The foot (pl. feet; abbreviation: ft; symbol: ′, the prime symbol) is a unit of length in the imperial and US customary systems of measurement. Since the International Yard and Pound Agreement of 1959, one foot is defined as 0.3048 meter exactly. In customary and imperial units, the foot comprises 12 inches and three feet compose a yard.
|Unit system||imperial/US units|
|1 ft in ...||... is equal to ...|
|imperial/US units|| 1/ yd|
|metric (SI) units||0.3048 m|
Historically the "foot" was a part of many local systems of units, including the Greek, Roman, Chinese, French, and English systems. It varied in length from country to country, from city to city, and sometimes from trade to trade. Its length was usually between 250 mm and 335 mm and was generally, but not always, subdivided into 12 inches or 16 digits.
The United States is the only industrialized nation that uses the international foot and the survey foot (a customary unit of length) in preference to the meter in its commercial, engineering, and standards activities. The foot is legally recognized in the United Kingdom; road signs must use imperial units (however, distances on road signs are always marked in miles or yards, not feet), while its usage is widespread among the British public as a measurement of height. The foot is recognized as an alternative expression of length in Canada officially defined as a unit derived from the meter although both the U.K. and Canada have partially metricated their units of measurement. The measurement of altitude in international aviation is one of the few areas where the foot is used outside the English-speaking world.
The length of the international foot corresponds to a human foot with shoe size of 13 (UK), 14 (US male), 15.5 (US female) or 46 (EU sizing).
Historically the human body has been used to provide the basis for units of length. The foot of a white male is typically about 15.3% of his height, giving a person of 160 centimetres (5 ft 3 in) a foot of 245 millimetres (9.6 in) and one of 180 centimetres (5 ft 11 in) a foot of 275 millimetres (10.8 in).
Archaeologists believe that the Egyptians, Ancient Indians and Mesopotamians preferred the cubit while the Romans and the Greeks preferred the foot. Under the Harappan linear measures, Indus cities during the Bronze Age used a foot of 13.2 inches (340 mm) and a cubit of 20.8 inches (530 mm). The Egyptian equivalent of the foot—a measure of four palms or 16 digits—was known as the djeser and has been reconstructed as about 30 cm (12 in).
The Greek foot (πούς, pous) had a length of 1⁄600 of a stadion, one stadion being about 181.2 m, therefore a foot being at the time about 302 mm. Its exact size varied from city to city and could range between 270 mm and 350 mm, but lengths used for temple construction appear to have been about 295 mm to 325 mm, the former being close to the size of the Roman foot.
The standard Roman foot (pes) was normally about 295.7 mm (97% of today's measurement), but in the provinces, the pes Drusianus (foot of Nero Claudius Drusus) was used, with a length of about 334 mm. (In reality, this foot predated Drusus.)
Originally both the Greeks and the Romans subdivided the foot into 16 digits, but in later years, the Romans also subdivided the foot into 12 unciae (from which both the English words "inch" and "ounce" are derived).
After the fall of the Roman Empire, some Roman traditions were continued but others fell into disuse. In AD 790 Charlemagne attempted to reform the units of measure in his domains. His units of length were based on the toise and in particular the toise de l'Écritoire, the distance between the fingertips of the outstretched arms of a man. The toise has 6 pieds (feet) each of 326.6 mm (12.86 in).
He was unsuccessful in introducing a standard unit of length throughout his realm: an analysis of the measurements of Charlieu Abbey shows that during the 9th century the Roman foot of 296.1 mm was used; when it was rebuilt in the 10th century, a foot of about 320 mm[Note 1] was used. At the same time, monastic buildings used the Carolingian foot of 340 mm.[Note 1]
Stand at the door of a church on a Sunday and bid 16 men to stop, tall ones and small ones, as they happen to pass out when the service is finished; then make them put their left feet one behind the other, and the length thus obtained shall be a right and lawful rood to measure and survey the land with, and the 16th part of it shall be the right and lawful foot.
