Elastics are rubber bands frequently used in the field of orthodontics to correct different type of malocclusions. The elastic wear is prescribed by an orthodontist or a dentist in an orthodontic treatment, which involves the use of dental braces and other appliances to slowly move the teeth and jaws around. Orthodontic elastics may also be used with clear aligner treatment, especially when complex tooth movements are required or if bite adjustments are needed. The longevity of the elastic wear may vary from two weeks to several months. The elastic wear can be worn from 12 to 23 hours a day, either during the night or throughout the day depending on the requirements for each malocclusion. The many different types of elastics may produce different forces on teeth. Therefore, using elastics with specific forces is critical in achieving a good orthodontic occlusion.
The term intermaxillary elastics is used when elastics can go from the maxillary to the mandibular arch. Intra-maxillary elastics are elastics used in one arch only, either mandibular or maxillary. People using elastics for orthodontic correction change their elastics three to four times during the day. Elastic wear is recommend to be used in a rectangular wire to minimize side effects. Elastic wear depends on the compliance of the patient. A non-compliant patient should never be instructed to continue wearing elastics, for whom other options may be considered.
Natural rubber, used by the Incan and Mayan cultures, was the first known elastomer. Charles Goodyear developed the process of vulcanization, after which the use of natural rubber increased. Henry Albert Baker is the first person known to have used elastics to correct the position of teeth. In the late 1800s he named his elastic wear the Baker Anchorage. Others, including Edward Angle, the father of orthodontics, suggest that Calvin Case was the first to use intermaxillary elastics.
Natural rubber is known to absorb water, and its elasticity deteriorates fairly quickly. Therefore, latex elastics became prominent in orthodontic usage in the early 1900s. Later synthetic elastics developed in the 1960s superseded other types of elastics for use in orthodontic correction.
Elastics are available in many different type of forces. Following is the list of forces that can be found in different elastics. The forces and the labelling of the forces may depend on different manufacturers and types of elastics used. These forces pertain to intermaxillary elastics.
|Force Rating||Force (oz.)||Force (g)|
|Light||2 oz.||56.7 g|
|Medium-Light||3 1/2 oz.||99.2 g|
|Medium||4 oz.||113.4 g|
|Medium-Heavy||5 1/2 oz.||155.9 g|
|Heavy||6 oz.||170.1 g|
|Extra Heavy||8 oz.||226.8 g|
Class II elasticsEdit
Class 2 elastics are used from the lower first molar to the upper canine tooth. They can be used for many different reasons, such as Class 2 malocclusions, to reinforce anchorage in a case where an extraction has been done, to allow the maxillary incisors to move backwards, and to correct midline deviation and allow buccal movement of backward-tipped lower incisors. Orthodontists generally use 12-16 oz elastics (3/16") in extraction cases or 2× 6 oz elastics on either side of the mouth (3/16"), but in non extraction cases 16-20 oz elastics (3/16") or 2× 8 oz elastics are used. It is very important to know the side effects of Class II elastics before using them in an orthodontic treatment. The following are the effects of Class 2 elastics:
- Extrusion of upper incisors
- Extrusion of lower first molar
- Flaring of the lower incisors
- Distal movement of the upper teeth and mesial movement of the lower teeth
- Steepening of the occlusal plane
Effect on Class II MalocclusionEdit
A systematic review done by Janson et al. looking at the effect of Class 2 elastics in correcting class II malocclusions concluded that Class II elastics are effective in correcting Class II malocclusions and that their effects are primarily dento-alveolar. Their side effects primarily included flaring of mandibular incisors, loss of mandibular anchorage (molars moving forward) and worsening of smile esthetics due to extrusion of upper incisors.
Class III elasticsEdit
Class 3 elastics are used when the molar relationship is close to Class 1 malocclusion. Class 3 malocclusions can be corrected with Class 3 elastics depending on severity. Asymmetric Class III elastics may be used if the Class 3 malocclusion is asymmetrical. It is important to evaluate soft tissue and hard tissue esthetics of a patient before attempting to use Class 3 elastics. Elastic wear will only produce changes in dentition, with no documented changes produced in soft and hard tissue. The following are the side-effects of Class 3 elastics:
- Distal movement of the lower teeth and mesial movement of the upper teeth
- Flaring of the upper incisors
- Extrusion of the lower incisors
- Extrusion of the upper first molar
- Flattening of the occlusal plane
The small elastic band used to affix the archwire to the bracket is called a ligature. Usually changed at each adjustment, these come in many varied colours, including transparent. A series of ligatures connected to each other and used to pull teeth together with more strength is called a power chain. Ligatures can also be made of wire. Self-ligation makes use of a bracket with a sliding or rotating mechanism to ligate an archwire. This type of bracket replaces traditional elastic ligatures and typically cuts orthodontic appointment times drastically. Currently, self-ligating brackets make up about 10 percent of total bracket sales worldwide.
- "All about elastics". Orthodontics Australia. Retrieved December 6, 2019.
- Nolting, Paul R. (August 1, 1937). "Intermaxillary elastics". International Journal of Orthodontia and Oral Surgery. 23 (8): 812–813. doi:10.1016/S1072-3498(37)80050-3.
- Stewart, C. M.; Chaconas, S. J.; Caputo, A. A. (April 1, 1978). "Effects of intermaxillary elastic traction on orthodontic tooth movement". Journal of Oral Rehabilitation. 5 (2): 159–166. doi:10.1111/j.1365-2842.1978.tb01209.x. ISSN 0305-182X. PMID 280630.
- "Charles Goodyear | Goodyear Corporate". corporate.goodyear.com. Retrieved September 3, 2016.
- "Timisoara Medical Journal -The Effect of Intermaxillary Elastics in Orthodontic Therapy". www.tmj.ro. Retrieved September 3, 2016.
- Janson, Guilherme; Sathler, Renata; Fernandes, Thais Maria Freire; Branco, Nuria Cabral Castello; Freitas, Marcos Roberto de (March 1, 2013). "Correction of Class II malocclusion with Class II elastics: a systematic review". American Journal of Orthodontics and Dentofacial Orthopedics. 143 (3): 383–392. doi:10.1016/j.ajodo.2012.10.015. ISSN 1097-6752. PMID 23452973.
- Janson, Guilherme; Sathler, Renata; Fernandes, Thais Maria Freire; Branco, Nuria Cabral Castello; de Freitas, Marcos Roberto (March 1, 2013). "Correction of Class II malocclusion with Class II elastics: A 2013 systematic review of 11 studies". American Journal of Orthodontics and Dentofacial Orthopedics. 143 (3): 383–392. doi:10.1016/j.ajodo.2012.10.015. PMID 23452973.
- Janson, Guilherme; de Freitas, Marcos Roberto; Araki, Janine; Franco, Eduardo Jacomino; Barros, Sérgio Estelita Cavalcante (August 1, 2010). "Class III subdivision malocclusion corrected with asymmetric intermaxillary elastics". American Journal of Orthodontics and Dentofacial Orthopedics. 138 (2): 221–230. doi:10.1016/j.ajodo.2008.08.036. ISSN 1097-6752. PMID 20691365.
- Zimmer, Bernd; Nischwitz, Diana (September 1, 2012). "Therapeutic changes in the occlusal plane inclination using intermaxillary elastics". Journal of Orofacial Orthopedics. 73 (5): 377–386. doi:10.1007/s00056-012-0100-5. ISSN 1615-6714. PMID 22955576.