In chemistry, an ester is a functional group derived from an acid (organic or inorganic) in which the hydrogen atom (H) of at least one acidic hydroxyl group (−OH) of that acid is replaced by an organyl group (R). Analogues derived from oxygen replaced by other chalcogens belong to the ester category as well.[1] According to some authors, organyl derivatives of acidic hydrogen of other acids are esters as well (e.g. amides), but not according to the IUPAC.[1]

An ester of a carboxylic acid. R stands for any group (typically hydrogen or organyl) and R stands for any organyl group.

Glycerides are fatty acid esters of glycerol; they are important in biology, being one of the main classes of lipids and comprising the bulk of animal fats and vegetable oils. Lactones are cyclic carboxylic esters; naturally occurring lactones are mainly 5- and 6-membered ring lactones. Lactones contribute to the aroma of fruits, butter, cheese, vegetables like celery and other foods.

Esters can be formed from oxoacids (e.g. esters of acetic acid, carbonic acid, sulfuric acid, phosphoric acid, nitric acid, xanthic acid), but also from acids that do not contain oxygen (e.g. esters of thiocyanic acid and trithiocarbonic acid). An example of an ester formation is the substitution reaction between a carboxylic acid (R−C(=O)−OH) and an alcohol (R'−OH), forming an ester (R−C(=O)−O−R'), where R stands for any group (typically hydrogen or organyl) and R stands for organyl group.

Organyl esters of carboxylic acids typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. They perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers,[2] and are one of the largest classes of synthetic lubricants on the commercial market.[3] Polyesters are important plastics, with monomers linked by ester moieties. Esters of phosphoric acid form the backbone of DNA molecules. Esters of nitric acid, such as nitroglycerin, are known for their explosive properties.

There are compounds in which an acidic hydrogen of acids mentioned in this article are not replaced by an organyl, but by some other group. According to some authors, those compounds are esters as well, especially when the first carbon atom of the organyl group replacing acidic hydrogen, is replaced by another atom from the group 14 elements (Si, Ge, Sn, Pb); for example, according to them, trimethylstannyl acetate (or trimethyltin acetate) CH3COOSn(CH3)3 is a trimethylstannyl ester of acetic acid, and dibutyltin dilaurate (CH3(CH2)10COO)2Sn((CH2)3CH3)2 is a dibutylstannylene ester of lauric acid, and the Phillips catalyst CrO2(OSi(OCH3)3)2 is a trimethoxysilyl ester of chromic acid (H2CrO4).[4][5]

Nomenclature

edit

Etymology

edit

The word ester was coined in 1848 by a German chemist Leopold Gmelin,[6] probably as a contraction of the German Essigäther, "acetic ether".

IUPAC nomenclature

edit

The names of esters that are formed from an alcohol and an acid, are derived from the parent alcohol and the parent acid, where the latter may be organic or inorganic. Esters derived from the simplest carboxylic acids are commonly named according to the more traditional, so-called "trivial names" e.g. as formate, acetate, propionate, and butyrate, as opposed to the IUPAC nomenclature methanoate, ethanoate, propanoate, and butanoate. Esters derived from more complex carboxylic acids are, on the other hand, more frequently named using the systematic IUPAC name, based on the name for the acid followed by the suffix -oate. For example, the ester hexyl octanoate, also known under the trivial name hexyl caprylate, has the formula CH3(CH2)6CO2(CH2)5CH3.

 
Butyl acetate, an ester derived from a residue of butanol (CH3CH2CH2CH2OH) (the butanol residue is butyl group −CH2CH2CH2CH3) (right side of the picture, blue) and acetic acid CH3CO2H (left side of the picture, orange). The acidic hydrogen atom (−H) from acetic acid molecule is replaced by the butyl group.

The chemical formulas of organic esters formed from carboxylic acids and alcohols usually take the form RCO2R' or RCOOR', where R and R' are the organyl parts of the carboxylic acid and the alcohol, respectively, and R can be a hydrogen in the case of esters of formic acid. For example, butyl acetate (systematically butyl ethanoate), derived from butanol and acetic acid (systematically ethanoic acid) would be written CH3CO2(CH2)3CH3. Alternative presentations are common including BuOAc and CH3COO(CH2)3CH3.

Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.

