(Redirected from Keccak)

SHA-3 (Secure Hash Algorithm 3) is the latest member of the Secure Hash Algorithm family of standards, released by NIST on August 5, 2015.[4][5] Although part of the same series of standards, SHA-3 is internally different from the MD5-like structure of SHA-1 and SHA-2.

Secure Hash Algorithms
hash functions · SHA · DSA
Main standards
SHA-0 · SHA-1 · SHA-2 · SHA-3
DesignersGuido Bertoni, Joan Daemen, Michaël Peeters, and Gilles Van Assche.
First published2015
Series(SHA-0), SHA-1, SHA-2, SHA-3
CertificationFIPS PUB 202
Digest sizesarbitrary
Structuresponge construction
Speed12.6 cpb on a typical x86-64-based machine for Keccak-f[1600] plus XORing 1024 bits,[1] which roughly corresponds to SHA2-256.
Best public cryptanalysis
Preimage attack on Keccak-512 reduced to 8 rounds, requiring 2511.5 time and 2508 memory.[2] Zero-sum distinguishers exist for the full 24-round Keccak-f[1600], though they cannot be used to attack the hash function itself[3]

SHA-3 is a subset of the broader cryptographic primitive family Keccak (/ˈkɛæk/ or /ˈkɛɑːk/),[6][7] designed by Guido Bertoni, Joan Daemen, Michaël Peeters, and Gilles Van Assche, building upon RadioGatún. Keccak's authors have proposed additional uses for the function, not (yet) standardized by NIST, including a stream cipher, an authenticated encryption system, a "tree" hashing scheme for faster hashing on certain architectures,[8][9] and AEAD ciphers Keyak and Ketje.[10][11]

Keccak is based on a novel approach called sponge construction.[12] Sponge construction is based on a wide random function or random permutation, and allows inputting ("absorbing" in sponge terminology) any amount of data, and outputting ("squeezing") any amount of data, while acting as a pseudorandom function with regard to all previous inputs. This leads to great flexibility.

NIST does not currently plan to withdraw SHA-2 or remove it from the revised Secure Hash Standard. The purpose of SHA-3 is that it can be directly substituted for SHA-2 in current applications if necessary, and to significantly improve the robustness of NIST's overall hash algorithm toolkit.[13]

The creators of the Keccak algorithms and the SHA-3 functions suggest using the faster function KangarooTwelve with adjusted parameters and a new tree hashing mode without extra overhead for small message sizes.


The Keccak algorithm is the work of Guido Bertoni, Joan Daemen (who also co-designed the Rijndael cipher with Vincent Rijmen), Michael Peeters, and Gilles Van Assche. It is based on earlier hash function designs PANAMA and RadioGatún. PANAMA was designed by Daemen and Craig Clapp in 1998. RadioGatún, a successor of PANAMA, was designed by Daemen, Peeters, and Van Assche, and was presented at the NIST Hash Workshop in 2006.[14] The reference implementation source code was dedicated to public domain via CC0 waiver.[15]

In 2006 NIST started to organize the NIST hash function competition to create a new hash standard, SHA-3. SHA-3 is not meant to replace SHA-2, as no significant attack on SHA-2 has been demonstrated. Because of the successful attacks on MD5, SHA-0 and SHA-1,[16][17] NIST perceived a need for an alternative, dissimilar cryptographic hash, which became SHA-3.

After a setup period, admissions were to be submitted by the end of 2008. Keccak was accepted as one of the 51 candidates. In July 2009, 14 algorithms were selected for the second round. Keccak advanced to the last round in December 2010.[18]

During the competition, entrants were permitted to "tweak" their algorithms to address issues that were discovered. Changes that have been made to Keccak are:[19][20]

  • The number of rounds was increased from 12 + ℓ to 12 + 2ℓ to be more conservative about security.
  • The message padding was changed from a more complex scheme to the simple 10*1 pattern described below.
  • The rate r was increased to the security limit, rather than rounding down to the nearest power of 2.

On October 2, 2012, Keccak was selected as the winner of the competition.[6]

In 2014, the NIST published a draft FIPS 202 "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions".[21] FIPS 202 was approved on August 5, 2015.[22]

On August 5, 2015 NIST announced that SHA-3 had become a hashing standard.[23]


The sponge construction for hash functions. Pi are input, Zi are hashed output. The unused "capacity" c should be twice the desired resistance to collision or preimage attacks.

