Lead azide (Pb(N3)2) is an inorganic compound. More so than other azides, Pb(N
2 is explosive. It is used in detonators to initiate secondary explosives. In a commercially usable form, it is a white to buff powder.
3D model (JSmol)
CompTox Dashboard (EPA)
|Melting point||190 °C (374 °F; 463 K) decomposes, explodes at 350 °C|
|2.3 g/100 mL (18 °C) |
9.0 g/100 mL (70 °C)
|Solubility||Very soluble in acetic acid|
Insoluble in ammonia solution, NH4OH
Std enthalpy of
|Detonation velocity||5180 m/s|
|Main hazards||Harmful, explosive|
|GHS signal word||Danger|
|H200, H302, H332, H360, H373, H400, H410|
|350 °C (662 °F; 623 K)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Preparation and handlingEdit
Thickeners such as dextrin or polyvinyl alcohol are often added to the solution to stabilize the precipitated product. In fact, it is normally shipped in a dextrinated solution that lowers its sensitivity.
Lead azide in its pure form was first prepared by Theodor Curtius in 1891. Due to sensitivity and stability concerns, the dextrinated form of lead azide (MIL-L-3055) was developed in the 1920s and 1930s with large scale production by DuPont Co beginning in 1932. Detonator development during World War II resulted in the need for a form of lead azide with a more brisant output. RD-1333 lead azide (MIL-DTL-46225), a version of lead azide with sodium carboxymethylcellulose as a precipitating agent, was developed to meet that need. The Vietnam War saw an accelerated need for lead azide and it was during this time that Special Purpose Lead Azide (MIL-L-14758) was developed; the US government also began stockpiling lead azide in large quantities. After the Vietnam War, the use of lead azide dramatically decreased. Due to the size of the US stockpile, the manufacture of lead azide in the US ceased completely by the early 1990s. In the 2000s, concerns about the age and stability of stockpiled lead azide led the US government to investigate methods to dispose of its stockpiled lead azide and obtain new manufacturers.
Lead azide is highly sensitive and usually handled and stored under water in insulated rubber containers. It will explode after a fall of around 150 mm (6 in) or in the presence of a static discharge of 7 millijoules. Its detonation velocity is around 5,180 m/s (17,000 ft/s).
Lead azide has immediate deflagration to detonation transition (DDT), meaning that even small amounts undergo full detonation (after being hit by flame or static electricity).
Lead azide reacts with copper, zinc, cadmium, or alloys containing these metals to form other azides. For example, copper azide is even more explosive and too sensitive to be used commercially.
Lead azide was a component of the six .22 caliber Devastator rounds fired from a Röhm RG-14 revolver by John Hinckley, Jr. in his assassination attempt on U.S. President Ronald Reagan on March 30, 1981. The rounds consisted of lead azide centers with lacquer-sealed aluminum tips designed to explode upon impact. None of the bullets exploded in any of the victims.
- Pradyot, Patnaik (2003). Handbook of Inorganic Chemicals. The McGraw-Hill Companies, Inc. ISBN 0-07-049439-8.
- CID 61600 from PubChem
- "Safety Data Sheet of Electronic Detonators, Division 1.4" (PDF). ocsresponds.com. Owen Oil Tools LP. 2014-03-21. Retrieved 2014-06-09.
- Keller, J.J. (1978). Hazardous Materials Guide: Suppl, Issue 4. Abel Guerrero.
- Jacques Boileau, Claude Fauquignon, Bernard Hueber and Hans H. Meyer (2009). "Explosives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a10_143.pub2.CS1 maint: multiple names: authors list (link)
- "λ » LambdaSyn – Synthese von Bleiazid". www.lambdasyn.org.
- Verneker, V. R. Pai; Forsyth, Arthur C. (1968). "Mechanism for controlling the reactivity of lead azide". The Journal of Physical Chemistry. 72: 111. doi:10.1021/j100847a021.
- Fedoroff, Basil T.; Henry A. Aaronson; Earl F. Reese; Oliver E. Sheffield; George D. Clift (1960). Encyclopedia of Explosives and Related Items (Vol. 1). US Army Research and Development Command TACOM, ARDEC.
- Fair, Harry David; Walker, Raymond F. (1977). Energetic Materials, Technology of the Inorganic Azides. 2. Plenum Press.
- "Primary (Initiating) Explosives". www.tpub.com. Retrieved 2017-02-13.
- Lazari, Gerasimi; Stamatatos, Theocharis C.; Raptopoulou, Catherine P.; Psycharis, Vassilis; Pissas, Michael; Perlepes, Spyros P.; Boudalis, Athanassios K. (2009-04-13). "A metamagnetic 2D copper(II)-azide complex with 1D ferromagnetism and a hysteretic spin-flop transition". Dalton Transactions (17). doi:10.1039/B823423J. ISSN 1477-9234.
- The Exploding Bullets, by Pete Barley and Charles Babcock, Washington Post, 4 Apr, 1981. Retrieved 28 February 2007.
|Wikimedia Commons has media related to Lead(II) azide.|
Salts and covalent derivatives of the azide ion