This article needs additional citations for verification. (October 2012) (Learn how and when to remove this template message)
A lifting gas or lighter than air gas is a gas that has a lower density than normal atmospheric gases and rises above them as a result. It is required for aerostats to create buoyancy, particularly in Lighter-than-air aircraft, which include free balloons, moored balloons, and airships. Only certain lighter than air gases are suitable as lifting gases. Dry air has a density of about 1.29 g/L (gram per liter) at standard conditions for temperature and pressure (STP) and an average molecular mass of 28.97 g/mol, and so lighter than air gases have a density lower than this.
- 1 Gases theoretically suitable for lifting
- 2 Gases impractical for lifting
- 3 Hydrogen versus helium
- 4 High-altitude ballooning
- 5 Submerged balloons
- 6 Balloons on other celestial bodies
- 7 See also
- 8 References
- 9 External links
Gases theoretically suitable for liftingEdit
Heated atmospheric air is frequently used in recreational ballooning. According to the Ideal gas law, an amount of gas (and also a mixture of gases such as air) expands as it is heated. As a result, a certain volume of gas has a lower density as the temperature is higher. The average temperature of air in a hot air balloon is about 212 °F (100 °C).
Hydrogen, being the lightest existing gas (7% the density of air), seems to be the most appropriate gas for lifting. It can be easily produced in large quantities through electrolysis of water, but hydrogen has several disadvantages:
- Hydrogen is extremely flammable. Some countries have banned the use of hydrogen as a lift gas for commercial vehicles but it is allowed for recreational free ballooning in the US, UK and Germany. The Hindenburg disaster is frequently cited as an example of the safety risks posed by hydrogen. The high cost of helium (compared to hydrogen) has led researchers to re-investigate the safety issues of using hydrogen as a lift gas; with good engineering and good handling practices, the risks can be significantly reduced.
- Because the hydrogen molecule is very small, it can easily diffuse through many materials such as latex, so that the balloon will deflate quickly. This is one reason that many hydrogen or helium filled balloons are constructed out of Mylar/BoPET.
Helium is the second lightest gas. For that reason, it is an attractive gas for lifting as well.
A major advantage is that this gas is noncombustible. But the use of helium has some disadvantages, too:
- The diffusion issue shared with Hydrogen (though, as Helium's molecular radius is smaller, it diffuses through more materials than Hydrogen).
- Helium is expensive.
- Although abundant in the universe, helium is very scarce on Earth. The only commercially viable reserves are a few natural gas wells, mostly in the US, that trapped it from the slow alpha decay of radioactive materials within Earth. By human standards helium is a non-renewable resource that cannot be practically manufactured from other materials. When released into the atmosphere, e.g., when a helium-filled balloon leaks or bursts, helium eventually escapes into space and is lost.
Hydrogen and heliumEdit
Hydrogen (density 0.090 g/L at STP, average molecular mass 2.016 g/mol) and helium (density 0.179 g/L at STP, average molecular mass 4.003 g/mol) are the most commonly used lift gases. Although helium is twice as heavy as (diatomic) hydrogen, they are both much lighter than air that this difference only results in hydrogen having 8% more buoyancy than helium.
In a practical dirigible design, the difference is significant, making a 50% difference in the fuel-carrying capacity of the dirigible and hence increasing its range significantly. However, hydrogen is extremely flammable and its use as a lifting gas in dirigibles has decreased since the Hindenburg disaster. Helium is safer as a lifting gas because it is inert and does not undergo combustion.
The gaseous state of water is lighter than air (density 0.804 g/L at STP, average molecular mass 18.015 g/mol) due to water's low molar mass when compared with typical atmospheric gases such as nitrogen gas ( ). It is non-flammable and much cheaper than helium. The concept of using steam for lifting is therefore already 200 years old. The biggest challenge has always been to make a material that can resist it. In 2003, a university team in Berlin, Germany, has successfully made a 150 °C steam lifted balloon. However, such a design is generally impractical due to high boiling point and condensation.
Ammonia is sometimes used to fill weather balloons. Due to its high boiling point (compared to helium and hydrogen), ammonia could potentially be refrigerated and liquefied aboard an airship to reduce lift and add ballast (and returned to a gas to add lift and reduce ballast). Ammonia gas is relatively heavy (density 0.769 g/L at STP, average molecular mass 17.03 g/mol), poisonous, an irritant, and can damage many metals and plastics.
