This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (July 2015) (Learn how and when to remove this template message)
A B unit, in railroad terminology, is a locomotive unit (generally a diesel locomotive) which does not have a driving cab or crew compartment, and must therefore be controlled from another, coupled locomotive with a driving cab (an A unit). The terms booster unit and cabless are also used. The concept is largely confined to North America. Elsewhere, locomotives without driving cabs are rare.
Some B units cannot be moved without a controlling unit attached, but most have some simple controls inside, and often a side window at that control station. For example, B unit versions of the EMD FT with conventional couplers had a fifth porthole-style window added on the right side only for the control station. Other models used existing windows. These controls enable a hostler to move the B-unit locomotive by itself in a yard or shops. (A hostler is an employee permitted to move locomotives within the confines of a yard or shops complex, but not on the main railroad.) B units without controls are generally semi-permanently coupled to controlling units. Sometimes, there is a terminology distinction between the types: a booster is a B unit with hostler controls, and a slave is a B unit without hostler controls.
Reasons for useEdit
The reasons railroads ordered B units included the fact that a B unit was slightly cheaper. With no driving cab, B units lack windshields, crew seats, radios, heating, and air conditioning. There would also be no toilets, which were usually found in the short hood of an A unit. Additionally, at first, railroads bought multiple-unit diesel locomotives as one-for-one replacements for steam locomotives; as a result, railroads could not take advantage of the flexibility afforded by interchangeable units, which could be assembled into any required power output. When a three- or four-unit locomotive was considered an indivisible unit, there was no point in the intermediate units having cabs. Finally, B units gave a smoother line to the train for passenger service.
The B unit eraEdit
B units were commonly built in the cab unit days in the 1930s, 1940s, 1950s and 1960s. When hood unit road switchers became the common kind of diesel locomotive, some B units were built, but many railroads soon came to the opinion that the lower cost of a B unit did not offset the lack of operational flexibility. Few B units have been built in the last 40 years. Railroads that kept ordering B units longer than most were largely Western roads, including the Southern Pacific, Union Pacific, Burlington Northern, and the Santa Fe. Santa Fe ordered the GP60B model in 1991, which were the final B units built for road service in North America as of 2005.
In some cases, a B unit is converted from an already existing A unit. The cab is either removed or has its windows blanked out (such as on CSX GE BQ23-7 units), and all non-essential equipment is removed. The degree to which this equipment is removed depends on the railroad, but may (and usually) include the removal of the speedometer, event recorder, horn, headlights, toilet, and cab heaters. This conversion was sometimes performed when the A unit had been in a collision and rebuilding the cab was not cost-effective. In some rare instances, B units were converted to incorporate a cab, such as on the Chicago & North Western Railway in the 1970s with some EMD E8B units bought from the Union Pacific. The homebuilt cabs were referred to as "Crandall Cabs." Also, the Santa Fe rebuilt four of its five GP7Bs to GP9us with cabs. In the Illinois Central Gulf's GP11 rebuild program, some of the engines used were ex-UP GP9Bs, and in their SD20 program, some ex-UP SD24Bs were also used. BNSF converted a former ATSF GP60B #370 into a cab unit and was renumbered to #170 in 2010.
In rare instances, a B unit will run at the front of a train. This is avoided because it limits visibility from the locomotive cab, but locomotive orientation and operational requirements may dictate the B-unit running first. See this photo of a SD40-2/SD45-2B, a GP30/GP30B and GP35/GP9B for examples.
List of B unit locomotive modelsEdit
These are all known B unit models, with discrepancies settled by the later (Marre) reference. At least one of each model was manufactured. All units below contain one or more engines and traction motors, so slugs and snails are not listed. Cow-calf units are also not listed, since these were considered a single locomotive. The New York City Revenue cars 66 and 67 were R8A units which were B units also.
- ALCO/MLW - Black Maria Booster, DL-108, DL-110, FB-1, FB-2, FPB-2, FPB-4, PB-1, PB-2, C855B, M420B
- Baldwin - AS-616B, DRS-6-6-1500B, DR-4-4-15B, RF-16B, DR-6-4-15B, DR-6-4-20B
- EMD E units - EB, E1B, E2B, E3B, E4B, E5B, E6B, E7B, E8B, E9B
- EMD F-units - FTB, F2B, F3B, F7B, F9B
- EMD Hood units – DD35, GP7B, GP9B, GP30B, GP60B, SD24B
- Fairbanks-Morse - B Erie, CFB-16-4, CFB-20-4, CPB-16-4, CPB-16-5
- GE Transportation Systems - UM20B booster, B30-7A
- EMD Hood units - GP38-2B (by BN), SD40B (by BN), SD40-2B (by BN), SD45B (by ATSF), SD45-2B (by ATSF)
- GE Transportation Systems - U30CB (by BN; MP also operated a cabless U30C but did not give it this designation), B36-7 (B) (by SSW)
TE10 locomotives have A-B-A or A-B-B-A unit configurations, which called 3TE10M, and 4TE10S respectively. B-unit of 3TE10 have reduced set of driving controls, intended for service movement of the locomotive. The last 3-unit TE10 rebuild called 3TE10MK, equipped with computer-aided cab controls. Most of these locomotives work on BAM rail line, located on Russian Far East.
- Pacific National XRB class
- CM40-8ML - cabless version of C40-8 built on C636 frames for BHP. See https://web.archive.org/web/20110822060528/http://www.pilbararailways.com.au/bhp/loco/dash8/dash8.htm and https://web.archive.org/web/20120308172108/http://www.pilbararailways.com.au/bhp/loco/bhpb-roster.html