HOTOL, for Horizontal Take-Off and Landing, was a 1980s British design for a single-stage-to-orbit (SSTO) spaceplane that was to be powered by an airbreathing jet engine. Development was being conducted by a consortium led by Rolls-Royce and British Aerospace (BAe).
Designed as a single-stage-to-orbit (SSTO) reusable winged launch vehicle, HOTOL was to be fitted with a unique air-breathing engine, the RB545 or Swallow, that was under development by British engine manufacturer Rolls-Royce. The propellant for the engine technically consisted of a combination of liquid hydrogen/liquid oxygen; however, it was to employ a new means of dramatically reducing the amount of oxidizer needed to be carried on board by utilising atmospheric oxygen as the spacecraft climbed through the lower atmosphere. Since the oxidizer typically represents the majority of the takeoff weight of a rocket, HOTOL was to be considerably smaller than normal pure-rocket designs, roughly the size of a medium-haul airliner such as the McDonnell Douglas DC-9/MD-80.
While HOTOL's proof-of-concept design study was being carried out, attempts were made by both industry and the British government to establish international cooperation to develop, produce, and deploy the spacecraft. In spite of American interest in the programme, there was little appetite amongst the members of the European Space Agency (ESA), and the British government was not prepared to depart from ESA cooperation. Additionally, technical issues were encountered, and there were allegations that comparisons with alternative launch systems such as conventional rocket vehicle using similar construction techniques failed to show much advantage to HOTOL. In 1989, funding for the project ended. The termination of development work on HOTOL led to the formation of Reaction Engines Limited (REL) to develop and produce Skylon, a proposed spacecraft based on HOTOL technologies, including its air-breathing engine.
The ideas behind HOTOL originated from work done by British Engineer Alan Bond in the field of pre-cooled jet engines. Bond had specifically performed this research with the intention of producing a viable engine for powering a space launch system. In 1982, British Aerospace (BAe), which was Europe's principal satellite-builder, began studying a prospective new launch system with the aim of providing launch costs that were 20 per cent of the American Space Shuttle operated by NASA. BAe became aware of work by British engine manufacturer Rolls-Royce on a suitable engine, and soon conceived of an unmanned, fully reusable single-stage-to-orbit (SSTO) winged spaceplane as a launch vehicle.
Thus, the project had soon become a joint venture between BAe and Rolls-Royce, led by John Scott-Scott and Dr Bob Parkinson. Early on, there was an ambition to 'Europeanise' the project and to involve other nations in its development and manufacture as it was recognised that an estimated £4 billion would be needed to fund full-scale development. In August 1984, BAe unveiled a public display of the HOTOL satellite launcher project and released details on its proposed operations.
In December 1984, a Department of Trade and Industry (DTI) memorandum noted that West Germany was interested in the programme, while France had adopted a critical attitude towards HOTOL, which the ministry viewed as potentially due to it being seen as a competitor to French-led projects. According to the Minister of Trade and Industry Geoffrey Pattie, French diplomatic pressure to gather support for its own proposed Hermes space vehicle had inadvertently generated support and interest amongst European Space Agency (ESA) members in the HOTOL project. Despite this climate of tentative interest and possible European support, there was a general attitude of reluctance within the British government to take the lead on a new space launcher.
American interest and design studyEdit
In March 1985, there were claims that Rolls-Royce was in the process of conducting licensing talks for HOTOL engine technology with American propulsion company Rocketdyne. In April 1985, Pattie wrote to Secretary of State for Defence Michael Heseltine to propose a two-year £3 million proof of concept study be performed under a public-private partnership arrangement, consisting of £1 million provided by the UK government and the remainder being financed by Rolls-Royce and BAe themselves. Pattie reasoned that the project would serve Britain's "strategic capability, and that tests of key technologies could foster international collaboration. According to aerospace publication Flight International, the support of the Ministry of Defense (MoD) was critical as the design of HOTOL's engine had been classified.
