36 - 94(2018) Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
  • G37 - 98(2016) Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
  • G38 - 01(2013) Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
  • G39 - 99(2016) Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
  • G39-RU-RU - 99(2016) Стандартное практическое руководство по приготовлению и использованию образцов для испытания на коррозию под напряжением изогнутых балок
  • G40 - 17 Terminology Relating to Wear and Erosion
  • G41 - 90(2018) Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
  • G42 - 11(2019)e1 Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
  • G42-RU-RU - 11(2019)e1 Стандартный метод испытания для определения катодного отслаивания покрытий трубопроводов, подвергаемых действию повышенных температур
  • G44 - 99(2013) Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
  • G46 - 94(2018) Guide for Examination and Evaluation of Pitting Corrosion
  • G46-RU-RU - 94(2018) Стандартное руководство по исследованию и оценке питтинговой коррозии
  • G47 - 20 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
  • G48 - 11(2020)e1 Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
  • G49 - 85(2019) Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
  • G49-RU-RU - 85(2019) Стандартное практическое руководство по подготовке и использованию образцов для испытания на коррозию под действием напряжения при прямом растяжении
  • G50 - 20 Practice for Conducting Atmospheric Corrosion Tests on Metals
  • G51 - 18 Test Method for Measuring pH of Soil for Use in Corrosion Testing
  • G52 - 20 Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
  • G55 - 07(2019) Test Method for Evaluating Pipeline Coating Patch Materials
  • G56 - 18 Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
  • G57 - 20 Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
  • G58 - 85(2015) Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
  • G59 - 97(2020) Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
  • G60 - 01(2018) Practice for Conducting Cyclic Humidity Exposures
  • G61 - 86(2018) Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
  • G62 - 14 Test Methods for Holiday Detection in Pipeline Coatings
  • G62-RUS - 14 Стандартные методы определения пропусков в защитном покрытии трубопровода
  • G63 - 15 Guide for Evaluating Nonmetallic Materials for Oxygen Service
  • G64 - 99(2013) Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
  • G65 - 16e1 Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
  • G66 - 99(2018) Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
  • G67 - 18 Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
  • G69 - 20 Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
  • G71 - 81(2019) Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
  • G72/G72M - 15 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
  • G73 - 10(2017) Test Method for Liquid Impingement Erosion Using Rotating Apparatus
  • G74 - 13 Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
  • G75 - 15 Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
  • G76 - 18 Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • G77 - 17 Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
  • G78 - 20 Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
  • G81 - 97a(2018) Test Method for Jaw Crusher Gouging Abrasion Test
  • G82 - 98(2021)e1 Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
  • G84 - 89(2020) Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
  • G85 - 19 Practice for Modified Salt Spray (Fog) Testing
  • G86 - 17 Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
  • G87 - 02(2018) Practice for Conducting Moist SO2 Tests
  • G88 - 13 Guide for Designing Systems for Oxygen Service
  • G90 - 17 Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight
  • G91 - 11(2018) Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
  • G92 - 20 Practice for Characterization of Atmospheric Test Sites
  • G93/G93M - 19 Guide for Cleanliness Levels and Cleaning Methods for Materials and Equipment Used in Oxygen-Enriched Environments
  • G94 - 05(2014) Guide for Evaluating Metals for Oxygen Service
  • G95 - 07(2013) Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
  • G95-RU-RU - 07(2013) Стандартный метод испытания для проверки катодного отслаивания покрытий трубопроводов (метод с применением контрольной ячейки)
  • G96 - 90(2018) Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
  • G97 - 18 Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
  • G98 - 17 Test Method for Galling Resistance of Materials
  • G99 - 17 Test Method for Wear Testing with a Pin-on-Disk Apparatus
  • G100 - 89(2015) Test Method for Conducting Cyclic Galvanostaircase Polarization
  • G101 - 04(2020) Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
  • G102 - 89(2015)e1 Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
  • G103 - 97(2016) Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution
  • G105 - 20 Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
  • G106 - 89(2015) Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
  • G107 - 95(2020)e1 Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
  • G108 - 94(2015) Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
  • G109 - 07(2013) Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
  • G110 - 92(2015) Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
  • G111 - 97(2018) Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
  • G112 - 92(2015) Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
  • G113 - 16 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • G114 - 14 Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
  • G115 - 10(2018) Guide for Measuring and Reporting Friction Coefficients
  • G116 - 99(2020)e1 Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
  • G119 - 09(2016) Guide for Determining Synergism Between Wear and Corrosion
  • G120 - 15 Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
  • G121 - 18 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
  • G122 - 20 Test Method for Evaluating the Effectiveness of Cleaning Agents and Processes
  • G123 - 00(2015) Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
  • G124 - 18 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
  • G125 - 00(2015) Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • G126 - 16 Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
  • G127 - 15 Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
  • G128/G128M - 15 Guide for Control of Hazards and Risks in Oxygen Enriched Systems
  • G129 - 00(2013) Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
  • G130 - 12(2020) Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • G131 - 96(2016)e1 Practice for Cleaning of Materials and Components by Ultrasonic Techniques
  • G132 - 96(2018) Test Method for Pin Abrasion Testing
  • G133 - 05(2016) Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
