The Curtiss P-60 was a 1940s United States single-engine single-seat, low-wing monoplane fighter aircraft developed by the Curtiss-Wright company as a successor to their P-40. It went through a lengthy series of prototype versions, eventually evolving into a design that bore little resemblance to the P-40. None of these versions reached production.
|Curtiss XP-60C in flight, powered by a Pratt & Whitney R-2800 engine driving contra-rotating propellers|
|First flight||18 September 1941|
|Retired||22 December 1944|
|Primary user||United States Army Air Forces|
|Number built||Five (all converted into new variants)|
|Program cost||$8.88 million USD|
|Developed from||Curtiss XP-46|
Design and developmentEdit
The initial design contained in proposals to the United States Army Air Corps was for an aircraft based upon the P-40 design but featuring a low drag laminar flow wing, a Continental XIV-1430-3 inverted vee engine, and eight wing-mounted 0.5 in (12.7 mm) machine guns. This proposal was accepted and a contract for two prototypes was issued on 1 October 1940 with the aircraft designated the XP-53.
Within two months the Army Air Corps modified the contract to require the second prototype be completed with a Rolls-Royce Merlin engine in place of the XIV-1430. That aircraft was re-designated XP-60. The airframe design for the XP-60 was modified for the different engine, and the main landing gear was changed from the rearward-retracting P-40 design to a new inward retracting version, which allowed a wider wheelbase and a smooth wing surface when the gear was retracted. This aircraft first flew on 18 September 1941 with a British-built Merlin 28 engine. The XP-53 prototype was then converted into a static test airframe for the XP-60.
Considering delivery delays of quantities of the Packard-built Merlin engines due to its use in other fighters, the use of a turbo-supercharged Allison V-1710-75 engine was considered in its place. Consequently, on 31 October 1941, a contract for 1,900 P-60A fighters using the Allison engine, was awarded.
In the meantime, flight tests of the XP-60 prototype were not progressing smoothly. In addition to landing gear problems, expected top speed was not being met due to shortcomings in the laminar-flow wing surface finish, relatively high radiator drag (compared to the North American P-51 Mustang, which was then flying), and less than specified engine output performance. Consequently, work on the P-60A was stopped on 20 December 1941, when the USAAC recommended that Curtiss concentrate on licence production of Republic P-47 Thunderbolts.
On 2 January 1942, the order was changed to produce one XP-60A with the Allison V-1710-75 engine and a General Electric B-14 turbo-supercharger, one XP-60B with the Allison V-1710-75 engine and a Wright SU-504-1 turbo-supercharger, and one XP-60C with the massive Chrysler XIV-2220 sixteen cylinder inverted vee engine.
At the time, availability of the Chrysler engine was coming into question, and after Curtiss noted that several hundreds of pounds of lead would be needed in the tail of the existing airframe for balance, a decision was made to install a Pratt & Whitney R-2800 radial engine in the XP-60C. In the meantime, Curtiss installed a Merlin 61 engine in the original XP-60, and after enlarging the vertical tail surface this aircraft was redesignated XP-60D.
The XP-60A first flew on 1 November 1942. While official interest in the P-60 waned during summer 1942, interest due to the promise of improved performance with the installation of the R-2800 engine resulted in a contract for 500 R-2800 powered P-60A-1-CU fighters with contra-rotating propellers. With concern that the contra-rotating propellers would not be available on time, the XP-60B was modified to take the R-2800-10 engine driving a four-bladed propeller. This modification was redesignated XP-60E.
On 27 January 1943, the XP-60C flew for the first time, powered by an R-2800-53 engine with contra-rotating propellers. The aircraft's flying characteristics were found to be generally satisfactory. The first flight of the XP-60E with the four-bladed propeller was delayed until 26 May 1943 after it was found that due to its lighter weight, the engine installation had to be moved 10 inches forward compared to the XP-60C.
In April 1943, the US Army Air Forces decided to conduct an evaluation of the various fighter aircraft in development and use, in order to eliminate the least desirable models. Curtiss was requested to have the XP-60E participate. As the XP-60E was not available, the company hurriedly prepared the XP-60C for the evaluation at Patterson Field. In the event, due to various issues, the XP-60C performed poorly, resulting in reduction of the production run of 500 aircraft to two aircraft.
In January 1944, the XP-60E was flown to Eglin Field for official trials, where Army Air Force pilots found that it did not compare favorably to contemporary aircraft designs. When Curtiss expressed the desire to abandon further work on the P-60 series, the Army Air Forces insisted upon completion of one of the two aircraft in production. The aircraft when originally ordered was designated YP-60A-1-CU and was redesignated YP-60E. This aircraft flew on 13 July 1944 and was subsequently delivered to Wright Field. The YP-60E differed mainly from the XP-60E by being powered by a 2,100 hp (1,566 kW) R-2800-18 engine as well as the fitting of an all-around vision bubble canopy.
With the development contracts cancelled in June 1943, the program ended ignobly when the last prototype was scrapped on 22 December 1944. To replace the P-60, Curtiss built 354 Republic P-47Gs instead for the USAAF. The XP-60E survived to be sold as an entry for the 1947 National Air Races, but crashed during a qualifying flight before the competition was held.