In July 1985, Rolls-Royce's technical director Gordon Lewis stated that the firm sought the involvement of the Royal Aircraft Establishment's (RAE) propulsion group, and that Rolls-Royce was not prepared to invest its own funds into engine development for HOTOL. By the second half of 1985, work had commenced on the two-year concept-of-proof study. Early on, there was considerable pressure to demonstrate the project's feasibility and credibility in advance of final decisions being taken by ESA on the Hermes and what would become the Ariane 5 launch system, thus the work concentrated on the validation of critical technologies involved.
By November 1985, DTI and RAE discussions noted that Rolls-Royce were seeking American data on ramjet technology to support their work on the engine, which it referred to by the name Swallow. Reportedly, the United States Air Force were interested in the technology used in the Swallow engine for its own purposes. In November 1985, discussions between Prime Minister Margaret Thatcher, Minister without portfolio David Young and US President Ronald Reagan's scientific advisor George Keyworth noted American interest in collaboration on developing hypersonic vehicles such as HOTOL, and that a prototype could be flying as early as 1990.
According to British government files, neither BAe nor the MoD were enthusiastic for the prospects of American involvement in the programme, expressing reluctance out of a belief that the outcome of such a move could result in the UK becoming a junior member in a project that it once led. There was also a belief that if Britain chose to pair up with the United States, it would find itself frozen out of work on future European launchers. However, Rolls-Royce viewed transatlantic cooperation as necessary. BAe's head of future business, Peter Conchie, stated that, if possible, HOTOL should become a part of the European space framework. In early 1986, the British government formally approved the two-year study.
Problems and criticismEdit
In December 1984, project management consultant David Andrews issued an eight-page critique of the programme, noting that the design was optimised for the ascent while exposing itself to extended thermal loads during descent due to a low level of drag. He also claimed that the vehicle offered no capability that was not already available; BAe responded that the criticisms made had been answered. In April 1985, the Ministry of Defence's research and development department deputy controller James Barnes claimed that HOTOL lacked a justification, and that there was no defence requirement for such vehicles. He also noted that the "engineering problems are considerable" and that it was unlikely to enter service until the 2020s; Barnes also observed the HOTOL engine to be "ingenious".
In November 1985, the RAE issued an assessment of HOTOL's study proposal; the organisation believed that HOTOL would take up to 20 years to develop, rather than the 12-year timetable that had been envisioned by industry. The RAE also projected that the project would have an estimated total cost of £5 billion (as of its value in 1985), £750 million of which would be required in a six-year definition phase and an estimated £25 million in a pre-definition feasibility study.
During development, it was found that the comparatively heavy rear-mounted engine moved the centre of mass of the vehicle rearwards. This meant that the vehicle had to be designed to push the centre of drag as far rearward as possible to ensure stability during the entire flight regime. Redesign of the vehicle to do this required a large mass of hydraulic systems, which cost a significant proportion of the payload, and made the economics unclear. In particular, some of the analysis seemed to indicate that similar technology applied to a pure rocket approach would give approximately the same performance at less cost.
By 1989, the outlook for HOTOL had become bleak; from the onset of the project, support between the British government and industrial partners had been uneven, while the United States had emerged as the only foreign nation that showed willingness to contribute to the programme, in part because of the secrecy surrounding it. There was little prospect for European involvement, ESA having elected to pursue development of what would become the Ariane 5, a conventional space launch system. Rolls-Royce withdrew from the project, judging the eventual market for the engine was unlikely to be large enough to repay the development costs. The British government declined to offer further funding for HOTOL. The project was almost at the end of its design phase while much of the plans remained in a speculative state; the craft was reportedly still dogged with aerodynamic problems and operational disadvantages at this point.
A cheaper redesign, Interim HOTOL or HOTOL 2, which was to be launched from the back of a modified Antonov An-225 transport aircraft, specifically was promoted by BAe in 1991; however, this proposal was rejected as well. The design for Interim HOTOL was to have dispensed with an air-breathing engine cycle and was designed to use a more conventional mix of LOX and liquid hydrogen as fuel instead.