Methane (density 0.716 g/L at STP, average molecular mass 16.04 g/mol), the main component of natural gas, is sometimes used as a lift gas when hydrogen and helium are not available. It has the advantage of not leaking through balloon walls as rapidly as the smaller molecules of hydrogen and helium. Many lighter-than-air balloons are made of aluminized plastic that limits such leakage; hydrogen and helium leak rapidly through latex balloons. However, methane is highly flammable and like hydrogen is not appropriate for use in passenger-carrying airships. It is also relatively dense and a potent greenhouse gas.
Hydrogen fluoride is lighter than air and could theoretically be used as a lifting gas. However, it is extremely corrosive, highly toxic, expensive, is heavier than other lifting gases, and has a high boiling point of 19.5 °C. Its use would therefore be impractical.
In the past, coal gas, a mixture of hydrogen, carbon monoxide and other gases, was also used in balloons. It was widely available and cheap; the down side was a higher density (reducing lift) and the high toxicity of the carbon monoxide.
Acetylene is 10% lighter than air and could be used as a lifting gas. Its extreme flammability and low lifting power make it an unattractive choice.
Hydrogen cyanide, which is 7% lighter than air, is technically capable of being used as a lifting gas at temperatures above its boiling point of 25.6 °C. Its extreme toxicity, low buoyancy, and high boiling point have precluded such a use.
Neon is lighter than air (density 0.900 g/L at STP, average atomic mass 20.17g/mol) and could lift a balloon. Like helium, it is non-flammable. However, it is rare on Earth and expensive, and is among the heavier lifting gases.
Pure nitrogen has the advantage that it is inert and abundantly available, because it is the major component of air. However, because nitrogen is only 3% lighter than air, it is not an obvious choice for a lifting gas.
Theoretically, an aerostatic vehicle could be made to use a vacuum or partial vacuum. As early as 1670, over a century before the first manned hot-air balloon flight, the Italian monk Francesco Lana de Terzi envisioned a ship with four vacuum spheres.
In a theoretically perfect situation with weightless spheres, a 'vacuum balloon' would have 7% more net lifting force than a hydrogen-filled balloon, and 16% more net lifting force than a helium-filled one. However, because the walls of the balloon must be able to remain rigid without imploding, the balloon is impractical to construct with all known materials. Despite that, sometimes there is discussion on the topic.
Another medium that in theory could be used is a plasma: Ions repelling each other could give a pressure intermediate between vacuum and hydrogen and hence that counteracts the atmospheric pressure. The energy and the containment requirements are extremely impractical, so that it may only be interesting for science fiction.
It is also possible to combine some of the above solutions. A well-known example is the Rozière balloon which combines a core of helium with an outer shell of hot air.
Gases impractical for liftingEdit
Hydrogen versus heliumEdit
The lifting power in air of hydrogen and helium can be calculated using the theory of buoyancy as follows:
Thus helium is almost twice as dense as hydrogen. However, buoyancy depends upon the difference of the densities (ρgas) − (ρair) rather than upon their ratios. Thus the difference in buoyancies is about 8%, as seen from the buoyancy equation:
- FB = (ρair - ρgas) × g × V
Where FB = Buoyant force (in Newton); g = gravitational acceleration = 9.8066 m/s² = 9.8066 N/kg; V = volume (in m³). Therefore, the amount of mass that can be lifted by hydrogen in air at sea level, equal to the density difference between hydrogen and air, is:
- (1.292 - 0.090) kg/m3 = 1.202 kg/m3
and the buoyant force for one m3 of hydrogen in air at sea level is:
- 1 m3 × 1.202 kg/m3 × 9.8 N/kg= 11.8 N
Therefore, the amount of mass that can be lifted by helium in air at sea level is:
- (1.292 - 0.178) kg/m3 = 1.114 kg/m3
and the buoyant force for one m3 of helium in air at sea level is:
- 1 m3 × 1.114 kg/m3 × 9.8 N/kg= 10.9 N
Thus hydrogen's additional buoyancy compared to helium is:
- 11.8 / 10.9 ≈ 1.08, or approximately 8.0%
This calculation is at sea level at 0 °C. For higher altitudes, or higher temperatures, the amount of lift will decrease proportionally to the air density, but the ratio of the lifting capability of hydrogen to that of helium will remain the same. This calculation does not include the mass of the envelope need to hold the lifting gas.