- Curtiss Model 88; derivative of XP-46 to Request for Data R40-C specifications. Laminar flow wing and Continental XIV-1430-3 engine. Contracted for 1 October 1940; cancelled in favor of XP-60 in November 1941. Two built, one converted to the XP-60, the other used as a static test airframe.
- Curtiss Model 90; Rolls-Royce Merlin engine, armament 8 .50-cal machine guns. One built, first flight 18 September 1941; modified to XP-60D.
- Curtiss Model 95A; Allison V-1710-75 engine with B-14 turbosupercharger; armament: six .50-cal MG. One built.
- Planned production version of XP-60; 1900 ordered, all cancelled.
- Pre-production version of P-60A-1 with single prop. Twenty-six ordered; two built; one rebuilt as YP-60E.
- Planned production version of XP-60C with Pratt & Whitney R-2800-18 engine and contraprop; armament: four .50-cal MG. 500 ordered; cancelled before any built.
- Curtiss Model 95B; V-1710-75 engine with SU-504-2 turbosupercharger; armament: six .50-cal MG. One built, modified to XP-60E.
- Curtiss Model 95C; planned for Chrysler XIV-2220 engine, built with R-2800-53 and contraprop; armament: six .50-cal MG. One built. Rebuilt as XP-60E; original XP-60E rebuilt as XP-60C.
- Rebuilt XP-60. Curtiss Model 90B; Packard V-1650-3 engine; crashed 6 May 1943.
- Rebuilt XP-60B. Curtiss Model 95D; R-2800-10 engine; crashed January 1944. XP-60C reconfigured to XP-60E status.
- Modified YP-60A-1 with bubble canopy. First flight 15 July 1944; cancelled 22 December 1944.
- Planned modification of YP-60A-1 with different model of R-2800; cancelled before conversion.
Data from Curtiss Aircraft 1907–1947
- Crew: 1
- Length: 33 ft 11 in (10.34 m)
- Wingspan: 41 ft 4 in (12.60 m)
- Height: 10 ft 9 in (3.28 m)
- Wing area: 275 sq ft (25.5 m2)
- Empty weight: 8,600 lb (3,901 kg)
- Gross weight: 11,835 lb (5,368 kg)
- Powerplant: 1 × Pratt & Whitney R-2800-53 18-cylinder air-cooled radial piston engine, 2,000 hp (1,500 kW)
- Propellers: 6-bladed contra-rotating constant-speed propeller
- Maximum speed: 414 mph (666 km/h, 360 kn) at 20,350 ft (6,200 m)
- Range: 315 mi (507 km, 274 nmi)
- Service ceiling: 35,000 ft (11,000 m)
- Rate of climb: 3,890 ft/min (19.8 m/s)
- Time to altitude: 30,000 ft (9,100 m) in 6 minutes
- Wing loading: 39.2 lb/sq ft (191 kg/m2)
- Power/mass: 0.19 hp/lb (0.31 kW/kg)
- Guns: 4 × 0.50 in (13 mm) M2 Browning machine guns
Aircraft of comparable role, configuration and era
- Focke-Wulf Fw 190
- Macchi C.202
- Messerschmitt Bf 109
- Mitsubishi A6M3 Zero
- Nakajima Ki-43
- Reggiane Re.2001
- Supermarine Spitfire
- Yakovlev Yak-9
- "Fact Sheet: Curtiss XP-60." National Museum of the United States Air Force. Retrieved: 10 July 2017.
- Norton 2008, p. 85.
- Jones 1975. p. 155.
- Dorr and Lake 1990, p. 113.
- Baugher, Joe. "Curtiss P-60." USAAC/USAAF/USAF Fighter and Pursuit Aircraft, 6 September 1999. Retrieved: 17 May 2011.
- Norton 2008, p. 80.
- "Curtiss P-60". www.joebaugher.com. Retrieved 2018-02-11.
- Norton 2008, p. 81.
- Norton 2008, pp. 83–85.
- Norton 2008, p. 83.
- Norton 2008, pp. 81–82.
- Norton 2008, p. 82.
- Bowers, Peter M. (1979). Curtiss aircraft, 1907-1947. London: Putnam. pp. 437–445. ISBN 0370100298.
- Bowers, Peter M. Curtiss Aircraft, 1907–1947. London: Putnam & Company Ltd., 1979. ISBN 978-0-370-10029-6.
- Dorr, Robert F. and Jon Lake. Fighters of the United States Air Force. London: Temple Press, 1990. ISBN 978-0-600-55094-5.
- Green, William. War Planes of the Second World War, Volume Four: Fighters. London: MacDonald & Co. (Publishers) Ltd., 1961 (Sixth impression 1969). ISBN 978-0-356-01448-7.
- Green, William and Gordon Swanborough. WW2 Aircraft Fact Files: US Army Air Force Fighters, Part 1. London: Macdonald and Jane's Publishers Ltd., 1977. ISBN 978-0-356-08218-9.
- Jones, Lloyd S. U.S. Fighters: 1925-1980s. Fallbrook, California: Aero Publishers, Inc., 1975. ISBN 978-0-8168-9200-6.
- Norton, Bill. U.S. Experimental & Prototype Aircraft Projects: Fighters 1939–1945. North Branch, Minnesota: Specialty Press, 2008, pp. 80–85. ISBN 978-1-58007-109-3.