Because the core email protocols do not have any mechanism for authentication, it is common for spam and phishing emails to use such spoofing to mislead or even prank the recipient about the origin of the message.
When an SMTP email is sent, the initial connection provides two pieces of address information:
- MAIL FROM: - generally presented to the recipient as the Return-path: header but not normally visible to the end user, and by default no checks are done that the sending system is authorized to send on behalf of that address.
- RCPT TO: - specifies which email address the email is delivered to, is not normally visible to the end user but may be present in the headers as part of the "Received:" header.
Together these are sometimes referred to as the "envelope" addressing, by analogy with a traditional paper envelope, and unless the receiving mail server signals that it has problems with either of these items, the sending system sends the "DATA" command, and typically sends several header items, including:
- From: Joe Q Doe <firstname.lastname@example.org> - the address visible to the recipient; but again, by default no checks are done that the sending system is authorized to send on behalf of that address.
- Reply-to: Jane Roe <Jane.Roe@example.mil> - similarly not checked
- Sender: Jin Jo <email@example.com> - also not checked
The result is that the email recipient sees the email as having come from the address in the From: header; they may sometimes be able to find the MAIL FROM address; and if they reply to the email it will go to either the address presented in the From: or Reply-to: header - but none of these addresses are typically reliable, so automated bounce messages may generate backscatter.
Use by spam and wormsEdit
Malware such as Klez and Sober and many more modern examples often search for email addresses within the computer they have infected, and use those addresses both as targets for email, but also to create credible forged From fields in the emails that they send, so that these emails are more likely to be opened. For example:
- Alice is sent an infected email which she opens, running the worm code.
- The worm code searches Alice's email address book and finds the addresses of Bob and Charlie.
- From Alice's computer, the worm sends an infected email to Bob, but forged to appear to have been sent by Charlie.
In this case, even if Bob's system detects the incoming mail as containing malware, he sees the source as being Charlie, even though it really came from Alice's computer; meanwhile Alice may remain unaware that her computer has been infected.
Email Spoofing in the MediaEdit
Email spoofing has been responsible for public incidents with serious business and financial consequences.
In the early Internet, "legitimately spoofed" email was common. For example, a visiting user might use the local organization's SMTP server to send email from the user's foreign address. Since most servers were configured as "open relays", this was a common practice. As spam email became an annoying problem, these sorts of "legitimate" uses fell out of favor.
When multiple software systems communicate with each other via email, spoofing may be required in order to facilitate such communication. In any scenario where an email address is set up to automatically forward incoming emails to a system which only accepts emails from the email forwarder, spoofing is required in order to facilitate this behavior. This is common between ticketing systems which communicate with other ticketing systems.
The effect on mailserversEdit
Traditionally, mail servers could accept a mail item, then later send a Non-Delivery Report or "bounce" message if it couldn't be delivered or had been quarantined for any reason. These would be sent to the "MAIL FROM:" aka "Return Path" address. With the massive rise in forged addresses, Best Practice is now to not generate NDRs for detected spam, viruses etc. but to reject the email during the SMTP transaction. When mail administrators fail to take this approach, their systems are guilty of sending "backscatter" emails to innocent parties - in itself a form of spam - or being used to perform "Joe job" attacks.
Identifying the source of the emailEdit
Although email spoofing is effective in forging the email address, the IP address of the computer sending the mail can generally be identified from the "Received:" lines in the email header. In many cases this is likely to be an innocent third party infected by malware that is sending the email without the owner's knowledge.
The SSL/TLS system used to encrypt server-to-server email traffic can also be used to enforce authentication, but in practice it is seldom used, and a range of other potential solutions have also failed to gain traction.
However a number of effective systems are now widely used, including:
Although their use is increasing, estimates vary widely as to what percentage of emails have no form of domain authentication: from 8.6% to "almost half". To effectively stop forged email being delivered, the sending domains, their mail servers, and the receiving system all need to be configured correctly for these higher standards of authentication.
As modern countermeasures prevent spammers from spoofing the envelope-from address, many have moved to utilising the header-from address as seen by the recipient user rather than processed by the recipient MTA. Proprietary implementation beyond the scope of the SPF schema is required to protect against certain header-from spoofing implementations.
To protect users from spam, big mail providers adopt a whitelist practice. ISP provider networks which are used for mobile internet users or home internet are often blocked by ASN identifier. The idea behind this blocking is to reduce, or stop altogether, the email flow from compromised home computers. End-user PCs are infected more frequently, and usually people don't host an MTA at home.
- Siebenmann, Chris. "A quick overview of SMTP". University of Toronto. Retrieved 2019-04-08.
- Barnes, Bill (2002-03-12). "E-Mail Impersonators". Retrieved 2019-04-08.
- "Fraudsters' fingerprints on fake Samsung deal". Retrieved 2019-04-08.
- See RFC3834
- "e-mail impersonators: identifying "spoofed" e-mail". Archived from the original on 2017-06-21. Retrieved 2019-04-08.
- "Transport Layer Security for Inbound Mail". Google Postini Services. Archived from the original on 2016-11-11. Retrieved 2019-04-08.
- Bursztein, Elie; Eranti, Vijay (2013-12-06). "Internet-wide efforts to fight email phishing are working". Google Security Blog. Retrieved 2019-04-08.
- Eggert, Lars. "SPF Deployment Trends". Archived from the original on 2016-04-02. Retrieved 2019-04-08.
- Eggert, Lars. "DKIM Deployment Trends". Archived from the original on 2018-08-22. Retrieved 2019-04-08.
- "In First Year, DMARC Protects 60 Percent of Global Consumer Mailboxes". dmarc.org. 2013-02-06. Retrieved 2019-04-08.
- "Create an MIMECAST inbound lockout policy to STOP Email SPOOFING". Archived from the original on 2018-08-26. Retrieved 2019-04-08.
- "Prevent spoofed messages with spoofed senders detection". Retrieved 2019-04-08.
- "Anti-spoofing protection in Office 365". Retrieved 2019-04-08.