The Neolithic long foot, first proposed by archeologists Mike Parker Pearson and Andrew Chamberlain, is based upon calculations from surveys of Phase 1 elements at Stonehenge. They found that the underlying diameters of the stone circles had been consistently laid out using multiples of a base unit amounting to 30 long feet, which they calculated to be 1.056 of a modern foot (0.3219m). Furthermore, this unit is identifiable in the dimensions of some stone lintels at the site and in the diameter of the "southern circle" at nearby Durrington Walls. Evidence that this unit was in widespread use across southern Britain is available from the Folkton Drums from Yorkshire (neolithic artifacts, made from chalk, with circumferences that exactly divide as integers into ten long feet) and a similar object excavated at Lavant, Sussex, again with a circumference divisible as a whole number into ten long feet.
The measures of Iron Age Britain are uncertain and proposed reconstructions such as the Megalithic Yard are controversial. Later Welsh legend credited Dyfnwal Moelmud with the establishment of their units, including a foot of 9 inches. The Belgic or North German foot of 335 mm (13.2 inches) was introduced to England either by the Belgic Celts during their invasions prior to the Romans or by the Anglo-Saxons in the 5th and 6th century.
Roman units were introduced following their invasion in AD 43. The Roman foot had been previously standardized by Agrippa at around 296 mm or 11.65 inches. Following the Roman withdrawal and Saxon invasions, the Roman foot continued to be used in the construction crafts while the Belgic foot was used for land measurement. Both the Welsh and Belgic feet seem to have been based on multiples of the barleycorn, but by as early as 950 the English kings seem to have (ineffectually) ordered measures to be based upon an iron yardstick at Winchester and then London. Henry I was said to have ordered a new standard to be based upon his own arm and, by the c. 1300 Act concerning the Composition of Yards and Perches traditionally credited to Edward I or II, the statute foot was a different measure exactly 10⁄11 of the old foot. The barleycorn, inch, ell, and yard were likewise shrunk, while rods and furlongs remained the same. The ambiguity over the state of the mile was resolved by the 1593 Act against Converting of Great Houses into Several Tenements and for Restraint of Inmates and Inclosures in and near about the City of London and Westminster, which codified the statute mile as comprising 5,280 feet. The differences among the various physical standard yards around the world, revealed by increasingly powerful microscopes, eventually led to the 1959 adoption of the international foot defined in terms of the meter.
The international yard and pound agreement of July 1959 defined the length of the international yard in the United States and countries of the Commonwealth of Nations as exactly 0.9144 meters. Consequently, the international foot is defined to be equal to exactly 0.3048 meters. This was 2 ppm shorter than the previous U.S. definition and 1.7 ppm longer than the previous British definition.
The international standard symbol for a foot is "ft" (see ISO 31-1, Annex A). In some cases, the foot is denoted by a prime, which is often marked by an apostrophe, and the inch by a double prime; for example, 2 feet 4 inches is sometimes denoted as 2′−4″, 2′ 4″ or 2′4″. (See 'minute' for another case where prime and double prime symbols are used to denote first and second cuts in refining measurement.)
In the United States, the foot was defined as 12 inches, with the inch being defined by the Mendenhall Order of 1893 by 39.37 inches = 1 m. In Imperial units, the foot was defined as 1⁄3 yard, with the yard being realized as a physical standard (separate from the standard meter).
The yard standards of the different Commonwealth countries were periodically compared with one another. The value of the United Kingdom primary standard of the yard was determined in terms of the meter by the National Physical Laboratory in 1964 as 0.9143969 m, implying a pre-1959 foot in the UK of approximately 0.304798966667 m.