Orthoesters

edit

An uncommon class of esters are the orthoesters. One of them are the esters of orthocarboxylic acids. Those esters have the formula RC(OR′)3, where R stands for any group (organic or inorganic) and R stands for organyl group. For example, triethyl orthoformate (HC(OCH2CH3)3) is derived, in terms of its name (but not its synthesis) from esterification of orthoformic acid (HC(OH)3) with ethanol.

Esters of inorganic acids

edit
 
A phosphoric acid ester, where R stands for an organyl group.

Esters can also be derived from inorganic acids.

Inorganic acids that exist as tautomers form two or more types of esters.

Some inorganic acids that are unstable or elusive form stable esters.

In principle, a part of metal and metalloid alkoxides, of which many hundreds are known, could be classified as esters of the corresponding acids (e.g. aluminium triethoxide (Al(OCH2CH3)3) could be classified as an ester of aluminic acid which is aluminium hydroxide, tetraethyl orthosilicate (Si(OCH2CH3)4) could be classified as an ester of orthosilicic acid, and titanium ethoxide (Ti(OCH2CH3)4) could be classified as an ester of orthotitanic acid).

Structure and bonding

edit

Esters derived from carboxylic acids and alcohols contain a carbonyl group C=O, which is a divalent group at C atom, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, carboxylic acid esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides.[7] The pKa of the alpha-hydrogens on esters of carboxylic acids is around 25 (alpha-hydrogen is a hydrogen bound to the carbon adjacent to the carbonyl group (C=O) of carboxylate esters).[8]

Many carboxylic acid esters have the potential for conformational isomerism, but they tend to adopt an S-cis (or Z) conformation rather than the S-trans (or E) alternative, due to a combination of hyperconjugation and dipole minimization effects. The preference for the Z conformation is influenced by the nature of the substituents and solvent, if present.[9][10] Lactones with small rings are restricted to the s-trans (i.e. E) conformation due to their cyclic structure.

 
 
Metrical details for methyl benzoate, distances in picometers.[11]

Physical properties and characterization

edit

Esters derived from carboxylic acids and alcohols are more polar than ethers but less polar than alcohols. They participate in hydrogen bonds as hydrogen-bond acceptors, but cannot act as hydrogen-bond donors, unlike their parent alcohols. This ability to participate in hydrogen bonding confers some water-solubility. Because of their lack of hydrogen-bond-donating ability, esters do not self-associate. Consequently, esters are more volatile than carboxylic acids of similar molecular weight.[7]

Characterization and analysis

edit

Esters are generally identified by gas chromatography, taking advantage of their volatility. IR spectra for esters feature an intense sharp band in the range 1730–1750 cm−1 assigned to νC=O. This peak changes depending on the functional groups attached to the carbonyl. For example, a benzene ring or double bond in conjunction with the carbonyl will bring the wavenumber down about 30 cm−1.

Applications and occurrence

edit

Esters are widespread in nature and are widely used in industry. In nature, fats are, in general, triesters derived from glycerol and fatty acids.[12] Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries.[13] Several billion kilograms of polyesters are produced industrially annually, important products being polyethylene terephthalate, acrylate esters, and cellulose acetate.[14]

 
Representative triglyceride found in a linseed oil, a triester of glycerol (center, black) derived of linoleic acid (bottom right, green), alpha-linolenic acid (left, red), and oleic acid (top right, blue).

Preparation

edit

Esterification is the general name for a chemical reaction in which two reactants (typically an alcohol and an acid) form an ester as the reaction product. Esters are common in organic chemistry and biological materials, and often have a pleasant characteristic, fruity odor. This leads to their extensive use in the fragrance and flavor industry. Ester bonds are also found in many polymers.

Esterification of carboxylic acids with alcohols

edit

The classic synthesis is the Fischer esterification, which involves treating a carboxylic acid with an alcohol in the presence of a dehydrating agent:

RCO2H + R'OH ⇌ RCO2R' + H2O

The equilibrium constant for such reactions is about 5 for typical esters, e.g., ethyl acetate.[15] The reaction is slow in the absence of a catalyst. Sulfuric acid is a typical catalyst for this reaction. Many other acids are also used such as polymeric sulfonic acids. Since esterification is highly reversible, the yield of the ester can be improved using Le Chatelier's principle:

  • Using the alcohol in large excess (i.e., as a solvent).
  • Using a dehydrating agent: sulfuric acid not only catalyzes the reaction but sequesters water (a reaction product). Other drying agents such as molecular sieves are also effective.
  • Removal of water by physical means such as distillation as a low-boiling azeotrope with toluene, in conjunction with a Dean-Stark apparatus.

