In mathematics, differential calculus is a subfield of calculus that studies the rates at which quantities change.[1] It is one of the two traditional divisions of calculus, the other being integral calculus—the study of the area beneath a curve.[2]

The graph of a function, drawn in black, and a tangent line to that function, drawn in red. The slope of the tangent line equals the derivative of the function at the marked point.

The primary objects of study in differential calculus are the derivative of a function, related notions such as the differential, and their applications. The derivative of a function at a chosen input value describes the rate of change of the function near that input value. The process of finding a derivative is called differentiation. Geometrically, the derivative at a point is the slope of the tangent line to the graph of the function at that point, provided that the derivative exists and is defined at that point. For a real-valued function of a single real variable, the derivative of a function at a point generally determines the best linear approximation to the function at that point.

Differential calculus and integral calculus are connected by the fundamental theorem of calculus, which states that differentiation is the reverse process to integration.

Differentiation has applications in nearly all quantitative disciplines. In physics, the derivative of the displacement of a moving body with respect to time is the velocity of the body, and the derivative of the velocity with respect to time is acceleration. The derivative of the momentum of a body with respect to time equals the force applied to the body; rearranging this derivative statement leads to the famous F = ma equation associated with Newton's second law of motion. The reaction rate of a chemical reaction is a derivative. In operations research, derivatives determine the most efficient ways to transport materials and design factories.

Derivatives are frequently used to find the maxima and minima of a function. Equations involving derivatives are called differential equations and are fundamental in describing natural phenomena. Derivatives and their generalizations appear in many fields of mathematics, such as complex analysis, functional analysis, differential geometry, measure theory, and abstract algebra.

Derivative edit

 
The graph of an arbitrary function  . The orange line is tangent to  , meaning at that exact point, the slope of the curve and the straight line are the same.
 
The derivative at different points of a differentiable function

The derivative of   at the point   is the slope of the tangent to  .[3] In order to gain an intuition for this, one must first be familiar with finding the slope of a linear equation, written in the form  . The slope of an equation is its steepness. It can be found by picking any two points and dividing the change in   by the change in  , meaning that  . For, the graph of   has a slope of  , as shown in the diagram below:

 
The graph of  
 

For brevity,   is often written as  , with   being the Greek letter delta, meaning 'change in'. The slope of a linear equation is constant, meaning that the steepness is the same everywhere. However, many graphs such as   vary in their steepness. This means that you can no longer pick any two arbitrary points and compute the slope. Instead, the slope of the graph can be computed by considering the tangent line—a line that 'just touches' a particular point.[a] The slope of a curve at a particular point is equal to the slope of the tangent to that point. For example,   has a slope of   at   because the slope of the tangent line to that point is equal to  :

 
The graph of  , with a straight line that is tangent to  . The slope of the tangent line is equal to  . (The axes of the graph do not use a 1:1 scale.)

The derivative of a function is then simply the slope of this tangent line.[b] Even though the tangent line only touches a single point at the point of tangency, it can be approximated by a line that goes through two points. This is known as a secant line. If the two points that the secant line goes through are close together, then the secant line closely resembles the tangent line, and, as a result, its slope is also very similar:

 
The dotted line goes through the points   and  , which both lie on the curve  . Because these two points are fairly close together, the dotted line and tangent line have a similar slope. As the two points become closer together, the error produced by the secant line becomes vanishingly small.

The advantage of using a secant line is that its slope can be calculated directly. Consider the two points on the graph   and  , where   is a small number. As before, the slope of the line passing through these two points can be calculated with the formula  . This gives

 

As   gets closer and closer to  , the slope of the secant line gets closer and closer to the slope of the tangent line. This is formally written as

 

The above expression means 'as   gets closer and closer to 0, the slope of the secant line gets closer and closer to a certain value'. The value that is being approached is the derivative of  ; this can be written as  . If  , the derivative can also be written as  , with   representing an infinitesimal change. For example,   represents an infinitesimal change in x.[c] In summary, if  , then the derivative of   is

 

provided such a limit exists.[4][d] We have thus succeeded in properly defining the derivative of a function, meaning that the 'slope of the tangent line' now has a precise mathematical meaning. Differentiating a function using the above definition is known as differentiation from first principles. Here is a proof, using differentiation from first principles, that the derivative of   is  :

 

As   approaches  ,   approaches  . Therefore,  . This proof can be generalised to show that   if   and   are constants. This is known as the power rule. For example,  . However, many other functions cannot be differentiated as easily as polynomial functions, meaning that sometimes further techniques are needed to find the derivative of a function. These techniques include the chain rule, product rule, and quotient rule. Other functions cannot be differentiated at all, giving rise to the concept of differentiability.