When the international foot was defined in 1959, a great deal of survey data was already available based on the former definitions, especially in the United States and in India. The small difference between the survey and the international foot would not be detectable on a survey of a small parcel, but becomes significant for mapping, or when the state plane coordinate system (SPCS) is used in the US, because the origin of the system may be hundreds of thousands of feet (hundreds of miles) from the point of interest. Hence the previous definitions continued to be used for surveying in the United States and India for many years, and are denoted survey feet to distinguish them from the international foot. The United Kingdom was unaffected by this problem, as the retriangulation of Great Britain (1936–62) had been done in meters.
US survey footEdit
The United States survey foot is defined as exactly 1200⁄3937 meters, approximately 0.304800609601 m.Out of 50 states and six other jurisdictions, 40 have legislated that surveying measures should be based on the U.S. survey foot, six have legislated that they be made on the basis of the international foot, and ten have not specified the conversion factor from metric units.
State legislation is also important for determining the conversion factor to be used for everyday land surveying and real estate transactions, although the difference (2 ppm) is of no practical significance given the precision of normal surveying measurements over short distances (usually much less than a mile).
Indian survey footEdit
The Indian survey foot is defined as exactly 0.3047996 m, presumably derived from a measurement of the previous Indian standard of the yard. The current National Topographic Database of the Survey of India is based on the metric WGS-84 datum, which is also used by the Global Positioning System.
In 1799 the meter became the official unit of length in France. This was not fully enforced, and in 1812 Napoleon introduced the system of mesures usuelles which restored the traditional French measurements in the retail trade, but redefined them in terms of metric units. The foot, or pied métrique, was defined as one third of a meter. This unit continued in use until 1837.
- In Hesse, the Fuß (foot) was redefined as 25 cm.
- In Baden, the Fuß was redefined as 30 cm.
- In the Palatinate, the Fuß was redefined as being 33 1⁄3 cm (as in France).
Other obsolete feetEdit
Prior to the introduction of the metric system, many European cities and countries used the foot, but it varied considerably in length: the voet in Ieper, Belgium, was 273.8 millimetres (10.78 in) while the piede in Venice was 347.73 millimetres (13.690 in). Lists of conversion factors between the various units of measure were given in many European reference works including:
- Traité, Paris – 1769
- Palaiseau – Bordeaux: 1816 
- de Gelder, Amsterdam and The Hague – 1824
- Horace, Brussels – 1840
- Noback & Noback (2 volumes), Leipzig – 1851
- Bruhns, Leipzig – 1881
Many of these standards were peculiar to a particular city, especially in Germany (which, before German Unification in 1871, consisted of many kingdoms, principalities, free cities and so on). In many cases the length of the unit was not uniquely fixed: for example, the English foot was stated as 11 pouces 2.6 lignes (French inches and lines) by Picard, 11 pouces 3.11 lignes by Maskelyne and 11 pouces 3 lignes by D'Alembert.
Most of the various feet in this list ceased to be used when the countries adopted the metric system. The Netherlands and modern Belgium adopted the metric system in 1817, having used the mesures usuelles under Napoleon and the newly formed German Empire adopted the metric system in 1871.
The palm (typically 200 mm to 280 mm) was used in many Mediterranean cities instead of the foot. Horace Doursther, whose reference was published[clarification needed] in Belgium which had the smallest foot measurements, grouped both units together, while J.F.G. Palaiseau devoted three chapters to units of length: one for linear measures (palms and feet), one for cloth measures (ells) and one for distances traveled (miles and leagues). In the table below, arbitrary cut-off points of 270 mm and 350 mm have been chosen.