In 1989, HOTOL co-creator Alan Bond and engineers John Scott-Scott and Richard Varvill formed Reaction Engines Limited (REL) which has since been working on a new air-breathing engine, SABRE, which used alternative designs to work around (and improve upon) the Rolls-Royce patents, and the Skylon vehicle intended to solve the problems of HOTOL. They first published these engine and spacecraft concepts in 1993, and have since been developing the core technologies, particularly the engine and its frost-controlled pre-cooler; initially supported by private funding, but latterly with support from the European Space Agency, the British National Space Centre, the United Kingdom Space Agency, BAe, and the Air Force Research Laboratory. As of 2017[update] REL plan to demonstrate a flight-ready pre-cooler operating under simulated flight conditions in 2018, and statically test a demonstration engine core in 2020.
HOTOL was envisioned as an unmanned, fully reusable single-stage-to-orbit (SSTO) winged spaceplane. The unmanned craft was intended to put a payload of around 7 to 8 tonnes in orbit, at 300 km altitude. It was intended to take off from a runway, mounted on the back of a large rocket-boosted trolley that would help get the craft up to "working speed". The engine was intended to switch from jet propulsion to pure rocket propulsion at 26–32 km high, by which time the craft would be travelling at Mach 5 to 7. After reaching low Earth orbit (LEO), HOTOL was intended to re-enter the atmosphere and glide down to land on a conventional runway (approx 1,500 metres minimum). Only a single payload would have been carried at a time as BAe had judged this to be more economic as it removed any need for satellite interfacing and allowed for missions to be tailored to individual requirements.
During its high-altitude phase, its flight control system would have been linked to ground stations and to space-based global navigation system navigation, while radar would have been used during the take-off and landing phases. In addition to the placing of satellites into geosynchronous orbit or LOE, HOTOL was also projected as being able to also perform the retrieval of satellites and hardware from LOE. BAe promotional material depicts HOTOL docking with the International Space Station (ISS), a feat that the company claimed would have required manned operation as automated systems were not capable of performing such docking manoeuvres at that time. HOTOL was designed to conduct fully automated unmanned flights; however, it had been intended at a later stage to potentially re-introduce a pilot. Manned operations would have required the installation of a dedicated pressurised module within the payload bay.
As designed, HOTOL would have been 62 metres long, 12.8 metres high, a fuselage diameter of 5.7 metres and a wingspan of 19.7 metres. It featured a wing design that had been derived from that of Concorde; its large area resulted in relatively low wing loading, which would have resulted in lower reentry temperatures (never rising above 1,400 °C). Built out of carbon composite materials, there would have been no need for the use of insulating tiles akin to those that comprised the Space Shuttle thermal protection system. The internally stowed landing gear would have been too small to carry the weight of the fully fuelled rocket, so emergency landings would have required the fuel to be dumped.
|Country of origin||United Kingdom|
|Propellant||air and liquid oxygen / liquid hydrogen|
|Cycle||Combined cycle precooled jet engine and closed cycle rocket engine|
|Thrust, vacuum||Approx. 735 kN (165,000 lbf)|
|Thrust, sea-level||Approx. 340 kN (76,000 lbf)|
|Thrust-to-weight ratio||Up to 14 (atmospheric)|
|Specific impulse, vacuum||4,500 N‑s/kg (460 s)|
|Specific impulse, sea-level||14,780 N‑s/kg (1,507 s)|
|Dry weight||2,500 kilograms (5,500 lb) (excluding intake and spill)|
The RB545, which was given the name "Swallow" by its manufacturer, British engine maker Rolls-Royce, was an air-breathing rocket engine. It would have functioned as an integrated dual-role powerplant, having been capable of air-breathing while operating within the atmosphere and operating in a similar manner to that of a rocket when having attained close to and within LEO. This engine would have also been capable of powering the spacecraft to hypersonic speeds. It was a crucial element of the programme, having been publicly attributed as "the heart of Hotol's very low launch costs".
The exact details of this engine were covered by the Official Secrets Act of the United Kingdom; consequently, there is relatively little public information about its development and on its operation. However, material was later declassified when government policy changed to prevent the keeping of secret patents without an attributed justification.