SHA-3 uses the sponge construction,[12] in which data is "absorbed" into the sponge, then the result is "squeezed" out. In the absorbing phase, message blocks are XORed into a subset of the state, which is then transformed as a whole using a permutation function  . In the "squeeze" phase, output blocks are read from the same subset of the state, alternated with the state transformation function  . The size of the part of the state that is written and read is called the "rate" (denoted  ), and the size of the part that is untouched by input/output is called the "capacity" (denoted  ). The capacity determines the security of the scheme. The maximum security level is half the capacity.

Given an input bit string  , a padding function  , a permutation function   that operates on bit blocks of width  , a rate   and an output length  , we have capacity   and the sponge construction  , yielding a bit string   of length  , works as follows:[24]:18

  • pad the input N using the pad function, yielding a padded bit string P with a length divisible by   (such that   is integer)
  • break P into n consecutive r-bit pieces P0, ..., Pn−1
  • initialize the state S to a string of b zero bits
  • absorb the input into the state: for each block Pi:
    • extend Pi at the end by a string of c zero bits, yielding one of length b
    • XOR that with S
    • apply the block permutation f to the result, yielding a new state S
  • initialize Z to be the empty string
  • while the length of Z is less than d:
    • append the first r bits of S to Z
    • if Z is still less than d bits long, apply f to S, yielding a new state S
  • truncate Z to d bits

The fact that the internal state S contains c additional bits of information in addition to what is output to Z prevents the length extension attacks that SHA-2, SHA-1, MD5 and other hashes based on the Merkle–Damgård construction are susceptible to.

In SHA-3, the state S consists of a 5 × 5 array of w-bit words (with w = 64), b = 5 × 5 × w = 5 × 5 × 64 = 1600 bits total. Keccak is also defined for smaller power-of-2 word sizes w down to 1 bit (total state of 25 bits). Small state sizes can be used to test cryptanalytic attacks, and intermediate state sizes (from w = 8, 200 bits, to w = 32, 800 bits) can be used in practical, lightweight applications.[10][11]

For SHA-3-224, SHA-3-256, SHA-3-384, and SHA-3-512 instances, r is greater than d, so there is no need for additional block permutations in the squeezing phase; the leading d bits of the state are the desired hash. However, SHAKE-128 and SHAKE-256 allow an arbitrary output length, which is useful in applications such as optimal asymmetric encryption padding.


To ensure the message can be evenly divided into r-bit blocks, padding is required. SHA-3 uses the pattern 10*1 in its padding function: a 1 bit, followed by zero or more 0 bits (maximum r − 1) and a final 1 bit.

The maximum of r − 1 zero bits occurs when the last message block is r − 1 bits long. Then another block is added after the initial 1 bit, containing r − 1 zero bits before the final 1 bit.

The two 1 bits will be added even if the length of the message is already divisible by r.[24]:5.1 In this case, another block is added to the message, containing a 1 bit, followed by a block of r − 2 zero bits and another 1 bit. This is necessary so that a message with length divisible by r ending in something that looks like padding does not produce the same hash as the message with those bits removed.

The initial 1 bit is required so messages differing only in a few additional 0 bits at the end do not produce the same hash.

The position of the final 1 bit indicates which rate r was used (multi-rate padding), which is required for the security proof to work for different hash variants. Without it, different hash variants of the same short message would be the same up to truncation.

The block permutationEdit

The block transformation f, which is Keccak-f[1600] for SHA-3, is a permutation that uses XOR, AND and NOT operations, and is designed for easy implementation in both software and hardware.

It is defined for any power-of-two word size, w = 2 bits. The main SHA-3 submission uses 64-bit words, = 6.

The state can be considered to be a 5 × 5 × w array of bits. Let a[i][ j][k] be bit (5i + j) × w + k of the input, using a little-endian bit numbering convention and row-major indexing. I.e. i selects the row, j the column, and k the bit.

Index arithmetic is performed modulo 5 for the first two dimensions and modulo w for the third.

The basic block permutation function consists of 12 + 2 rounds of five steps:

θ (theta)
Compute the parity of each of the 5w (320, when w = 64) 5-bit columns, and exclusive-or that into two nearby columns in a regular pattern. To be precise, a[i][ j][k] ← a[i][ j][k] ⊕ parity(a[0...4][ j−1][k]) ⊕ parity(a[0...4][ j+1][k−1])
ρ (rho)
Bitwise rotate each of the 25 words by a different triangular number 0, 1, 3, 6, 10, 15, .... To be precise, a[0][0] is not rotated, and for all 0 ≤ t < 24, a[i][ j][k] ← a[i][ j][k−(t+1)(t+2)/2], where  .
π (pi)
Permute the 25 words in a fixed pattern. a[3i+2j][i] ← a[ i][j].
χ (chi)
Bitwise combine along rows, using xx ⊕ (¬y & z). To be precise, a[i][ j][k] ← a[i][ j][k] ⊕ (¬a[i][ j+1][k] & a[i][ j+2][k]). This is the only non-linear operation in SHA-3.
ι (iota)
Exclusive-or a round constant into one word of the state. To be precise, in round n, for 0 ≤ m, a[0][0][2m−1] is XORed with bit m + 7n of a degree-8 LFSR sequence. This breaks the symmetry that is preserved by the other steps.