Reagents are known that drive the dehydration of mixtures of alcohols and carboxylic acids. One example is the Steglich esterification, which is a method of forming esters under mild conditions. The method is popular in peptide synthesis, where the substrates are sensitive to harsh conditions like high heat. DCC (dicyclohexylcarbodiimide) is used to activate the carboxylic acid to further reaction. 4-Dimethylaminopyridine (DMAP) is used as an acyl-transfer catalyst.[16]

 

Another method for the dehydration of mixtures of alcohols and carboxylic acids is the Mitsunobu reaction:

RCO2H + R'OH + P(C6H5)3 + R2N2 → RCO2R' + OP(C6H5)3 + R2N2H2

Carboxylic acids can be esterified using diazomethane:

RCO2H + CH2N2 → RCO2CH3 + N2

Using this diazomethane, mixtures of carboxylic acids can be converted to their methyl esters in near quantitative yields, e.g., for analysis by gas chromatography. The method is useful in specialized organic synthetic operations but is considered too hazardous and expensive for large-scale applications.

Esterification of carboxylic acids with epoxides

edit

Carboxylic acids are esterified by treatment with epoxides, giving β-hydroxyesters:

RCO2H + RCHCH2O → RCO2CH2CH(OH)R

This reaction is employed in the production of vinyl ester resin from acrylic acid.

Alcoholysis of acyl chlorides and acid anhydrides

edit

Alcohols react with acyl chlorides and acid anhydrides to give esters:

RCOCl + R'OH → RCO2R' + HCl
(RCO)2O + R'OH → RCO2R' + RCO2H

The reactions are irreversible simplifying work-up. Since acyl chlorides and acid anhydrides also react with water, anhydrous conditions are preferred. The analogous acylations of amines to give amides are less sensitive because amines are stronger nucleophiles and react more rapidly than does water. This method is employed only for laboratory-scale procedures, as it is expensive.

Alkylation of carboxylic acids and their salts

edit

Trimethyloxonium tetrafluoroborate can be used for esterification of carboxylic acids under conditions where acid-catalyzed reactions are infeasible:[17]

RCO2H + (CH3)3OBF4 → RCO2CH3 + (CH3)2O + HBF4

Although rarely employed for esterifications, carboxylate salts (often generated in situ) react with electrophilic alkylating agents, such as alkyl halides, to give esters.[14][18] Anion availability can inhibit this reaction, which correspondingly benefits from phase transfer catalysts or such highly polar aprotic solvents as DMF. An additional iodide salt may, via the Finkelstein reaction, catalyze the reaction of a recalcitrant alkyl halide. Alternatively, salts of a coordinating metal, such as silver, may improve the reaction rate by easing halide elimination.

Transesterification

edit

Transesterification, which involves changing one ester into another one, is widely practiced:

RCO2R' + CH3OH → RCO2CH3 + R'OH

Like the hydrolysation, transesterification is catalysed by acids and bases. The reaction is widely used for degrading triglycerides, e.g. in the production of fatty acid esters and alcohols. Poly(ethylene terephthalate) is produced by the transesterification of dimethyl terephthalate and ethylene glycol:[14]

n (C6H4)(CO2CH3)2 + 2n C2H4(OH)2 → [(C6H4)(CO2)2(C2H4)]n + 2n CH3OH

A subset of transesterification is the alcoholysis of diketene. This reaction affords 2-ketoesters.[14]

(CH2CO)2 + ROH → CH3C(O)CH2CO2R

Carbonylation

edit

Alkenes undergo carboalkoxylation in the presence of metal carbonyl catalysts. Esters of propanoic acid are produced commercially by this method:

H2C=CH2 + ROH + CO → CH3CH2CO2R

A preparation of methyl propionate is one illustrative example.