Within the atmosphere, air is taken in through two vertically mounted intake ramps, then the flow would be split, passing the correct amount to the pre-coolers, and the excess to spill ducts. Hydrogen from the fuel tanks would be passed through two heat exchangers to pre-cool the air prior to entering a high overall pressure-ratio turbojet-like engine cycle — the heated hydrogen driving a turbine to compress and feed the cooled air into the rocket engine, where it was combusted with some of the hydrogen used to cool the air. The majority of the remaining hot hydrogen was released from the back of the engine, with a small amount drawn off to reheat the air in the spill ducts in a ramjet arrangement to produce "negative intake momentum drag."[a]
To prevent the pre-coolers from icing up, the first pre-cooler cooled the air to around 10 degrees above freezing point, to liquefy the water vapour in the air. Then liquid oxygen (LOX) would have been injected into the airflow to drop the temperature to −50 °C (−58 °F) flash freezing the water into microscopic ice crystals, sufficiently cold that they wouldn't melt due to kinetic heating if they struck the second pre-cooler elements. A water trap could have been added after the first pre-cooler if operating conditions resulted in an excess of moisture.
When it was no longer possible to use the atmosphere for combustion, the RB545 would switch to using on-board LOX to burn with the hydrogen as a high-efficiency hydrogen/oxygen rocket.
- NASP – a scramjet vehicle with which HOTOL would have competed
- Reaction Engines Skylon – a follow-on design that attempts to avoid HOTOL's shortcomings
- Reaction Engines A2 – a design for a hypersonic antipodal airliner
- Liquid air cycle engine – a related engine cycle that liquifies the air
- ^ BBC Four: The Three Rocketeers. BBC. Retrieved 14 September 2012.
- ^ a b c d e f g h i Moxon 1986, p. 38.
- ^ a b c d e f g h i j k l m n o p q r s t Coppinger, Rob (23 February 2009). "Secret files reveal US interest in UK HOTOL spaceplane". Flight International.
- ^ "Oral history of British science". British Library. 8 November 2010. Retrieved 19 July 2016.
- ^ a b c d Hempsell, Mark (May 1993). "HOTOL's Secret Engines Revealed". Spaceflight. Vol. 35, no. 5. London: British Interplanetary Society. pp. 168–172. ISSN 0038-6340.
- ^ PARKINSON, R. (17 August 1991). "The An-225/Interim Hotol launch vehicle". 3rd International Aerospace Planes Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics. doi:10.2514/6.1991-5006.
- ^ Varvill, Richard; Bond, Alan (May 1993). "SKYLON: a Key Element of a Future Space Transportation System". Spaceflight. Vol. 35, no. 5. London: British Interplanetary Society. pp. 162–166. ISSN 0038-6340.
- ^ Norris, Guy (1 November 2015). "BAE Takes Stake In Reaction Engines Hypersonic Development". aviationweek.com. Aviation Week & Space Technology. Retrieved 1 November 2015.
- ^ a b c d e f g h i Moxon 1986, p. 40.
- ^ Moxon 1986, pp. 38, 40.
- ^ Dr Bob Parkinson discusses HOTOL in an oral history interview recorded for the National Life Stories project Oral History of British Science at the British Library
- ^ GB patent 2241537, John Scott-Scott; Bryan Belcher & Alan Bond, "Prevention of icing in the intakes of aerospace propulsors", published 4 September 1991, issued 12 August 1992, assigned to Rolls-Royce Plc
- Moxon, Julian (1 March 1986), "Hotol: where next?", Flight International, Business Press International, vol. 129, no. 4000, pp. 38–40, ISSN 0015-3710, archived from the original on 22 October 2012 – via FlightGlobal Archive
- Postlethwaite, Alan (25 March 1989), "Hotol fights for life", Flight International, vol. 135, p. 34, Bibcode:1989FlInt.135...34P, archived from the original on 3 December 2013 (With detailed cutaway)
- ^ Due to the split in responsibilities of the HOTOL project, Rolls-Royce were responsible for the engine, and BAe were responsible for the aerodynamics. When BAe wanted to add the ramjet it couldn't provide thrust, because that was the responsibility of the engine, so instead it was a mechanism for reducing drag
- Cutaway drawing of the HOTOL at the Wayback Machine (archived 30 January 2013)
- HOTOL-related patent on jetisonable control surfaces
- Listen to Dr Bob Parkinson discuss the HOTOL in an oral history interview recorded for the National Life Stories project Oral History of British Science at the British Library