The speed of SHA-3 hashing of long messages is dominated by the computation of f = Keccak-f[1600] and XORing S with the extended Pi, an operation on b = 1600 bits. However, since the last c bits of the extended Pi are 0 anyway, and XOR with 0 is a NOP, it is sufficient to perform XOR operations only for r bits (r = 1600 − 2 × 224 = 1152 bits for SHA3-224, 1088 bits for SHA3-256, 832 bits for SHA3-384 and 576 bits for SHA3-512). The lower r is (and, conversely, the higher c = br = 1600 − r), the less efficient but more secure the hashing becomes since fewer bits of the message can be XORed into the state (a quick operation) before each application of the computationally expensive f. The authors report the following speeds for software implementations of Keccak-f[1600] plus XORing 1024 bits,[1] which roughly corresponds to SHA3-256:

  • 57.4 cpb on IA-32, Intel Pentium 3[25]
  • 41 cpb on IA-32+MMX, Intel Pentium 3
  • 20 cpb on IA-32+SSE, Intel Core 2 Duo or AMD Athlon 64
  • 12.6 cpb on a typical x86-64-based machine
  • 6–7 cpb on IA-64[26]

For the exact SHA3-256 on x86-64, Bernstein measures 11.7–12.25 cpb depending on the CPU.[27]:7 SHA-3 has been criticized for being slow on instruction set architectures (CPUs) which do not have instructions meant specially for computing Keccak functions faster – SHA2-512 is more than twice as fast as SHA3-512, and SHA-1 is more than three times as fast on an Intel Skylake processor clocked at 3.2 GHz.[28] The authors have reacted to this criticism by suggesting to use SHAKE128 and SHAKE256 instead of SHA3-256 and SHA3-512, at the expense of cutting the preimage resistance in half (but while keeping the collision resistance). With this, performance is on par with SHA2-256 and SHA2-512.

However, in hardware implementations, SHA-3 is notably faster than all other finalists,[29] and also faster than SHA-2 and SHA-1.[28]

ARM's ARMv8[30] and IBM's s390x architectures already (as of 2018) include special instructions which enable Keccak algorithms to execute faster.


The NIST standard defines the following instances, for message M and output length d:[24]:20,23

Instance Output
size d
Rate r
= block size
Capacity c Definition Security strengths in bits
Collision Preimage 2nd preimage
SHA3-224(M) 224 1152 448 Keccak[448](M || 01, 224) 112 224 224
SHA3-256(M) 256 1088 512 Keccak[512](M || 01, 256) 128 256 256
SHA3-384(M) 384 832 768 Keccak[768](M || 01, 384) 192 384 384
SHA3-512(M) 512 576 1024 Keccak[1024](M || 01, 512) 256 512 512
SHAKE128(M, d) d 1344 256 Keccak[256](M || 1111, d) min(d/2,128) ≥min(d,128) min(d,128)
SHAKE256(M, d) d 1088 512 Keccak[512](M || 1111, d) min(d/2,256) ≥min(d,256) min(d,256)

With the following definitions

  • Keccak[c](N, d) = sponge[Keccak-f[1600], pad10*1, r](N, d)[24]:20
  • Keccak-f[1600] = Keccak-p[1600, 24][24]:17
  • c is the capacity
  • r is the rate = 1600 − c
  • N is the input bit string

Note that the appended postfixes are written as bit strings, not hexadecimal digits.

The SHA-3 instances are the drop-in replacements for SHA-2, with identical security claims. SHAKE instances are so called XOF's, Extendable Output Functions. For example, SHAKE128(M, 256) can be used as a hash function with a 256-bit length and 128-bit overall security.