A closely related concept to the derivative of a function is its differential. When x and y are real variables, the derivative of f at x is the slope of the tangent line to the graph of f at x. Because the source and target of f are one-dimensional, the derivative of f is a real number. If x and y are vectors, then the best linear approximation to the graph of f depends on how f changes in several directions at once. Taking the best linear approximation in a single direction determines a partial derivative, which is usually denoted y/x. The linearization of f in all directions at once is called the total derivative.

History of differentiation edit

The concept of a derivative in the sense of a tangent line is a very old one, familiar to ancient Greek mathematicians such as Euclid (c. 300 BC), Archimedes (c. 287–212 BC) and Apollonius of Perga (c. 262–190 BC).[5] Archimedes also made use of indivisibles, although these were primarily used to study areas and volumes rather than derivatives and tangents (see The Method of Mechanical Theorems). The use of infinitesimals to compute rates of change was developed significantly by Bhāskara II (1114–1185); indeed, it has been argued[6] that many of the key notions of differential calculus can be found in his work, such as "Rolle's theorem".[7]

The mathematician, Sharaf al-Dīn al-Tūsī (1135–1213), in his Treatise on Equations, established conditions for some cubic equations to have solutions, by finding the maxima of appropriate cubic polynomials. He obtained, for example, that the maximum (for positive x) of the cubic ax2x3 occurs when x = 2a / 3, and concluded therefrom that the equation ax2 = x3 + c has exactly one positive solution when c = 4a3 / 27, and two positive solutions whenever 0 < c < 4a3 / 27.[8][page needed] The historian of science, Roshdi Rashed,[8][page needed] has argued that al-Tūsī must have used the derivative of the cubic to obtain this result. Rashed's conclusion has been contested by other scholars, however, who argue that he could have obtained the result by other methods which do not require the derivative of the function to be known.[8][page needed]

The modern development of calculus is usually credited to Isaac Newton (1643–1727) and Gottfried Wilhelm Leibniz (1646–1716), who provided independent[e] and unified approaches to differentiation and derivatives. The key insight, however, that earned them this credit, was the fundamental theorem of calculus relating differentiation and integration: this rendered obsolete most previous methods for computing areas and volumes.[f] For their ideas on derivatives, both Newton and Leibniz built on significant earlier work by mathematicians such as Pierre de Fermat (1607-1665), Isaac Barrow (1630–1677), René Descartes (1596–1650), Christiaan Huygens (1629–1695), Blaise Pascal (1623–1662) and John Wallis (1616–1703). Regarding Fermat's influence, Newton once wrote in a letter that "I had the hint of this method [of fluxions] from Fermat's way of drawing tangents, and by applying it to abstract equations, directly and invertedly, I made it general."[9] Isaac Barrow is generally given credit for the early development of the derivative.[10] Nevertheless, Newton and Leibniz remain key figures in the history of differentiation, not least because Newton was the first to apply differentiation to theoretical physics, while Leibniz systematically developed much of the notation still used today.

Since the 17th century many mathematicians have contributed to the theory of differentiation. In the 19th century, calculus was put on a much more rigorous footing by mathematicians such as Augustin Louis Cauchy (1789–1857), Bernhard Riemann (1826–1866), and Karl Weierstrass (1815–1897). It was also during this period that the differentiation was generalized to Euclidean space and the complex plane.

The 20th century brought two major steps towards our present understanding and practice of derivation : Lebesgue integration, besides extending integral calculus to many more functions, clarified the relation between derivation and integration with the notion of absolute continuity. Later the theory of distributions (after Laurent Schwartz) extended derivation to generalized functions (e.g., the Dirac delta function previously introduced in Quantum Mechanics) and became fundamental to nowadays applied analysis especially by the use of weak solutions to partial differential equations.

Applications of derivatives edit

Optimization edit

If f is a differentiable function on (or an open interval) and x is a local maximum or a local minimum of f, then the derivative of f at x is zero. Points where f'(x) = 0 are called critical points or stationary points (and the value of f at x is called a critical value). If f is not assumed to be everywhere differentiable, then points at which it fails to be differentiable are also designated critical points.

If f is twice differentiable, then conversely, a critical point x of f can be analysed by considering the second derivative of f at x :

  • if it is positive, x is a local minimum;
  • if it is negative, x is a local maximum;
  • if it is zero, then x could be a local minimum, a local maximum, or neither. (For example, f(x) = x3 has a critical point at x = 0, but it has neither a maximum nor a minimum there, whereas f(x) = ± x4 has a critical point at x = 0 and a minimum and a maximum, respectively, there.)

This is called the second derivative test. An alternative approach, called the first derivative test, involves considering the sign of the f' on each side of the critical point.

Taking derivatives and solving for critical points is therefore often a simple way to find local minima or maxima, which can be useful in optimization. By the extreme value theorem, a continuous function on a closed interval must attain its minimum and maximum values at least once. If the function is differentiable, the minima and maxima can only occur at critical points or endpoints.