  • G134 - 17 Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
  • G135 - 95(2019) Guide for Computerized Exchange of Corrosion Data for Metals
  • G136 - 03(2016)e1 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • G137 - 97(2017) Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
  • G138 - 12(2020)e1 Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • G139 - 05(2015) Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
  • G140 - 02(2019) Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
  • G141 - 09(2013) Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
  • G142 - 98(2016) Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
  • G143 - 03(2018) Test Method for Measurement of Web/Roller Friction Characteristics
  • G144 - 01(2014) Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
  • G145 - 08(2016) Guide for Studying Fire Incidents in Oxygen Systems
  • G146 - 01(2018) Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
  • G147 - 17 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
  • G148 - 97(2018) Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
  • G148-RU-RU - 97(2018) Стандартное практическое руководство для оценки поглощения, проникновения и перемещения водорода в металлах электрохимической методикой
  • G150 - 18 Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
  • G151 - 19 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
  • G151-RU-RU - 19 СТАНДАРТНАЯ МЕТОДИКА ЭКСПОНИРОВАНИЯ НЕМЕТАЛЛИЧЕСКИХ МАТЕРИАЛОВ ЛАБОРАТОРНЫМИ ИСТОЧНИКАМИ СВЕТА В УСТРОЙСТВАХ ДЛЯ УСКОРЕННЫХ ИСПЫТАНИЙ
  • G152 - 13 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • G153 - 13 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • G154 - 16 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • G155 - 13 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
  • G155-RU-RU - 13 СТАНДАРТНАЯ МЕТОДИКА РАБОТЫ АППАРАТА С КСЕНОНОВОЙ СВЕТОВОЙ ДУГОЙ ДЛЯ ВОЗДЕЙСТВИЯ НА НЕМЕТАЛЛИЧЕСКИЕ МАТЕРИАЛЫ
  • G156 - 17 Practice for Selecting and Characterizing Weathering Reference Materials
  • G157 - 98(2018) Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
  • G158 - 98(2016) Guide for Three Methods of Assessing Buried Steel Tanks
  • G160 - 12(2019) Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
  • G161 - 00(2018) Guide for Corrosion-Related Failure Analysis
  • G162 - 18 Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
  • G164 - 99(2018) Test Method for Determination of Surface Lubrication on Flexible Webs
  • G165 - 99(2017) Practice for Determining Rail-to-Earth Resistance
  • G166 - 00(2020) Guide for Statistical Analysis of Service Life Data
  • G167 - 15 Test Method for Calibration of a Pyranometer Using a Pyrheliometer
  • G168 - 17 Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
  • G169 - 01(2013) Guide for Application of Basic Statistical Methods to Weathering Tests
  • G170 - 06(2020)e1 Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
  • G171 - 03(2017) Test Method for Scratch Hardness of Materials Using a Diamond Stylus
  • G172 - 19 Guide for Statistical Analysis of Accelerated Service Life Data
  • G173 - 03(2020) Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
  • G174 - 04(2017) Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
  • G175 - 13 Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
  • G176 - 03(2017) Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
  • G177 - 03(2020) Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
  • G178 - 16 Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
  • G179 - 04(2019) Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
  • G180 - 13(2019) Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
  • G181 - 11(2017) Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
  • G182 - 13(2018) Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
  • G183 - 15 Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • G184 - 06(2020)e1 Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
  • G185 - 06(2020)e1 Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
  • G186 - 05(2016) Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
  • G187 - 18 Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
  • G188 - 05(2017) Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
  • G189 - 07(2021)e1 Guide for Laboratory Simulation of Corrosion Under Insulation
  • G190 - 15 Guide for Developing and Selecting Wear Tests
  • G192 - 08(2020)e1 Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
  • G193 - 20a Terminology and Acronyms Relating to Corrosion
  • G194 - 08(2018) Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
  • G195 - 18 Guide for Conducting Wear Tests Using a Rotary Platform Abraser
  • G196 - 08(2016) Test Method for Galling Resistance of Material Couples
  • G197 - 14 Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
  • G198 - 17 Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
  • G199 - 09(2020)e1 Guide for Electrochemical Noise Measurement
  • G200 - 20 Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
  • G201 - 16 Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
  • G202 - 12(2020) Test Method for Using Atmospheric Pressure Rotating Cage
  • G203 - 10(2020) Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
  • G204 - 15 Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
  • G205 - 16 Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
  • G206 - 17 Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
  • G207 - 11(2019)e1 Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
  • G208 - 12(2020) Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
  • G209 - 14(2018) Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
  • G210 - 13(2018) Practice for Operating the Severe Wastewater Analysis Testing Apparatus
  • G211 - 14(2020) Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
  • G213 - 17 Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
  • G214 - 16 Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications
  • G215 - 17 Guide for Electrode Potential Measurement
  • G217 - 16 Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
  • G218 - 19 Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection
  • G219 - 18 Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
  • G220 - 20 Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potential

Withdrawn StandardEdit

  • G12 Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013, replaced by D7091)
  • G19 Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010, no replacement)
  • G70 Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013, no replacement)
  • G80 Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013, no replacement)
  • G117 Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016, no replacement)
  • G118 Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016, no replacement)

See alsoEdit

ReferencesEdit

  1. ^ "ASTM A255 - 10(2014) Test Methods for Determining Hardenability of Steel". ASTM. 2014. Retrieved August 29, 2017.

External linksEdit