Note that all instances append some bits to the message, the rightmost of which represent the domain separation suffix. The purpose of this is to ensure that it is not possible to construct messages that produce the same hash output for different applications of the Keccak hash function. The following domain separation suffixes exist:[24][31]

Suffix Meaning
...0 reserved for future use
01 SHA-3
...11 RawSHAKE

RawSHAKE is the basis for the Sakura coding for tree hashing, which has not been standardized yet. However, the SHAKE suffix has been carefully chosen so that it is forward compatible with Sakura. Sakura appends 0 for a chaining hop or 1 for a message, then 10*0 for a non-final (inner) node or 1 for a final node, before it applies RawSHAKE. Sequential hashing corresponds to a hop tree with a single message node, which means that 11 is appended to the message before RawSHAKE is applied. Thus, the SHAKE XOFs append 1111 to the message, i.e., 1 for message, 1 for final node, and 11 for the RawSHAKE domain separation suffix.[31]:16

Since 10*1 padding always adds at least two bits, in byte-aligned libraries there are always six unused zero bits. Therefore, these appended extra bits never make the padded message longer.[citation needed]

Additional instancesEdit

In December 2016 NIST published a new document, NIST SP.800-185,[32] describing additional SHA-3 derived functions:

Instance Description
cSHAKE128(X, L, N, S) A version of SHAKE supporting explicit domain separation via customization parameters.
cSHAKE256(X, L, N, S)
KMAC128(K, X, L, S) A keyed hash function based on Keccak. Can also be used without a key as a regular hash function.
KMAC256(K, X, L, S)
KMACXOF128(K, X, L, S)
KMACXOF256(K, X, L, S)
TupleHash128(X, L, S) A function for hashing tuples of strings. The output of this function depends on both the contents and the sequence of input strings.
TupleHash256(X, L, S)
TupleHashXOF128(X, L, S)
TupleHashXOF256(X, L, S)
ParallelHash128(X, B, L, S) A function designed to exploit parallelism in modern processors for faster hashing. Unlike KangarooTwelve, does not use reduced-round Keccak.
ParallelHash256(X, B, L, S)
ParallelHashXOF128(X, B, L, S)
ParallelHashXOF256(X, B, L, S)

• X is the main input bit string. It may be of any length, including zero.

• L is an integer representing the requested output length in bits.

• N is a function-name bit string, used by NIST to define functions based on cSHAKE. When no function other than cSHAKE is desired, N is set to the empty string.

• S is a customization bit string. The user selects this string to define a variant of the function. When no customization is desired, S is set to the empty string.

• K is a key bit string of any length, including zero.

• B is the block size in bytes for parallel hashing. It may be any integer such that 0 < B < 22040.

Later developmentsEdit

Tree HashingEdit

In 2016 the same team that made the SHA-3 functions and the Keccak algorithm introduced faster reduced-rounds (reduced to 12 and 14 rounds, from the 24 in SHA-3) alternatives which can exploit the availability of parallel execution because of using tree hashing: KangarooTwelve and MarsupilamiFourteen.[33]

These functions differ from ParallelHash, the FIPS standardized Keccak-based parallelizable hash function, with regard to the parallelism, in that they are faster than ParallelHash for small message sizes.

The reduced number of rounds is justified by the huge cryptanalytic effort focused on Keccak which did not produce practical attacks on anything close to twelve-round Keccak. These higher-speed algorithms are not part of SHA-3 (as they are a later development), and thus are not FIPS compliant; but they are just as secure as the SHA-3 functions,[citation needed] because they use the same Keccak permutation and there are no attacks on 12-round Keccak.

KangarooTwelve is a higher-performance reduced-round (from 24 to 12 rounds) version of Keccak which claims to have 128 bits of security[34] while having performance as high as 0.55 cycles per byte on a Skylake CPU.[35] This algorithm is an IETF RFC draft.[36]

MarsupilamiFourteen, a slight variation on KangarooTwelve, uses 14 rounds of the Keccak permutation and claims 256 bits of security. Note that 256-bit security is not more useful in practice than 128-bit security, but may be required by some standards.[34] 128 bits are already sufficient to defeat brute-force attacks on current hardware, so having 256-bit security does not add practical value, unless the user is worried about significant advancements in the speed of classical computers. For resistance against quantum computers, see below.

KangarooTwelve and MarsupilamiFourteen are Extendable-Output Functions, similar to SHAKE, therefore they generate closely related output for a common message with different output length (the longer output is an extension of the shorter output). Such property is not exhibited by hash functions such as SHA-3 or ParallelHash (except of XOF variants).[24]

The Farfalle ConstructionEdit

In 2016, the Keccak team released a different construction called Farfalle construction, and Kravatte, an instance of Farfalle using the Keccak-p permutation.[37], as well as two authenticated encryption algorithms Kravatte-SANE and Kravatte-SANSE[38]

Security against quantum attacksEdit

There is a general result (Grover's algorithm) that quantum computers can perform a structured preimage attack in  , while a classical brute-force attack needs 2d. A structured preimage attack implies a second preimage attack[39] and thus a collision attack. A quantum computer can also perform a birthday attack, thus break collision resistance, in  [40] (although that is disputed[41]). Noting that the maximum strength can be  , this gives the following upper[42] bounds on the quantum security of SHA-3:

Instance Security strengths in bits
(Brassard et al.)
Preimage 2nd preimage
SHA3-224(M) 74⅔ 112 112 112
SHA3-256(M) 85⅓ 128 128 128
SHA3-384(M) 128 192 192 192
SHA3-512(M) 170⅔ 256 256 256
SHAKE128(M, d) min(d/3,128) min(d/2,128) ≥min(d/2,128) min(d/2,128)
SHAKE256(M, d) min(d/3,256) min(d/2,256) ≥min(d/2,256) min(d/2,256)

It has been shown that the Merkle–Damgård construction, as used by SHA-2, is collapsing and, by consequence, quantum collision-resistant,[43] but for the sponge construction used by SHA-3, the authors provide proofs only for the case that the block function f is not efficiently invertible; Keccak-f[1600], however, is efficiently invertible, and so their proof does not apply.[44]

Capacity change controversyEdit

In February 2013 at the RSA Conference, and then in August 2013 at CHES, NIST announced they would select different values for the capacity, i.e. the security parameter, for the SHA-3 standard, compared to the submission.[45][46] The changes caused some turmoil.

The hash function competition called for hash functions at least as secure as the SHA-2 instances. It means that a d-bit output should have d/2-bit resistance to collision attacks and d-bit resistance to preimage attacks, the maximum achievable for d bits of output. Keccak's security proof allows an adjustable level of security based on a "capacity" c, providing c/2-bit resistance to both collision and preimage attacks. To meet the original competition rules, Keccak's authors proposed c=2d. The announced change was to accept the same d/2-bit security for all forms of attack and standardize c=d. This would have sped up Keccak by allowing an additional d bits of input to be hashed each iteration. However, the hash functions would not have been drop-in replacements with the same preimage resistance as SHA-2 anymore; it would have been cut in half, making it vulnerable to advances in quantum computing, which effectively would cut it in half once more.[39]

In September 2013, Daniel J. Bernstein suggested on the NIST hash-forum mailing list[47] to strengthen the security to the 576-bit capacity that was originally proposed as the default Keccak, in addition to and not included in the SHA-3 specifications.[48] This would have provided at least a SHA3-224 and SHA3-256 with the same preimage resistance as their SHA-2 predecessors, but SHA3-384 and SHA3-512 would have had significantly less preimage resistance than their SHA-2 predecessors. In late September, the Keccak team responded by stating that they had proposed 128-bit security by setting c = 256 as an option already in their SHA-3 proposal.[49] Although the reduced capacity was justifiable in their opinion, in the light of the negative response, they proposed raising the capacity to c = 512 bits for all instances. This would be as much as any previous standard up to the 256-bit security level, while providing reasonable efficiency,[50] but not the 384-/512-bit preimage resistance offered by SHA2-384 and SHA2-512. The authors tried to justify that with the claim that "claiming or relying on security strength levels above 256 bits is meaningless".

In early October 2013, Bruce Schneier criticized NIST's decision on the basis of its possible detrimental effects on the acceptance of the algorithm, saying:

There is too much mistrust in the air. NIST risks publishing an algorithm that no one will trust and no one (except those forced) will use.[51]

Paul Crowley, a cryptographer and senior developer at an independent software development company, expressed his support of the decision, saying that Keccak is supposed to be tunable and there is no reason for different security levels within one primitive. He also added:

Yes, it's a bit of a shame for the competition that they demanded a certain security level for entrants, then went to publish a standard with a different one. But there's nothing that can be done to fix that now, except re-opening the competition. Demanding that they stick to their mistake doesn't improve things for anyone.[52]

There was also some confusion that internal changes were made to Keccak. The Keccak team clarified this, stating that NIST's proposal for SHA-3 is a subset of the Keccak family, for which one can generate test vectors using their reference code submitted to the contest, and that this proposal was the result of a series of discussions between them and the NIST hash team.[53] Also, Bruce Schneier corrected his earlier statement, saying:

I misspoke when I wrote that NIST made "internal changes" to the algorithm. That was sloppy of me. The Keccak permutation remains unchanged. What NIST proposed was reducing the hash function's capacity in the name of performance. One of Keccak's nice features is that it's highly tunable.[51]

In response to the controversy, in November 2013 John Kelsey of NIST proposed to go back to the original c = 2d proposal for all SHA-2 drop-in replacement instances.[54] The reversion was confirmed in the April 2014 draft.[55] This proposal was implemented in the final release standard in August 2015.[4]

The reduced-capacity forms were published as SHAKE128 and SHAKE256, where the number indicates the security level and the number of bits of output is variable, but should be twice as large as the required collision resistance.

