Contactless smart card
A contactless smart card is a contactless credential whose dimensions are credit-card size. Its embedded integrated circuits can store (and sometimes process) data and communicate with a terminal via NFC. Commonplace uses include transit tickets, bank cards and passports.
There are two broad categories of contactless smart cards. Memory cards contain non-volatile memory storage components, and perhaps some specific security logic. Contactless smart cards contain read-only RFID called CSN (Card Serial Number) or UID, and a re-writeable smart card microchip that can be transcribed via radio waves.
A contactless smart card is characterized as follows:
- Dimensions are normally credit card size. The ID-1 of ISO/IEC 7810 standard defines them as 85.60 × 53.98 × 0.76 mm (3.370 × 2.125 × 0.030 in).
- Contains a security system with tamper-resistant properties (e.g. a secure cryptoprocessor, secure file system, human-readable features) and is capable of providing security services (e.g. confidentiality of information in the memory).
- Assets managed by way of a central administration systems, or applications, which receive or interchange information with the card, such as card hotlisting and updates for application data.
- Card data is transferred via radio waves to the central administration system through card read-write devices, such as point of sales devices, doorway access control readers, ticket readers, ATMs, USB-connected desktop readers, etc.
Contactless smart cards can be used for identification, authentication, and data storage. They also provide a means of effecting business transactions in a flexible, secure, standard way with minimal human intervention.
Since then, smart cards with contactless interfaces have been increasingly popular for payment and ticketing applications such as mass transit. Globally, contactless fare collection is being employed for efficiencies in public transit. The various standards emerging are local in focus and are not compatible, though the MIFARE Classic card from Philips has a large market share in the United States and Europe.
Smart cards are being introduced in personal identification and entitlement schemes at regional, national, and international levels. Citizen cards, drivers’ licenses, and patient card schemes are becoming more prevalent. In Malaysia, the compulsory national ID scheme MyKad includes 8 different applications and is rolled out for 18 million users. Contactless smart cards are being integrated into ICAO biometric passports to enhance security for international travel.
Contactless smart card readers use radio waves to communicate with, and both read and write data on a smart card. When used for electronic payment, they are commonly located near PIN pads, cash registers and other places of payment. When the readers are used for public transit they are commonly located on fare boxes, ticket machines, turnstiles, and station platforms as a standalone unit. When used for security, readers are usually located to the side of an entry door.
A contactless smart card is a card in which the chip communicates with the card reader through an induction technology similar to that of an RFID (at data rates of 106 to 848 kbit/s). These cards require only close proximity to an antenna to complete a transaction. They are often used when transactions must be processed quickly or hands-free, such as on mass transit systems, where a smart card can be used without even removing it from a wallet.
The standard for contactless smart card communications is ISO/IEC 14443. It defines two types of contactless cards ("A" and "B") and allows for communications at distances up to 10 cm (3.9 in). There had been proposals for ISO/IEC 14443 types C, D, E, F and G that have been rejected by the International Organization for Standardization. An alternative standard for contactless smart cards is ISO/IEC 15693, which allows communications at distances up to 50 cm (1.6 ft).
Examples of widely used contactless smart cards are Taiwan's EasyCard, Hong Kong's Octopus card, Shanghai's Public Transportation Card, South Korea's T-money (bus, subway, taxi), London's Oyster card, Beijing's Municipal Administration and Communications Card, Southern Ontario's Presto card, Japan Rail's Suica Card, the San Francisco Bay Area's Clipper Card, Melbourne's Myki Card, Sydney's Opal Card and India's More Card which predate the ISO/IEC 14443 standard. The following tables list smart cards used for public transportation and other electronic purse applications.
A related contactless technology is RFID (radio frequency identification). In certain cases, it can be used for applications similar to those of contactless smart cards, such as for electronic toll collection. RFID devices usually do not include writeable memory or microcontroller processing capability as contactless smart cards often do.[dubious ]
There are dual-interface cards that implement contactless and contact interfaces on a single card with some shared storage and processing. An example is Porto's multi-application transport card, called Andante, that uses a chip in contact and contactless (ISO/IEC 14443 type B) mode.
Like smart cards with contacts, contactless cards do not have a battery. Instead, they use a built-in inductor, using the principle of resonant inductive coupling, to capture some of the incident electromagnetic signal, rectify it, and use it to power the card's electronics.
|ISO/IEC 14443||APDU transmission via the protocol defined in ISO/IEC 14443-4|
In a number of cases these cards carry an electronic wallet as well as fare products, and can be used for low-value payments.
Contactless bank cardsEdit
Starting around 2005, a major application of the technology has been contactless payment credit and debit cards. Some major examples include:
- ExpressPay – American Express
- MasterCard Contactless (formerly PayPass) – MasterCard
- Visa Contactless (formerly payWave) – Visa
- QuickPass – UnionPay
- QUICPay (overseas J/Speedy) – JCB
- RuPay Contactless - RuPay
- Zip – Discover
In general there are two classes of contactless bank cards: magnetic stripe data (MSD) and contactless EMV.
Contactless MSD cards are similar to magnetic stripe cards in terms of the data they share across the contactless interface. They are only distributed in the U.S. Payment occurs in a similar fashion to mag-stripe, without a PIN and often in off-line mode (depending on parameters of the terminal). The security level of such a transaction is better than a mag-stripe card, as the chip cryptographically generates a code which can be verified by the card issuer's systems.