This also has applications in graph sketching: once the local minima and maxima of a differentiable function have been found, a rough plot of the graph can be obtained from the observation that it will be either increasing or decreasing between critical points.

In higher dimensions, a critical point of a scalar valued function is a point at which the gradient is zero. The second derivative test can still be used to analyse critical points by considering the eigenvalues of the Hessian matrix of second partial derivatives of the function at the critical point. If all of the eigenvalues are positive, then the point is a local minimum; if all are negative, it is a local maximum. If there are some positive and some negative eigenvalues, then the critical point is called a "saddle point", and if none of these cases hold (i.e., some of the eigenvalues are zero) then the test is considered to be inconclusive.

Calculus of variations edit

One example of an optimization problem is: Find the shortest curve between two points on a surface, assuming that the curve must also lie on the surface. If the surface is a plane, then the shortest curve is a line. But if the surface is, for example, egg-shaped, then the shortest path is not immediately clear. These paths are called geodesics, and one of the most fundamental problems in the calculus of variations is finding geodesics. Another example is: Find the smallest area surface filling in a closed curve in space. This surface is called a minimal surface and it, too, can be found using the calculus of variations.

Physics edit

Calculus is of vital importance in physics: many physical processes are described by equations involving derivatives, called differential equations. Physics is particularly concerned with the way quantities change and develop over time, and the concept of the "time derivative" — the rate of change over time — is essential for the precise definition of several important concepts. In particular, the time derivatives of an object's position are significant in Newtonian physics:

  • velocity is the derivative (with respect to time) of an object's displacement (distance from the original position)
  • acceleration is the derivative (with respect to time) of an object's velocity, that is, the second derivative (with respect to time) of an object's position.

For example, if an object's position on a line is given by

 

then the object's velocity is

 

and the object's acceleration is

 

which is constant.

Differential equations edit

A differential equation is a relation between a collection of functions and their derivatives. An ordinary differential equation is a differential equation that relates functions of one variable to their derivatives with respect to that variable. A partial differential equation is a differential equation that relates functions of more than one variable to their partial derivatives. Differential equations arise naturally in the physical sciences, in mathematical modelling, and within mathematics itself. For example, Newton's second law, which describes the relationship between acceleration and force, can be stated as the ordinary differential equation

 

The heat equation in one space variable, which describes how heat diffuses through a straight rod, is the partial differential equation

 

Here u(x,t) is the temperature of the rod at position x and time t and α is a constant that depends on how fast heat diffuses through the rod.

Mean value theorem edit

 
The mean value theorem: For each differentiable function   with   there is a   with  .

The mean value theorem gives a relationship between values of the derivative and values of the original function. If f(x) is a real-valued function and a and b are numbers with a < b, then the mean value theorem says that under mild hypotheses, the slope between the two points (a, f(a)) and (b, f(b)) is equal to the slope of the tangent line to f at some point c between a and b. In other words,

 

In practice, what the mean value theorem does is control a function in terms of its derivative. For instance, suppose that f has derivative equal to zero at each point. This means that its tangent line is horizontal at every point, so the function should also be horizontal. The mean value theorem proves that this must be true: The slope between any two points on the graph of f must equal the slope of one of the tangent lines of f. All of those slopes are zero, so any line from one point on the graph to another point will also have slope zero. But that says that the function does not move up or down, so it must be a horizontal line. More complicated conditions on the derivative lead to less precise but still highly useful information about the original function.

Taylor polynomials and Taylor series edit

The derivative gives the best possible linear approximation of a function at a given point, but this can be very different from the original function. One way of improving the approximation is to take a quadratic approximation. That is to say, the linearization of a real-valued function f(x) at the point x0 is a linear polynomial a + b(xx0), and it may be possible to get a better approximation by considering a quadratic polynomial a + b(xx0) + c(xx0)2. Still better might be a cubic polynomial a + b(xx0) + c(xx0)2 + d(xx0)3, and this idea can be extended to arbitrarily high degree polynomials. For each one of these polynomials, there should be a best possible choice of coefficients a, b, c, and d that makes the approximation as good as possible.

In the neighbourhood of x0, for a the best possible choice is always f(x0), and for b the best possible choice is always f'(x0). For c, d, and higher-degree coefficients, these coefficients are determined by higher derivatives of f. c should always be f''(x0)/2, and d should always be f'''(x0)/3!. Using these coefficients gives the Taylor polynomial of f. The Taylor polynomial of degree d is the polynomial of degree d which best approximates f, and its coefficients can be found by a generalization of the above formulas. Taylor's theorem gives a precise bound on how good the approximation is. If f is a polynomial of degree less than or equal to d, then the Taylor polynomial of degree d equals f.