H2C=CH2 + CO + CH3OH → CH3CH2CO2CH3

The carbonylation of methanol yields methyl formate, which is the main commercial source of formic acid. The reaction is catalyzed by sodium methoxide:

CH3OH + CO → HCO2CH3

Addition of carboxylic acids to alkenes and alkynes

edit

In hydroesterification, alkenes and alkynes insert into the O−H bond of carboxylic acids. Vinyl acetate is produced industrially by the addition of acetic acid to acetylene in the presence of zinc acetate catalysts:[19]

HC≡CH + CH3CO2H → CH3CO2CH=CH2

Vinyl acetate can also be produced by palladium-catalyzed reaction of ethylene, acetic acid, and oxygen:

2 H2C=CH2 + 2 CH3CO2H + O2 → 2 CH3CO2CH=CH2 + 2 H2O

Silicotungstic acid is used to manufacture ethyl acetate by the alkylation of acetic acid by ethylene:

H2C=CH2 + CH3CO2H → CH3CO2CH2CH3

From aldehydes

edit

The Tishchenko reaction involves disproportionation of an aldehyde in the presence of an anhydrous base to give an ester. Catalysts are aluminium alkoxides or sodium alkoxides. Benzaldehyde reacts with sodium benzyloxide (generated from sodium and benzyl alcohol) to generate benzyl benzoate.[20] The method is used in the production of ethyl acetate from acetaldehyde.[14]

Other methods

edit

Reactions

edit

Esters are less reactive than acid halides and anhydrides. As with more reactive acyl derivatives, they can react with ammonia and primary and secondary amines to give amides, although this type of reaction is not often used, since acid halides give better yields.

Transesterification

edit

Esters can be converted to other esters in a process known as transesterification. Transesterification can be either acid- or base-catalyzed, and involves the reaction of an ester with an alcohol. Unfortunately, because the leaving group is also an alcohol, the forward and reverse reactions will often occur at similar rates. Using a large excess of the reactant alcohol or removing the leaving group alcohol (e.g. via distillation) will drive the forward reaction towards completion, in accordance with Le Chatelier's principle.[24]

Hydrolysis and saponification

edit

Acid-catalyzed hydrolysis of esters is also an equilibrium process – essentially the reverse of the Fischer esterification reaction. Because an alcohol (which acts as the leaving group) and water (which acts as the nucleophile) have similar pKa values, the forward and reverse reactions compete with each other. As in transesterification, using a large excess of reactant (water) or removing one of the products (the alcohol) can promote the forward reaction.

 
The acid-catalyzed hydrolysis of an ester and Fischer esterification correspond to two directions of an equilibrium process.

Basic hydrolysis of esters, known as saponification, is not an equilibrium process; a full equivalent of base is consumed in the reaction, which produces one equivalent of alcohol and one equivalent of a carboxylate salt. The saponification of esters of fatty acids is an industrially important process, used in the production of soap.[24]

Esterification is a reversible reaction. Esters undergo hydrolysis under acidic and basic conditions. Under acidic conditions, the reaction is the reverse reaction of the Fischer esterification. Under basic conditions, hydroxide acts as a nucleophile, while an alkoxide is the leaving group. This reaction, saponification, is the basis of soap making.

 

The alkoxide group may also be displaced by stronger nucleophiles such as ammonia or primary or secondary amines to give amides (ammonolysis reaction):

RCO2R' + NH2R″ → RCONHR″ + R'OH

This reaction is not usually reversible. Hydrazines and hydroxylamine can be used in place of amines. Esters can be converted to isocyanates through intermediate hydroxamic acids in the Lossen rearrangement.

Sources of carbon nucleophiles, e.g., Grignard reagents and organolithium compounds, add readily to the carbonyl.

Reduction

edit

Compared to ketones and aldehydes, esters are relatively resistant to reduction. The introduction of catalytic hydrogenation in the early part of the 20th century was a breakthrough; esters of fatty acids are hydrogenated to fatty alcohols.

RCO2R' + 2 H2 → RCH2OH + R'OH

A typical catalyst is copper chromite. Prior to the development of catalytic hydrogenation, esters were reduced on a large scale using the Bouveault–Blanc reduction. This method, which is largely obsolete, uses sodium in the presence of proton sources.

Especially for fine chemical syntheses, lithium aluminium hydride is used to reduce esters to two primary alcohols. The related reagent sodium borohydride is slow in this reaction. DIBAH reduces esters to aldehydes.[25]

Direct reduction to give the corresponding ether is difficult as the intermediate hemiacetal tends to decompose to give an alcohol and an aldehyde (which is rapidly reduced to give a second alcohol). The reaction can be achieved using triethylsilane with a variety of Lewis acids.[26][27]

edit

Esters can undergo a variety of reactions with carbon nucleophiles. They react with an excess of a Grignard reagent to give tertiary alcohols. Esters also react readily with enolates. In the Claisen condensation, an enolate of one ester (1) will attack the carbonyl group of another ester (2) to give tetrahedral intermediate 3. The intermediate collapses, forcing out an alkoxide (R'O) and producing β-keto ester 4.