Contactless EMV cards have two interfaces (contact and contactless) and work as a normal EMV card via their contact interface. The contactless interface provides similar data to a contact EMV transaction, but usually a subset of the capabilities (e.g. usually issuers will not allow balances to be increased via the contactless interface, instead requiring the card to be inserted into a device which uses the contact interface). EMV cards may carry an "offline balance" stored in their chip, similar to the electronic wallet or "purse" that users of transit smart cards are used to.
A quickly growing application is in digital identification cards. In this application, the cards are used for authentication of identity. The most common example is in conjunction with a PKI. The smart card will store an encrypted digital certificate issued from the PKI along with any other relevant or needed information about the card holder. Examples include the U.S. Department of Defense (DoD) Common Access Card (CAC), and the use of various smart cards by many governments as identification cards for their citizens. When combined with biometrics, smart cards can provide two- or three-factor authentication. Smart cards are not always a privacy-enhancing technology, for the subject carries possibly incriminating information about him all the time. By employing contactless smart cards, that can be read without having to remove the card from the wallet or even the garment it is in, one can add even more authentication value to the human carrier of the cards.
The Malaysian government uses smart card technology in the identity cards carried by all Malaysian citizens and resident non-citizens. The personal information inside the smart card (called MyKad) can be read using special APDU commands.
Smart cards have been advertised as suitable for personal identification tasks, because they are engineered to be tamper resistant. The embedded chip of a smart card usually implements some cryptographic algorithm. There are, however, several methods of recovering some of the algorithm's internal state.
Differential power analysisEdit
Differential power analysis involves measuring the precise time and electric current[dubious ] required for certain encryption or decryption operations. This is most often used against public key algorithms such as RSA in order to deduce the on-chip private key, although some implementations of symmetric ciphers can be vulnerable to timing or power attacks as well.
Smart cards can be physically disassembled by using acid, abrasives, or some other technique to obtain direct, unrestricted access to the on-board microprocessor. Although such techniques obviously involve a fairly high risk of permanent damage to the chip, they permit much more detailed information (e.g. photomicrographs of encryption hardware) to be extracted.
Eavesdrop on NFC communicationEdit
Short distance (≈10cm. or 4″) is required for supplying power. The radio frequency, however, can be eavesdropped within several meters.
- Failure rate
- The plastic card in which the chip is embedded is fairly flexible, and the larger the chip, the higher the probability of breaking. Smart cards are often carried in wallets or pockets — a fairly harsh environment for a chip. However, for large banking systems, the failure-management cost can be more than offset by the fraud reduction. A card enclosure may be used as an alternative to help prevent the smart card from failing.
- Using a smart card for mass transit presents a risk for privacy, because such a system enables the mass transit operator, the banks, and the authorities, to track the movement of individuals. The same argument can be made for banks tracking retail payments. Such information was used in the investigation of the Myyrmanni bombing.
- Theft and fraud
- Contactless technology does not necessarily prevent use of a PIN for authentication of the user, but it is common for low value transactions (bank credit or debit card purchase, or public transport fare payment) not to require a PIN. This may make such cards more likely to be stolen, or used fraudulently by the finder of someone else's lost card.
- Use abroad
- Inland data networks quickly convey information between terminals and central banking systems, such that contactless payment limits may be monitored and managed. This may not be possible with use of such cards when abroad.
- Multiple cards detection
- When two or more contactless cards are in close proximity the system may have difficulty determining which card is intended to be used. The card-reader may charge the incorrect card or reject both. This is generally only an issue where a service provider uses a payment card to facilitate access - eg a wallet containing a parking lot access card, an apartment building entry card and various contactless payment cards can usually be used on entry to a car park or whatever - the car park entry system can detect its own card in the wallet and open the barrier. In a retail shop, however, it is advisable to remove the individual contactless card from the wallet when making a payment. At the very least this gives the cardholder the opportunity to communicate which card they intend to be used to make payment. It is an issue of the card identifying a subscription -v- payment by transaction.[clarification needed]
- Access badge
- Access control
- Android Pay
- Apple Pay
- Biometric passport
- Common Access Card
- Contactless payment
- Electronic money
- Identity document
- Java Card
- List of smart cards
- Magnetic stripe card
- Near field communication
- Octopus Card
- Payment Card Industry Data Security Standard
- Proximity card
- Radio-frequency identification
- Security engineering
- Single sign-on
- Smart card
- Subscriber identity module
- Telephone card
- ISO/IEC 7810:2003 Identification cards — Physical characteristics
- Multi-application Smart Cards. Cambridge University Press.
- Ugo,, Chirico,. Smart card programming : a comprehensive guide to smart card programming in C/C++, Java, C#, VB.NET (Second ed.). [Place of publication not identified]. ISBN 1291610502. OCLC 922633321.
- "4th Asian Transport Revenue Collection Forum". Asia Pacific Smart Card Association. 2010.
- Smartcard Alliance FAQ on contactless bank cards
- ISO/IEC 14443-2:2001 Identification cards – Contactless integrated circuit(s) cards – Proximity cards – Part 2: Radio frequency power and signal interface
- ISO/IEC 14443-4:2008 Identification cards – Contactless integrated circuit cards – Proximity cards – Part 4: Transmission protocol
- "ComfortDelgro introduces contactless credit card payment". contactless credit card payment.
- MyKad website
- Power Analysis Attacks. Springer.
- Werner Koch (13 December 2018). "Smart cards". gnupg-users (Mailing list). Retrieved 13 December 2018.
- "Watch out for card clash". Transport for London. Mayor of London. Retrieved 18 July 2014.
|Wikimedia Commons has media related to Smart cards.|