|Location||Modern Country||Local name||Metric
|Prague||Czech Republic||stopa||296.4||(1851) Bohemian foot or shoe|
|301.7||(1759) Quoted as "11 pouces 1 3⁄4 lignes"[Notes 1]|
|Denmark||Denmark||Fod||313.85||Until 1835, thereafter the Prussian foot|
|330.5||(1759) Quoted as "2 1⁄2 lignes larger than the pied [of Paris]"[Notes 1]|
|France||France||pied du roi||324.84||[Notes 2]|
|Bordeaux (urban)||France||pied de ville de Bordeaux||343.606|
|Bordeaux (rural)||France||pied de terre de Bordeaux||357.214|
|Strasbourg||France||pied de Strasbourg||294.95|
|Darmstadt||Germany||Fuß||287.6||Until 1818, thereafter the Hessen "metric foot"|
|Prussia||Germany, Poland, Russia etc.||Rheinfuß||313.85|
|Frankfurt am Main||Germany||Fuß||284.61|
|Venice & Lombardy||Italy||347.73|
|Amsterdam||Netherlands||voet||283.133||Divided into 11 duimen (inches)|
|Honsbossche en Rijpse||Netherlands||voet||285.0|
|Norway||Norway||fot||313.75||(1824–1835)[Notes 3] Thereafter as for Sweden|
|288.0||(From 1819) Polish stopa|
|Lisbon||Portugal||Pé||330.0||(From 1835)[Notes 4]|
|South Africa||South Africa||Cape foot||314.858||Originally equal to the Rijnland foot; redefined as 1.033 English feet in 1859.|
|Burgos and Castile||Spain||Pie de Burgos/
|278.6||(1759) Quoted as "122.43 lignes"[Notes 1]|
|Toledo||Spain||Pie||279.0||(1759) Quoted as "10 pouces 3.7 lignes"[Notes 1]|
|Sweden||Sweden||fot||296.9||= 12 tum (inches). The Swedish fot was also used in Finland ("jalka").|
|Galicia||Ukraine, Poland||stopa galicyjska||296.96||Part of Austria before World War I|
|Scotland||United Kingdom||fuit, fit, troigh||305.287||[Notes 5]|
(In Belgium, the words pied (French) and voet (Dutch) would have been used interchangeably.)
- The source document used pre-metric French units (pied, pouce and lignes)
- The original meter was computed using pre-metric French Units
- The Norwegian fot was defined in 1824 as the length of a (theoretical) pendulum that would have a period of 12⁄38 seconds at 45° from the equator
- Prior to 1835, the pé or foot was not used in Portugal – instead a palm was used. In 1835 the size of the palm was increased from 217.37 mm (according to Palaiseau) to 220 mm
- The Scots foot ceased to be legal after the Act of Union in 1707
- The original reference was given in a round number of centimeters
- "Appendix G – Weights and Measures". The World Factbook. Washington: Central Intelligence Agency. January 17, 2007. Archived from the original on February 23, 2011. Retrieved February 4, 2007.
- Kelly, Jon (December 21, 2011). "Will British people ever think in metric?". BBC. Archived from the original on April 24, 2012.
- Alder, Ken (2002). The Measure of all Things—The Seven-Year-Odyssey that Transformed the World. London: Abacus.
- Weights and Measures Act Archived December 28, 2014, at the Wayback Machine, accessed January 2012, Act current to 2012-01-18. Basis for units of measurement 4.(1) All units of measurement used in Canada shall be determined on the basis of the International System of Units established by the General Conference of Weights and Measures. (...) Canadian units (5) The Canadian units of measurement are as set out and defined in Schedule II, and the symbols and abbreviations therefore are as added pursuant to subparagraph 6(1)(b)(ii).
- Weights and Measures Act Archived October 16, 2012, at the Wayback Machine
- Oswald Ashton Wentworth Dilke (May 22, 1987). Mathematics and measurement. University of California Press. p. 23. ISBN 978-0-520-06072-2. Retrieved February 2, 2012.
- Fessler, Daniel M; Haley, Kevin J; Lal, Roshni D (January–February 2005). "Sexual dimorphism in foot length proportionate to stature" (PDF). Annals of Human Biology. 32 (1): 44–59. doi:10.1080/03014460400027581. Archived (PDF) from the original on June 8, 2011.