 
The Claisen condensation involves the reaction of an ester enolate and an ester to form a beta-keto ester.

Crossed Claisen condensations, in which the enolate and nucleophile are different esters, are also possible. An intramolecular Claisen condensation is called a Dieckmann condensation or Dieckmann cyclization, since it can be used to form rings. Esters can also undergo condensations with ketone and aldehyde enolates to give β-dicarbonyl compounds.[28] A specific example of this is the Baker–Venkataraman rearrangement, in which an aromatic ortho-acyloxy ketone undergoes an intramolecular nucleophilic acyl substitution and subsequent rearrangement to form an aromatic β-diketone.[29] The Chan rearrangement is another example of a rearrangement resulting from an intramolecular nucleophilic acyl substitution reaction.

Other ester reactivities

edit

Esters react with nucleophiles at the carbonyl carbon. The carbonyl is weakly electrophilic but is attacked by strong nucleophiles (amines, alkoxides, hydride sources, organolithium compounds, etc.). The C–H bonds adjacent to the carbonyl are weakly acidic but undergo deprotonation with strong bases. This process is the one that usually initiates condensation reactions. The carbonyl oxygen in esters is weakly basic, less so than the carbonyl oxygen in amides due to resonance donation of an electron pair from nitrogen in amides, but forms adducts.

As for aldehydes, the hydrogen atoms on the carbon adjacent ("α to") the carboxyl group in esters are sufficiently acidic to undergo deprotonation, which in turn leads to a variety of useful reactions. Deprotonation requires relatively strong bases, such as alkoxides. Deprotonation gives a nucleophilic enolate, which can further react, e.g., the Claisen condensation and its intramolecular equivalent, the Dieckmann condensation. This conversion is exploited in the malonic ester synthesis, wherein the diester of malonic acid reacts with an electrophile (e.g., alkyl halide), and is subsequently decarboxylated. Another variation is the Fráter–Seebach alkylation.

Other reactions

edit

Protecting groups

edit

As a class, esters serve as protecting groups for carboxylic acids. Protecting a carboxylic acid is useful in peptide synthesis, to prevent self-reactions of the bifunctional amino acids. Methyl and ethyl esters are commonly available for many amino acids; the t-butyl ester tends to be more expensive. However, t-butyl esters are particularly useful because, under strongly acidic conditions, the t-butyl esters undergo elimination to give the carboxylic acid and isobutylene, simplifying work-up.

List of ester odorants

edit

Many esters have distinctive fruit-like odors, and many occur naturally in the essential oils of plants. This has also led to their common use in artificial flavorings and fragrances which aim to mimic those odors.

Ester name Structure Odor or occurrence
Allyl hexanoate   pineapple
Benzyl acetate   pear, strawberry, jasmine
Bornyl acetate   pine
Butyl acetate   apple, honey
Butyl butyrate   pineapple
Butyl propionate   pear drops, apple
Ethyl acetate   nail polish remover, model paint, model airplane glue, pears
Ethyl benzoate   sweet, wintergreen, fruity, medicinal, cherry, grape
Ethyl butyrate   banana, pineapple, strawberry
Ethyl hexanoate   pineapple, waxy-green banana
Ethyl cinnamate   cinnamon
Ethyl formate   lemon, rum, strawberry
Ethyl heptanoate   apricot, cherry, grape, raspberry
Ethyl isovalerate   apple
Ethyl lactate   butter, cream
Ethyl nonanoate   grape
Ethyl pentanoate   apple
Geranyl acetate   geranium
Geranyl butyrate   cherry
Geranyl pentanoate   apple
Isobutyl acetate   cherry, raspberry, strawberry
Isobutyl formate   raspberry
Isoamyl acetate   pear, banana (flavoring in Pear drops)
Isoamyl formate   plum, blackcurrant
Isopropyl acetate   fruity
Linalyl acetate   lavender, sage
Linalyl butyrate   peach
Linalyl formate   apple, peach
Methyl acetate   glue
Methyl anthranilate   grape, jasmine
Methyl benzoate   fruity, ylang ylang, feijoa
Methyl butyrate (methyl butanoate)   pineapple, apple, strawberry
Methyl cinnamate   strawberry
Methyl formate   pleasant, ethereal, rum, sweet
Methyl pentanoate (methyl valerate)   flowery
Methyl phenylacetate   honey
Methyl salicylate (oil of wintergreen)   Modern root beer, wintergreen, Germolene and Ralgex ointments (UK)
Nonyl caprylate   orange
Octyl acetate   fruity-orange
Octyl butyrate   parsnip
Amyl acetate (pentyl acetate)   apple, banana
Pentyl butyrate (amyl butyrate)   apricot, pear, pineapple
Pentyl hexanoate (amyl caproate)   apple, pineapple
Pentyl pentanoate (amyl valerate)   apple
Propyl acetate   pear
Propyl hexanoate   blackberry, pineapple, cheese, wine
Propyl isobutyrate   rum
Terpinyl butyrate   cherry