Examples of SHA-3 variantsEdit

The following hash values are from[56]

SHAKE128("", 256)
SHAKE256("", 512)

Changing a single bit causes each bit in the output to change with 50% probability, demonstrating an avalanche effect:

SHAKE128("The quick brown fox jumps over the lazy dog", 256)
SHAKE128("The quick brown fox jumps over the lazy dof", 256)

Comparison of SHA functionsEdit

In the table below, internal state means the number of bits that are carried over to the next block.

Comparison of SHA functions
Algorithm and variant Output size
Internal state size
Block size
Rounds Operations Security (in bits) against collision attacks Capacity
against length extension attacks
Performance on Skylake (median cpb)[57] First published
long messages 8 bytes
MD5 (as reference) 128 128
(4 × 32)
512 64 And, Xor, Rot, Add (mod 232), Or ≤18
(collisions found)[58]
0 4.99 55.00 1992
SHA-0 160 160
(5 × 32)
512 80 And, Xor, Rot, Add (mod 232), Or <34
(collisions found)
0 ≈ SHA-1 ≈ SHA-1 1993
SHA-1 <63
(collisions found)[59]
3.47 52.00 1995
SHA-2 SHA-224
(8 × 32)
512 64 And, Xor, Rot, Add (mod 232), Or, Shr 112
(8 × 64)
1024 80 And, Xor, Rot, Add (mod 264), Or, Shr 192
128 (≤ 384)
≈ SHA-384 ≈ SHA-384 2012
SHA-3 SHA3-224
(5 × 5 × 64)
24[60] And, Xor, Rot, Not 112
d (arbitrary)
d (arbitrary)
min(d/2, 128)
min(d/2, 256)

Optimized implementation using AVX-512VL (i.e. from OpenSSL, running on Skylake-X CPUs) of SHA3-256 do achieve about 6.4 cycles per byte for large messages[61], and about 7.8 cycles per byte when using AVX2 on Skylake CPUs.[62]. Performance on other x86, Power and ARM CPUs depending on instructions used, and exact CPU model varies from about 8 to 15 cycles per byte[63][64][65], with some older x86 CPUs up to 25-40 cycles per byte.[66]


Below is a list of cryptography libraries that support SHA-3:

Hardware accelerationEdit

Apple A13 ARMv8 six-core SoC CPU cores have support[67] for accelerating SHA-3 (and SHA-512) using specialized instructions (EOR3, RAX1, XAR, BCAX) from ARMv8.2-SHA crypto extension set.[68]

Some software libraries use vectorization facilities of CPUs to accelerate usage of SHA-3. For example Crypto++ can use SSE2 on x86 for accelerating SHA3[69], and OpenSSL can use MMX, AVX-512 or AVX-512VL on many x86 systems too.[70]. Also POWER8 CPUs implement 2x64-bit vector rotate, defined in PowerISA 2.07, which can accelerate SHA-3 implementations somehow.[71] Most implementations for ARM doesn't use Neon vector instructions as it is slower than a scalar code, however it can be accelerated using SVE and SVE2 vector instructions (for example on Fujitsu A64FX CPU).[72]