- Kenoyer JM (2010) "Measuring the Harappan world," in Morley I & Renfrew C (edd) The Archaeology of Measurement, 117; "Archived copy" (PDF). Archived from the original (PDF) on June 26, 2015. Retrieved January 11, 2015.CS1 maint: archived copy as title (link)
- Herodotus; Rawlinson, George (May 14, 1861). "History of Herodotus : a new English version". New York D. Appleton – via Internet Archive.
- "Epidauros, Stadium (Building)". www.perseus.tufts.edu. Archived from the original on May 10, 2017.
- Oswald Ashton Wentworth Dilke (May 22, 1987). Mathematics and measurement. University of California Press. p. 26. ISBN 978-0-520-06072-2. Retrieved February 2, 2012.
- Russ Rowlett. "How Many? A Dictionary of Units of Measurement". Center for Mathematics and Science Education, University of North Carolina at Chapel Hill. Archived from the original on February 2, 2013. Retrieved February 28, 2011.
- Sutherland, Elizabeth R (May 1957). "Feet and dates at Charlieu". Journal of the Society of Architectural Historians. 16 (2). JSTOR 987740.
- Jacob Koebel (1535). Geometrei. Von künstlichem Feldmessen und absehen (in German). Archived from the original on November 16, 2011.
- "Geometrey". digital.slub-dresden.de (in German). Saxon State Library. Retrieved February 22, 2019.
- Teather, Anne; et al. (February 8, 2019). "Getting the Measure of Stonehenge". British Archaeology (165): 48–51.
- Great Britain (1762). The statutes at large: from the Magna Charta, to the end of the eleventh Parliament of Great Britain, anno 1761 (continued to 1807). The statutes at large. 1. Printed by J. Bentham. p. 400. Retrieved November 30, 2011.
- Zupko, Ronald Edward (1977). British Weights and Measures: A History from Antiquity to the Seventeenth Century. University of Wisconsin Press. pp. 6, 10, 20. ISBN 978-0-299-07340-4.
- "On what basis is one inch exactly equal to 25.4 mm? Has the imperial inch been adjusted to give this exact fit and if so when?". National Physical Laboratory. Archived from the original on August 7, 2012. Retrieved July 24, 2012.
- See, for example, Report on the Comparisons of the Parliamentary Copies of the Imperial Standards with the Imperial Standard Yard and the Imperial Standard Pound and with each other during the Years 1947 to 1948 (H.M.S.O., London, 1950). Report on the Comparisons of the Parliamentary Copies of the Imperial Standards with each other during the Year 1957 (H.M.S.O., London, 1958).
- Bigg, P. H.; Anderton, Pamela (March 1964), "The United Kingdom standards of the yard in terms of the meter", British Journal of Applied Physics, 15 (3): 291–300, Bibcode:1964BJAP...15..291B, doi:10.1088/0508-3443/15/3/308CS1 maint: uses authors parameter (link)
- A. V. Astin & H. Arnold Karo, (1959), Refinement of values for the yard and the pound Archived August 21, 2006, at the Wayback Machine, Washington DC: National Bureau of Standards, republished on National Geodetic Survey web site and the Federal Register (Doc. 59-5442, Filed, June 30, 1959, 8:45 am)
- "State Plane Coordinate System", National Geodetic Survey, May 4, 2019.
- "Measuring Unit Change Coming in 2022", National Geodetic Survey, June 14, 2019.
- Schedule to the Standards of Weights and Measures Act, 1976.
- Survey of India, "National Map Policy – 2005" Archived March 31, 2010, at the Wayback Machine.
- Dr. Franz Mozhnik: Lehrbuch des gesammten Rechnens für die vierte Classe der Hauptschulen in den k.k. Staaten. Im Verlage der k.k. Schulbücher Verschleiß-Administration bey St. Anna in der Johannisgasse – Wien 1848
- Denis Février. "Un historique du mètre" (in French). Ministère de l'Économie, des Finances et de l'Industrie. Archived from the original on February 28, 2011. Retrieved March 10, 2011.
- "Amtliche Maßeinheiten in Europa 1842" [Official measures in Europe 1842] (in German). Archived from the original on July 23, 2013. Retrieved September 22, 2012.