See also

edit

References

edit
  1. ^ a b IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "esters". doi:10.1351/goldbook.E02219
  2. ^ Cameron Wright (1986). A worker's guide to solvent hazards. The Group. p. 48. ISBN 9780969054542.
  3. ^ E. Richard Booser (21 December 1993). CRC Handbook of Lubrication and Tribology, Volume III: Monitoring, Materials, Synthetic Lubricants, and Applications. CRC. p. 237. ISBN 978-1-4200-5045-5.
  4. ^ "Acetoxytrimethyltin".
  5. ^ "Trimethyltin acetate | C5H12O2Sn | ChemSpider".
  6. ^ Leopold Gmelin, Handbuch der Chemie, vol. 4: Handbuch der organischen Chemie (vol. 1) (Heidelberg, Baden (Germany): Karl Winter, 1848), page 182.
    Original text:

    b. Ester oder sauerstoffsäure Aetherarten.
    Ethers du troisième genre.

    Viele mineralische und organische Sauerstoffsäuren treten mit einer Alkohol-Art unter Ausscheidung von Wasser zu neutralen flüchtigen ätherischen Verbindungen zusammen, welche man als gepaarte Verbindungen von Alkohol und Säuren-Wasser oder, nach der Radicaltheorie, als Salze betrachten kann, in welchen eine Säure mit einem Aether verbunden ist.

    Translation:

    b. Ester or oxy-acid ethers.
    Ethers of the third type.

    Many mineral and organic acids containing oxygen combine with an alcohol upon elimination of water to [form] neutral, volatile ether compounds, which one can view as coupled compounds of alcohol and acid-water, or, according to the theory of radicals, as salts in which an acid is bonded with an ether.