Usage in protocolsEdit

See alsoEdit

  • Ethash – another Keccak-based hash


  1. ^ a b Keccak implementation overview Version 3.2, section 3.1
  2. ^ Morawiecki, Paweł; Pieprzyk, Josef; Srebrny, Marian (2013). Moriai, S (ed.). "Rotational Cryptanalysis of Round-Reduced Keccak" (PDF). Fast Software Encryption Lecture Notes in Computer Science. Lecture Notes in Computer Science. 8424: 241–262. doi:10.1007/978-3-662-43933-3_13. ISBN 978-3-662-43932-6. Archived (PDF) from the original on January 8, 2013. Retrieved February 8, 2019.
  3. ^ Bertoni, Guido; Daemen, Joan; Peeters, Michaël; van Assche, Giles (January 14, 2011). "The Keccak SHA-3 submission" (PDF). Archived (PDF) from the original on August 19, 2011. Retrieved February 9, 2014.
  4. ^ a b Hernandez, Paul (August 5, 2015). "NIST Releases SHA-3 Cryptographic Hash Standard". NIST.
  5. ^ Dworkin, Morris J. (August 4, 2015). "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions". Federal Inf. Process. STDS. (NIST FIPS) – 202.
  6. ^ a b "NIST Selects Winner of Secure Hash Algorithm (SHA-3) Competition". NIST. October 2, 2012. Retrieved October 2, 2012.
  7. ^ Cruz, José R.C. (May 7, 2013). "Keccak: The New SHA-3 Encryption Standard". Dr. Dobbs.
  8. ^ Guido Bertoni; Joan Daemen; Michaël Peeters; Gilles Van Assche. "The Keccak sponge function family: Specifications summary". Retrieved May 11, 2011.
  9. ^ "Third-Round Report of the SHA-3 Cryptographic Hash Algorithm Competition" (PDF). November 2012. doi:10.6028/NIST.IR.7896. Retrieved February 29, 2020. Sections (mentioning "tree mode"), 6.2 ("other features", mentioning authenticated encryption), and 7 (saying "extras" may be standardized in the future).
  10. ^ a b Bertoni, Guido; Daemen, Joan; Peeters, Michaël; Van Assche, Gilles; Van Keer, Ronny (March 13, 2014). "CAESAR submission: Ketje v1" (PDF). Retrieved February 29, 2020.
  11. ^ a b Bertoni, Guido; Daemen, Joan; Peeters, Michaël; Van Assche, Gilles; Van Keer, Ronny (March 13, 2014). "CAESAR submission: Keyak v1" (PDF). Retrieved February 29, 2020.
  12. ^ a b Guido Bertoni, Joan Daemen, Michaël Peeters and Gilles Van Assche. "Sponge Functions". Ecrypt Hash Workshop 2007.CS1 maint: uses authors parameter (link)
  13. ^ "Announcing Request for Candidate Algorithm Nominations for a New Cryptographic Hash Algorithm (SHA-3) Family [U.S. Federal Register Vol. 72 No. 212)]" (PDF). November 2, 2007. Archived (PDF) from the original on March 31, 2011. Retrieved July 18, 2017.
  14. ^ Bertoni, Guido; Daemen, Joan; Peeters, Michaël; Van Assche, Gilles. "The road from Panama to Keccak via RadioGatún" (PDF). Retrieved February 29, 2020.
  15. ^ mainReference.c "The Keccak sponge function, designed by Guido Bertoni, Joan Daemen, Michaël Peeters and Gilles Van Assche. For more information, feedback or questions, please refer to our website:[permanent dead link] by the designers, hereby denoted as "the implementer". To the extent possible under law, the implementer has waived all copyright and related or neighboring rights to the source code in this file."
  16. ^ Stevens, Marc; Bursztein, Elie; Karpman, Pierre; Albertini, Ange; Markov, Yarik. "The first collision for full SHA-1" (PDF). Retrieved February 23, 2017.
  17. ^ Leurent, Gaëtan; Peyrin, Thomas. "SHA-1 is a Shambles". Retrieved January 8, 2020.
  18. ^ "NIST Computer Security Division – The SHA-3 Cryptographic Hash Algorithm Competition, November 2007 – October 2012". January 4, 2017.
  19. ^ "Keccak parameter changes for round 2". Keccak Team. September 22, 2009. Archived from the original on November 13, 2017. Retrieved February 29, 2020.
  20. ^ "Simplifying Keccak's padding rule for round 3". Keccak Team. January 17, 2011. Retrieved February 29, 2020.
  21. ^ "SHA-3 standardization". NIST. Retrieved April 16, 2015.
  22. ^ National Institute of Standards and Technology (August 5, 2015). "Federal Information Processing Standards: Permutation-Based Hash and Extendable-Output Functions, etc". Retrieved August 5, 2015.
  23. ^ "Announcing Approval of Federal Information Processing Standard (FIPS) 202, SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions, and Revision of the Applicability Clause of FIPS 180-4, Secure Hash Standard". August 5, 2015.
  24. ^ a b c d e f g NIST (August 2015). "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions" (PDF). doi:10.6028/NIST.FIPS.202. Retrieved February 29, 2020.