The limit of the Taylor polynomials is an infinite series called the Taylor series. The Taylor series is frequently a very good approximation to the original function. Functions which are equal to their Taylor series are called analytic functions. It is impossible for functions with discontinuities or sharp corners to be analytic; moreover, there exist smooth functions which are also not analytic.

Implicit function theorem edit

Some natural geometric shapes, such as circles, cannot be drawn as the graph of a function. For instance, if f(x, y) = x2 + y2 − 1, then the circle is the set of all pairs (x, y) such that f(x, y) = 0. This set is called the zero set of f, and is not the same as the graph of f, which is a paraboloid. The implicit function theorem converts relations such as f(x, y) = 0 into functions. It states that if f is continuously differentiable, then around most points, the zero set of f looks like graphs of functions pasted together. The points where this is not true are determined by a condition on the derivative of f. The circle, for instance, can be pasted together from the graphs of the two functions ± 1 - x2. In a neighborhood of every point on the circle except (−1, 0) and (1, 0), one of these two functions has a graph that looks like the circle. (These two functions also happen to meet (−1, 0) and (1, 0), but this is not guaranteed by the implicit function theorem.)

The implicit function theorem is closely related to the inverse function theorem, which states when a function looks like graphs of invertible functions pasted together.

See also edit

Notes edit

  1. ^ This is not a formal definition of what a tangent line is. The definition of the derivative as a limit makes rigorous this notion of tangent line.
  2. ^ Though the technical definition of a function is somewhat involved, it is easy to appreciate what a function is intuitively. A function takes an input and produces an output. For example, the function   takes a number and squares it. The number that the function performs an operation on is often represented using the letter  , but there is no difference whatsoever between writing   and writing  . For this reason,   is often described as a 'dummy variable'.
  3. ^ The term infinitesimal can sometimes lead people to wrongly believe there is an 'infinitely small number'—i.e. a positive real number that is smaller than any other real number. In fact, the term 'infinitesimal' is merely a shorthand for a limiting process. For this reason,   is not a fraction—rather, it is the limit of a fraction.
  4. ^ Not every function can be differentiated, hence why the definition only applies if 'the limit exists'. For more information, see the Wikipedia article on differentiability.
  5. ^ Newton began his work in 1665 and Leibniz began his in 1676. However, Leibniz published his first paper in 1684, predating Newton's publication in 1693. It is possible that Leibniz saw drafts of Newton's work in 1673 or 1676, or that Newton made use of Leibniz's work to refine his own. Both Newton and Leibniz claimed that the other plagiarized their respective works. This resulted in a bitter controversy between them over who first invented calculus, which shook the mathematical community in the early 18th century.
  6. ^ This was a monumental achievement, even though a restricted version had been proven previously by James Gregory (1638–1675), and some key examples can be found in the work of Pierre de Fermat (1601–1665).

References edit

Citations edit

  1. ^ "Definition of DIFFERENTIAL CALCULUS". www.merriam-webster.com. Retrieved 2020-05-09.
  2. ^ "Definition of INTEGRAL CALCULUS". www.merriam-webster.com. Retrieved 2020-05-09.
  3. ^ Alcock, Lara (2016). How to Think about Analysis. New York: Oxford University Press. pp. 155–157. ISBN 978-0-19-872353-0.
  4. ^ Weisstein, Eric W. "Derivative". mathworld.wolfram.com. Retrieved 2020-07-26.
  5. ^ See Euclid's Elements, The Archimedes Palimpsest and O'Connor, John J.; Robertson, Edmund F., "Apollonius of Perga", MacTutor History of Mathematics Archive, University of St Andrews
  6. ^ Ian G. Pearce. Bhaskaracharya II. Archived 2016-09-01 at the Wayback Machine
  7. ^ Broadbent, T. A. A.; Kline, M. (October 1968). "Reviewed work(s): The History of Ancient Indian Mathematics by C. N. Srinivasiengar". The Mathematical Gazette. 52 (381): 307–8. doi:10.2307/3614212. JSTOR 3614212. S2CID 176660647.
  8. ^ a b c Berggren 1990.
  9. ^ Sabra, A I. (1981). Theories of Light: From Descartes to Newton. Cambridge University Press. p. 144. ISBN 978-0521284363.
  10. ^ Eves, H. (1990).

Works cited edit

  • Berggren, J. L. (1990). "Innovation and Tradition in Sharaf al-Din al-Tusi's Muadalat". Journal of the American Oriental Society. 110 (2): 304–309. doi:10.2307/604533. JSTOR 604533.

Other sources edit

  • J. Edwards (1892). Differential Calculus. London: MacMillan and Co. p. 1.
  • Boman, Eugene, and Robert Rogers. Differential Calculus: From Practice to Theory. 2022, personal.psu.edu/ecb5/DiffCalc.pdf [1] Archived 2022-12-20 at the Wayback Machine.