Open main menu

Ferrari Colombo engine

The Ferrari Colombo Engine was a petrol fueled, water cooled, carburetted 60° V12 engine designed by Gioacchino Colombo and produced in numerous iterations by Italian automaker Ferrari between 1947 and 1988. The design team also included Giuseppe Busso and Luigi Bazzi.[1]

1961 Ferrari 250 TR 61 Spyder Fantuzzi engine.jpg
Colombo engine in a 1961 250TR Spider
Overview
ManufacturerFerrari
Production1947–1988
Layout
Configuration60° V12
Block materialAluminium
Head materialAluminium
ValvetrainSOHC, 24-valve
DOHC, 24-valve
Compression ratio7.5:1 - 9.8:1
Combustion
SuperchargerRoots-type
(in some versions)
Fuel systemWeber carburetor
Bosch K-Jetronic FI
Fuel typePetrol
Oil systemWet sump
Dry sump
Cooling systemWater cooled
Chronology
SuccessorFerrari flat-12 engine

Colombo had formerly designed Alfa Romeos for Enzo Ferrari. These V12 powerplants ranged from the diminutive 1,497 cc (1.5 L; 91.4 cu in) unit fitted to the 125S to the 4,943 cc (4.9 L; 301.6 cu in) unit in the 1986 412i. Colombo designed bore centres at 90 mm apart. Significant updates were made in 1963 for the 330 series featuring a redesigned block with wider, 94 mm, bore spacing.[2][3]

Enzo Ferrari had long admired the V12 engines of Packard, Auto Union, and Alfa Romeo[4] (where he was long employed), but his first car, the 1940 Auto Avio Costruzioni 815, used a Fiat straight-8. Ferrari's first homegrown engine was a V12 designed by Colombo, with development continuing long after original designer Colombo had been replaced by Aurelio Lampredi as the company's marquee engine designer. Although Lampredi's engines were a real force for the company, it was Colombo's V12 which would be the primary motivator for the company's consumer products through the 1950s and 1960s.

125Edit

 
Enzo Ferrari and his engine department in the late 1940s

The first homegrown Ferrari engine was the 125. First appearing May 11, 1947 under the hood of Ferrari's 125 S sports racer, the engine allowed the company to claim six victories in 14 races that year. The 125 S sported tiny 55 mm (2.17 in) by 52.5 mm (2.07 in) cylinders, the resulting 124.73 cc (7.6 cu in) of each cylinder rounded up to give the engine, and the car, its name. Overall, the engine displaced exactly 1,496.77 cc (1.5 L; 91.3 cu in). It had a single overhead camshaft on each cylinder bank with a 60° angle between the two banks. The engine had two valves per cylinder fed through three 30DCF Weber carburetors. A 7.5:1 compression ratio yielded 118 PS (116 hp; 87 kW) at 6800 rpm.

Colombo and Ferrari had designed the engine with Formula One regulations in mind, and introduced it the next year in the company's first F1 car, the 125 F1. This time, it was supercharged, in accordance with F1 dictates, for a total output of 230 PS (227 hp; 169 kW) at 7,000 rpm. However, the single-stage Roots-type supercharger was incapable of producing the high-end power required to compete with the strong eight-cylinder Alfa Romeo 158 and four-cylinder Maserati 4CLT. Nevertheless, strong driving and a nimble chassis allowed the company to place third in its first outing, at the Valentino Grand Prix on September 5, 1948 and the company persevered in racing.

For 1949, the engine was further modified with dual overhead camshafts (though still two valves per cylinder) and a two-stage supercharger.[5] This combination gave the car better top-end performance and the resulting 280 PS (276 hp; 206 kW) gave it five Grand Prix wins. Development continued the following year, but the problematic superchargers were dropped in favor of larger displacement and Lampredi's 275 engine superseded the original Ferrari engine.

