Ford D2C platform
This article does not cite any sources. (November 2018) (Learn how and when to remove this template message)
The Ford D2C platform (for "D-class 2-door coupe" and primarily known as S197) is one of Ford's rear-wheel drive automobile platforms. The sole vehicle to utilize this platform was the 2005–2014 fifth-generation Ford Mustang and its Shelby GT500 derivatives.
|Ford D2C platform|
2010 Ford Mustang GT coupe
|Assembly||United State: Flat Rock, Michigan (Flat Rock Assembly)|
|Body and chassis|
|Body style(s)||2-door coupe|
|Vehicles||Ford Mustang (fifth generation)|
Shelby Mustang GT500
|Wheelbase||107.1 in (2,720.3 mm)|
|Predecessor||Ford Mustang (Fox/SN95)|
|Successor||Ford Mustang (S550)|
The platform basics are a MacPherson strut suspension in front and 3-link solid axle in the rear with a Panhard rod. Unlike previous Special Vehicle Team (SVT) Mustang variations, the Shelby GT500 does not include independent rear suspension, but instead has a solid rear axle.
Considered a new platform by Ford Motor Company, D2C is loosely based on the Ford DEW platform which served as the basis for the Lincoln LS, Ford Thunderbird, and Jaguar S-Type. The 2005 S197 Mustang was originally designed to use a "Lite" version of the DEW98 platform, but while that plan was eventually scrapped as too expensive, most D2C platform development completed prior to that decision was retained. This led to the carryover of several DEW98 chassis components. These components include the floor pans, portions of the transmission tunnel, the front frame rails, and basic fuel tank design.
Differences between D2C and DEW98 are most noticeable in the suspension: The DEW98-based Lincoln LS uses a 4-wheel independent double wishbone suspension. The D2C platform's MacPherson strut front suspension and solid axle rear suspension are less expensive to produce than DEW's more complicated setup. D2C also shares components with other Ford platforms. These include Ford's global C1 platform, with which D2C shares front strut and rear trailing arm components.
A new generation was launched in Model Year 2015 with the new S550 platform.