- d'Anville, Jean Baptiste Bourguignon (1769). Traité des mesures itinéraires anciennes et modernes [Treatise of ancient and modern measures of distance] (in French). Paris: de l'Imprimerie Royale. Retrieved October 24, 2011.
- Palaiseau, JFG (October 1816). Métrologie universelle, ancienne et moderne: ou rapport des poids et mesures des empires, royaumes, duchés et principautés des quatre parties du monde. Bordeaux. Retrieved October 30, 2011.
- Jacob de Gelder (1824). Allereerste Gronden der Cijferkunst [Introduction to Numeracy] (in Dutch). 's-Gravenhage (The Hague) and Amsterdam: de Gebroeders van Cleef. pp. 163–176. Retrieved March 2, 2011.
- Doursther, Horace (1840). Dictionnaire universel des poids et mesures anciens et modernes. Brussels: M. Hayez. pp. 402–418. Retrieved October 25, 2011.
- Noback, Christian; Noback, Friedrich Eduard (1851). Vollständiges tasehenbuch der Münz-, Maass- und Gewichts-Verhältnisse etc. aller Länder und Handelsplätze [Comprehensive pocketbook of money, weights and measures for all counties and trading centres] (in German). I. Leipzig: F. А. Brockhaus. Retrieved October 24, 2011.
- Noback, Christian; Noback, Friedrich Eduard (1851). Vollständiges tasehenbuch der Münz-, Maass- und Gewichts-Verhältnisse etc. aller Länder und Handelsplätze [Comprehensive pocketbook of money, weights and measures for all counties and trading centres] (in German). II. Leipzig: F. А. Brockhaus. Retrieved October 24, 2011.
- Bruhns, Carl (1881). new manual of logarithms to seven places of decimals. Leipzig: Bernhard Tauchnitz. p. 610. Retrieved October 26, 2011.
- Thomas Jefferson (July 13, 1790). "Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States". United States House of Representatives. Archived from the original on June 6, 2011. Retrieved November 8, 2011.
- Jacob de Gelder (1824). Allereerste Gronden der Cijferkunst [Introduction to Numeracy] (in Dutch). The Hague and Amsterdam: de Gebroeders van Cleef. pp. 155–157. Retrieved March 2, 2011.
- Andreas Dreizler; et al. (April 20, 2009). "Metrologie" (PDF) (in German). Technische Universität Darmstadt. Retrieved March 28, 2011.[dead link]
- "Maten en gewichten" [Weights and measures] (in Dutch). Vlaamse Vereniging voor Familiekunde (Flemish Association for Family History). 2011. Archived from the original on April 25, 2012. Retrieved October 24, 2011.
- Rose, Joshua (1900). Pattern Makers Assistant (9th ed.). New York: D. van Nostrand Co. p. 264.
- "Les anciennes unités et leurs équivalences" [Old units and their equivalences] (in French). Le Cybergroupe Généalogique de Charente Poitevine. 2011. Archived from the original on July 20, 2011. Retrieved February 25, 2011.
- Guilhiermoz, P (1913). "De l'équivalence des anciennes mesures. A propos d'une publication récente" [Values of ancient measures quoted in recent publications]. Bibliothèque de l'École des chartes (in French). 74: 267–328. doi:10.3406/bec.1913.448498.
- halbo, leif (July 21, 2005). "Mål, vekt og norsk selvstendighet" [Dimensions, weight and Norwegian independence]. Aftenposten.
-  – Information copied from pl:Stopa polska
- Tomasz Zakiewicz (April 2005). "The Cape Geodetic Standards and Their Impact on Africa" (PDF). FIG, Cairo. Archived (PDF) from the original on January 20, 2012. Retrieved January 4, 2012.
- "Scottish Weights and Measures: Distance and Area". Scottish Archive Network. Archived from the original on August 14, 2009. Retrieved January 28, 2010.