  7. ^ a b March, J. Advanced Organic Chemistry 4th Ed. J. Wiley and Sons, 1992: New York. ISBN 0-471-60180-2.
  8. ^ "Chemistry of Enols and Enolates – Acidity of alpha-hydrogens". 13 February 2011.
  9. ^ Diwakar M. Pawar; Abdelnaser A. Khalil; Denise R. Hooks; Kenneth Collins; Tijuana Elliott; Jefforey Stafford; Lucille Smith; Eric A. Noe (1998). "E and Z Conformations of Esters, Thiol Esters, and Amides". Journal of the American Chemical Society. 120 (9): 2108–2112. doi:10.1021/ja9723848.
  10. ^ Christophe Dugave; Luc Demange (2003). "Cis−Trans Isomerization of Organic Molecules and Biomolecules: Implications and Applications". Chemical Reviews. 103 (7): 2475–2932. doi:10.1021/cr0104375. PMID 12848578.
  11. ^ A. A. Yakovenko; J. H. Gallegos; M. Yu. Antipin; A. Masunov; T. V. Timofeeva (2011). "Crystal Morphology as an Evidence of Supramolecular Organization in Adducts of 1,2-Bis(chloromercurio)tetrafluorobenzene with Organic Esters". Crystal Growth & Design. 11 (9): 3964–3978. doi:10.1021/cg200547k.
  12. ^ Isolation of triglyceride from nutmeg: G. D. Beal "Trimyristen" Organic Syntheses, Coll. Vol. 1, p.538 (1941). Link
  13. ^ McGee, Harold. On Food and Cooking. 2003, Scribner, New York.
  14. ^ a b c d e Riemenschneider, Wilhelm; Bolt, Hermann M. "Esters, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a09_565.pub2. ISBN 978-3527306732.
  15. ^ Williams, Roger J.; Gabriel, Alton; Andrews, Roy C. (1928). "The Relation Between the Hydrolysis Equilibrium Constant of Esters and the Strengths of the Corresponding Acids". Journal of the American Chemical Society. 50 (5): 1267–1271. doi:10.1021/ja01392a005.
  16. ^ B. Neises & W. Steglich. "Esterification of Carboxylic Acids with Dicyclohexylcarbodiimide/4-Dimethylaminopyridine: tert-Butyl ethyl fumarate". Organic Syntheses; Collected Volumes, vol. 7, p. 93.
  17. ^ Raber, Douglas J.; Gariano, Jr, Patrick; Brod, Albert O.; Gariano, Anne L.; Guida, Wayne C. (1977). "Esterification of Carboxylic Acids with Trialkyloxonium Salts: Ethyl and Methyl 4-Acetoxybenzoates". Organic Syntheses. 56: 59. doi:10.15227/orgsyn.056.0059.
  18. ^ Matsumoto, Kouichi; Shimazaki, Hayato; Miyamoto, Yu; Shimada, Kazuaki; Haga, Fumi; Yamada, Yuki; Miyazawa, Hirotsugu; Nishiwaki, Keiji; Kashimura, Shigenori (2014). "Simple and Convenient Synthesis of Esters from Carboxylic Acids and Alkyl Halides Using Tetrabutylammonium Fluoride". Journal of Oleo Science. 63 (5): 539–544. doi:10.5650/jos.ess13199. ISSN 1345-8957. PMID 24770480.
  19. ^ Bienewald, Frank; Leibold, Edgar; Tužina, Pavel; Roscher, Günter (2019). "Vinyl Esters". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. pp. 1–16. doi:10.1002/14356007.a27_419.pub2. ISBN 9783527303854.
  20. ^ Kamm, O.; Kamm, W. F. (1922). "Benzyl benzoate". Organic Syntheses. 2: 5. doi:10.15227/orgsyn.002.0005; Collected Volumes, vol. 1, p. 104.
  21. ^ Ignatyev, Igor; Charlie Van Doorslaer; Pascal G.N. Mertens; Koen Binnemans; Dirk. E. de Vos (2011). "Synthesis of glucose esters from cellulose in ionic liquids". Holzforschung. 66 (4): 417–425. doi:10.1515/hf.2011.161. S2CID 101737591.
  22. ^ Neumeister, Joachim; Keul, Helmut; Pratap Saxena, Mahendra; Griesbaum, Karl (1978). "Ozone Cleavage of Olefins with Formation of Ester Fragments". Angewandte Chemie International Edition in English. 17 (12): 939–940. doi:10.1002/anie.197809392.
  23. ^ Makhova, Irina V.; Elinson, Michail N.; Nikishin, Gennady I. (1991). "Electrochemical oxidation of ketones in methanol in the presence of alkali metal bromides". Tetrahedron. 47 (4–5): 895–905. doi:10.1016/S0040-4020(01)87078-2.
  24. ^ a b Wade 2010, pp. 1005–1009.
  25. ^ W. Reusch. "Carboxyl Derivative Reactivity". Virtual Textbook of Organic Chemistry. Archived from the original on 2016-05-16.
  26. ^ Yato, Michihisa; Homma, Koichi; Ishida, Akihiko (June 2001). "Reduction of carboxylic esters to ethers with triethyl silane in the combined use of titanium tetrachloride and trimethylsilyl trifluoromethanesulfonate". Tetrahedron. 57 (25): 5353–5359. doi:10.1016/S0040-4020(01)00420-3.
  27. ^ Sakai, Norio; Moriya, Toshimitsu; Konakahara, Takeo (July 2007). "An Efficient One-Pot Synthesis of Unsymmetrical Ethers: A Directly Reductive Deoxygenation of Esters Using an InBr3/Et3SiH Catalytic System". The Journal of Organic Chemistry. 72 (15): 5920–5922. doi:10.1021/jo070814z. PMID 17602594.
  28. ^ Carey 2006, pp. 919–924.
  29. ^ Kürti and Czakó 2005, p. 30.
  30. ^ Wood, J. L.; Khatri, N. A.; Weinreb, S. M. (1979). "A direct conversion of esters to nitriles". Tetrahedron Letters. 20 (51): 4907. doi:10.1016/S0040-4039(01)86746-0.
  31. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "depsipeptides". doi:10.1351/goldbook.D01604
edit