At higher altitudes, the air pressure is lower and therefore the pressure inside the balloon is also lower. This means that while the mass of lifting gas and mass of displaced air for a given lift are the same as at lower altitude, the volume of the balloon is much greater at higher altitudes.
A balloon that is designed to lift to extreme heights (stratosphere), must be able to expand enormously in order to displace the required amount of air. That is why such balloons seem almost empty at launch, as can be seen in the photo.
A different approach for high altitude ballooning, especially used for long duration flights is the superpressure balloon. A superpressure balloon maintains a higher pressure inside the balloon than the external (ambient) pressure.
In 2002, aerogel held the Guinness World Record for the least dense (lightest) solid. Aerogel is mostly air because its structure is like that of a highly vacuous sponge. The lightness and low density is due primarily to the large proportion of air within the solid and not the silicon construction materials. Taking advantage of this, SEAgel, in the same family as aerogel but made from agar, can be filled with helium gas to create a solid which floats when placed in an open top container filled with a dense gas.
In 2012, discovery of aerographite was announced, breaking the record for the least dense material at only 0.2 mg/cm3 (0.2 kg/m3). These solids do not float in air because the hollow spaces in them become filled with air. No lighter-than-air matrix or shell containing a hard vacuum has ever been constructed.
Because of the enormous density difference between water and gases (water is about 1,000 times more dense than most gases), the lifting power of underwater gases is very strong. The type of gas used is largely inconsequential because the relative differences between gases is negligible in relation to the density of water. However, some gases can liquefy under high pressure, leading to an abrupt loss of buoyancy.
A submerged balloon that rises will expand or even explode because of the strong pressure reduction, unless gas is able to escape continuously during the ascent or the balloon is strong enough to withstand the change in pressure.
Balloons on other celestial bodiesEdit
A balloon can only have buoyancy if there is a medium that has a higher average density than the balloon itself.
- Balloons cannot work on the Moon because it has no atmosphere.
- Mars has a very thin atmosphere – the pressure is only 1/160th of earth atmospheric pressure – so a huge balloon would be needed even for a tiny lifting effect. Overcoming the weight of such a balloon would be difficult, but several proposals to explore Mars with balloons have been made.
- Venus has a CO2 atmosphere at the surface. Because CO2 is about 50% more dense than Earth air, ordinary Earth air could be a lifting gas on Venus. This has led to proposals for a human habitat that would float in the atmosphere of Venus at an altitude where both the pressure and the temperature are earthlike. In 1985, the Soviet Vega program sent two balloons to float in Venus' atmosphere at 54 km altitude.
- Titan, Saturn's largest moon, has a dense atmosphere of mostly nitrogen that is appropriate for ballooning. A use of Aerobots was proposed on Titan. Also the Titan Saturn System Mission included a balloon to circumnavigate Titan.
- "Air - Molecular Weight". www.engineeringtoolbox.com. Retrieved 2018-01-16.
- "AERONAUTICS: Helium vs. Hydrogen". TIME. 1924-03-10. Archived from the original on February 9, 2011. Retrieved 2013-11-24.
- "HeiDAS UH – Ein Heissdampfaerostat mit ultra-heiss-performance" (PDF). Aeroix.de. Retrieved 2012-10-21.
- "Gases - Density". www.engineeringtoolbox.com. Retrieved 2018-01-16.
- Tom D. Crouch (2009). Lighter Than Air
- Sean A. Barton (21 October 2009). "Stability Analysis of an Inflatable Vacuum Chamber". Journal of Applied Mechanics. 75 (4): 041010. arXiv:physics/0610222. Bibcode:2008JAM....75d1010B. doi:10.1115/1.2912742.
- CNN, Richard Stenger. "CNN.com - NASA's 'frozen smoke' named lightest solid - May 9, 2002". edition.cnn.com. Retrieved 2018-01-16.
- Administrator, NASA Content (2015-04-15). "Aerogels: Thinner, Lighter, Stronger". NASA. Retrieved 2018-01-16.
- Grommo (2008-06-20), SEAgel Aerogel lighter than air solid. Not a UFO, retrieved 2018-01-16
- "New carbon nanotube struructure aerographite is lightest material champ". Phys.org. doi:10.1002/adma.201200491. Retrieved 2013-11-24.
- "Aerographit: Leichtestes Material der Welt entwickelt - SPIEGEL ONLINE" (in German). Spiegel.de. 2012-07-11. Retrieved 2013-11-24.
- "Exploring Mars With Balloons". Spacedaily.com. Retrieved 2012-10-21.