  25. ^ "about 41 cycles/byte [...] represents a 40% speedup compared to an implementation using only 32-bit instructions". By formula   we obtain  
  26. ^ Bertoni, Guido (May 29, 2012). Keccak implementation overview (PDF). p. 25. Retrieved November 3, 2018.
  27. ^ Bernstein, Daniel J. (January 4, 2012). "Optimization failures in SHA-3 software" (PDF). Retrieved February 29, 2020.
  28. ^ a b "Keccak Team".
  29. ^ Guo, Xu; Huang, Sinan; Nazhandali, Leyla; Schaumont, Patrick (August 2010), "Fair and Comprehensive Performance Evaluation of 14 Second Round SHA-3 ASIC Implementations" (PDF), NIST 2nd SHA-3 Candidate Conference: 12, retrieved February 18, 2011 Keccak is second only to Luffa, which did not advance to the final round.
  30. ^ ARM corporation, ARM architecture reference manual ARMv8, for ARMv8-A architecture profile, document ARM DDI 0487C.a (ID121917),
  31. ^ a b "Sakura: A Flexible Coding for Tree Hashing" (PDF). Keccak Team. 2014. Retrieved February 29, 2020.
  32. ^ SHA-3 Derived Functions: cSHAKE, KMAC, TupleHash and ParallelHash   This article incorporates text from this source, which is in the public domain.
  33. ^ "Keccak Team: KangarooTwelve". Keccak Team.
  34. ^ a b "KangarooTwelve: fast hashing based on Keccak-p" (PDF). International Association for Cryptologic Research. 2016.
  35. ^ "KangarooTwelve slides presented at ACNS 2018" (PDF). Keccak Team.
  36. ^ "draft-irtf-cfrg-kangarootwelve-00 - KangarooTwelve". IETF. Retrieved January 17, 2020.
  37. ^ Guido Bertoni, Joan Daemen, Seth Hoffert, Michaël Peeters, Gilles Van Assche, Ronny Van Keer. "Farfalle: parallel permutation-based cryptography".CS1 maint: uses authors parameter (link)
  38. ^ Guido Bertoni, Joan Daemen, Seth Hoffert, Michaël Peeters, Gilles Van Assche, Ronny Van Keer. "The authenticated encryption schemes Kravatte-SANE and Kravatte-SANSE".CS1 maint: uses authors parameter (link)
  39. ^ a b "Abstract" (PDF).
  40. ^ Brassard, Gilles; Høyer, Peter; Tapp, Alain (1998). "Quantum cryptanalysis of hash and claw-free functions". Abstract. Lecture Notes in Computer Science. 1380. pp. 163–169. arXiv:quant-ph/9705002. doi:10.1007/BFb0054319. ISBN 978-3-540-64275-6.
  41. ^ "Cost Analysis" (PDF).
  42. ^ "Collision problem" (PDF).
  43. ^ "Paper" (PDF). 2016.
  44. ^ "Abstract" (PDF). 2017.
  45. ^ John Kelsey. "SHA3, Where We've Been, Where We're Going" (PDF). RSA Conference 2013.
  46. ^ John Kelsey. "SHA3, Past, Present, and Future". CHES 2013.
  47. ^ "NIST hash forum mailing list". January 4, 2017.
  48. ^ "The Keccak SHA-3 submission" (PDF). January 14, 2011. Retrieved February 8, 2014.
  49. ^ "On 128-bit security".
  50. ^ "A concrete proposal". October 2, 2013.
  51. ^ a b "Schneier on Security: Will Keccak = SHA-3?".
  52. ^ "LShift: Why I support the US Government making a cryptography standard weaker".
  53. ^ "Yes, this is Keccak!".
  54. ^ "Moving Forward with SHA-3" (PDF).
  55. ^ NIST Computer Security Division (CSD). "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions" (PDF). NIST.
  56. ^ " – Computer Security Division – Computer Security Resource Center". December 29, 2016.
  57. ^ "Measurements table".
  58. ^ Tao, Xie; Liu, Fanbao; Feng, Dengguo (2013). Fast Collision Attack on MD5 (PDF). Cryptology ePrint Archive (Technical report). IACR.
  59. ^ Stevens, Marc; Bursztein, Elie; Karpman, Pierre; Albertini, Ange; Markov, Yarik. The first collision for full SHA-1 (PDF) (Technical report). Google Research. Lay summaryGoogle Security Blog (February 23, 2017).
  60. ^ "The Keccak sponge function family". Retrieved January 27, 2016.
  61. ^ "openssl/openssl-". GitHub. Retrieved June 25, 2020.
  62. ^ "openssl/openssl -". GitHub.
  63. ^ "openssl/openssl -". GitHub. Retrieved June 25, 2020.
  64. ^ "openssl/openssl -". GitHub.
  65. ^ "openssl/openssl -". GitHub. Retrieved June 25, 2020.
  66. ^ "openssl/openssl -". GitHub. Retrieved June 25, 2020.
  67. ^ "llvm/llvm-project -". GitHub. Retrieved June 24, 2020.
  68. ^ "ARMv8 - ARM - WikiChip". Retrieved June 24, 2020.
  69. ^ "weidai11/cryptopp". GitHub. Retrieved June 25, 2020.
  70. ^ "openssl/openssl". GitHub. Retrieved June 25, 2020.
  71. ^ "openssl/openssl". GitHub.
  72. ^ "apple/llvm-project - lib/Target/AArch64/". GitHub. Retrieved June 25, 2020.

External linksEdit