Applications:

58.8 mm strokeEdit

 
Ferrari 212 2.6 L engine
 
Colombo Testa Rossa engine in a 1958 250TR
 
Colombo engine in a 1962 250 GTO

The early 166, 195, and 212 cars used Colombo V12s of varying sizes. All shared the same 58.8 mm (2.31 in) stroke, with 60, 65, and 68 mm (2.68 in) bores giving displacements of 1,995 cc (2.0 L; 121.7 cu in) in the 166, 2,341 cc (2.3 L; 142.9 cu in) in the 195 and 2,563 cc (2.6 L; 156.4 cu in) in the 212, respectively. Output ranged from 105 PS (104 hp; 77 kW) to 165 PS (163 hp; 121 kW).

250Edit

One of the most common Colombo engines is the 250. It bowed in 1952 in the 250S and lasted through the 1963 330 America. It used a 73 mm (2.87 in) bore with the common Colombo stroke of 58.8 mm (2.31 in) for a total of 2,953 cc (3.0 L).

275Edit

The final 58.8 mm (2.31 in) Colombo Ferrari was the 275. It used a 3,286 cc (3.3 L; 200.5 cu in) variant of the V12 with a wide 77 mm (3.03 in) bore for up to 300 PS (296 hp; 221 kW).

330Edit

The 1960 400 Superamerica replaced the previous model's Lampredi engine with a 3,967 cc (4.0 L; 242.1 cu in) Colombo. It diverged from the standard 58.8 mm (2.31 in) stroke with a 71 mm (2.80 in) stroke and 77 mm (3.03 in) bore. Output was 340 to 400 PS (335 to 395 hp; 250 to 294 kW) with triple Weber carburetors.

Although the 1963 330 series also used a 3,967 cc (4.0 L; 242.1 cu in) engine with the same bore and stroke as the 400 Superamerica, this engine was quite different. It used a wider bore spacing, paving the way for future displacement increases. The spark plugs were moved and a new water pump was used. The dynamo on the prior versions was replaced by a true alternator. In the end, 300 PS (221 kW; 296 hp) was on tap.

Four-camEdit

The Colombo V12 was substantially reworked for 1967's 275 GTB/4. It still used two valves per cylinder, but dual overhead cams were now used as well. In a departure from previous Ferrari designs, the valve angle was reduced three degrees to 54° for a more-compact head. The dual camshafts also allowed the valves to be aligned "correctly" (perpendicular to the camshaft) instead of offset as in SOHC Ferraris. It was a dry-sump design with a huge 16 L (17 US qt) capacity. The engine retained the bore and stroke dimensions of the 275 model for 3,286 cc (3 L; 201 cu in) of displacement. Output was 330 PS (325 hp; 243 kW) at 8000 rpm and 240 lb⋅ft (325 N⋅m) of torque at 6000 rpm with six 40 DCN 9 Weber carburetors.

365Edit

The 330 Colombo engine was enlarged with an 81 mm (3.19 in) bore to 4,390 cc (4.4 L; 267.9 cu in) for 1966's 365 California, retaining single overhead cams and wet sump lubrication. A reworked engine with four camshafts was used in the GT/4 models. The 365 GTB/4 Daytona was the only 365 engined car featuring dry sump lubrication.

Applications:

400, 412Edit

The wet sump, four-cam, 365 Colombo engine was enlarged again to 4,823 cc (4.8 L; 294.3 cu in) for 1976's 400 with the same 81 mm (3.19 in) bore and a 78 mm (3.07 in) stroke. The carburetors were replaced with Bosch K-Jetronic fuel injection in 1979. In 1986 the engine was bored to 82 mm (3.23 in) giving a displacement of 4,943 cc (4.9 L; 301.6 cu in).

Applications:

See alsoEdit

ReferencesEdit

  1. ^ "Ferrari 125 S". ferrari.com. Retrieved 11 July 2019.
  2. ^ "Ferrari 330 GT 2+2". Ferrari. Retrieved 16 June 2015.
  3. ^ Shea, Terry (September 2014). "1964 Ferrari 330 GT". Hemmings Motor News. American City Business Journals. Retrieved 16 June 2015.
  4. ^ Acerbi, Leonardo (2006). Ferrari: A Complete Guide to All Models. Motorbooks. p. 5. ISBN 9780760325506.
  5. ^ "The Story of the V12: The Engine That Made Ferrari". JBR Capital. Retrieved 2018-04-23.