DescriptionGeometric dimenioning and tolerancing-hole.svg	English: An example of geometric dimensioning and tolerancing (GD&T) of a hole. Explanation: the cross signifies a position tolerance; the tolerance is 0.02 mm ; the position is in reference to the datum planes A and B.
Date	10 January 2011, 01:43 (UTC)
Source	Cotation gps position percage cotation traditionnelle.svg
Author	Cotation gps position percage cotation traditionnelle.svg: Cdang Wizard191
SVG development InfoField	The SVG code is valid.   This diagram was created with Inkscape, or with something else.    This diagram uses embedded text that can be easily translated using a text editor.

I, the copyright holder of this work, hereby publish it under the following licenses:

This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.

You are free:

• to share – to copy, distribute and transmit the work
• to remix – to adapt the work

Under the following conditions:

• attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

https://creativecommons.org/licenses/by-sa/3.0CC BY-SA 3.0 Creative Commons Attribution-Share Alike 3.0 truetrue

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue

You may select the license of your choice.

Original upload log

This image is a of the following images:

• File:Cotation_gps_position_percage_cotation_traditionnelle.svg licensed with Cc-by-sa-3.0, GFDL
  • 2008-07-02T09:36:01Z Cdang 1411x1184 (33251 Bytes) additional reference (necessary to completely define the axes)
  • 2008-07-01T11:56:14Z Cdang 1004x1186 (28619 Bytes) bigger picture (pb with rendering of text: shifted)
  • 2008-06-30T16:00:02Z Cdang 100x119 (19127 Bytes) {{Information |Description={{fr|1=Tolérancement géométrique (cotation GPS), exemple de la position d'un perçage : comparaison entre la cotation « traditionnelle » et la cotation GPS. Concernant la cotation GPS : * la cr

Uploaded with derivativeFX