An airbag is a vehicle occupant-restraint system using a bag designed to inflate extremely quickly, then quickly deflate during a collision. It consists of the airbag cushion, a flexible fabric bag, an inflation module, and an impact sensor. The purpose of the airbag is to provide a vehicle occupant a soft cushioning and restraint during a crash event. It can reduce injuries between the flailing occupant and the interior of the vehicle.
The airbag provides an energy-absorbing surface between the vehicle's occupants and a steering wheel, instrument panel, body pillar, headliner, and windshield. Modern vehicles may contain up to 10 airbag modules in various configurations, including: driver, passenger, side-curtain, seat-mounted, door-mounted, B and C-pillar mounted side-impact, knee bolster, inflatable seat belt, and pedestrian airbag modules.
During a crash, the vehicle's crash sensors provide crucial information to the airbag electronic controller unit (ECU), including collision type, angle, and severity of impact. Using this information, the airbag ECU's crash algorithm determines if the crash event meets the criteria for deployment and triggers various firing circuits to deploy one or more airbag modules within the vehicle. Working as a supplemental restraint system to the vehicle's seat-belt systems, airbag module deployments are triggered through a pyrotechnic process that is designed to be used once. Newer side-impact airbag modules consist of compressed-air cylinders that are triggered in the event of a side-on vehicle impact.
The first commercial designs were introduced in passenger automobiles during the 1970s, with limited success, and actually caused some fatalities. Broad commercial adoption of airbags occurred in many markets during the late 1980s and early 1990s with a driver airbag, and a front-passenger airbag, as well, on some cars, and many modern vehicles now include six or more units.
- 1 Active vs. passive safety
- 2 History
- 2.1 Origins
- 2.2 As a substitute to seat belts
- 2.3 As a supplemental restraint system
- 2.4 On motorcycles
- 3 Operation
- 4 Regulatory specifications
- 5 Maintenance
- 6 Limitations
- 7 Injuries and fatalities
- 8 Aerospace and military applications
- 9 See also
- 10 References
- 11 External links
Active vs. passive safetyEdit
Airbags are considered as "passive" restraints and act as a supplement to "active" restraints. Because no action by a vehicle occupant is required to activate or use the airbag, it is considered a "passive" device. This is in contrast to seat belts, which are considered "active" devices because the vehicle occupant must act to enable them.
This terminology is not related to active and passive safety, which are, respectively, systems designed to prevent accidents in the first place, and systems designed to minimize the effects of accidents once they occur. In this use, a car antilock braking system qualifies as an active-safety device, while both its seatbelts and airbags qualify as passive-safety devices. Further terminological confusion can arise from the fact that passive devices and systems—those requiring no input or action by the vehicle occupant—can operate independently in an active manner; an airbag is one such device. Vehicle safety professionals are generally careful in their use of language to avoid this sort of confusion, though advertising principles sometimes prevent such semantic caution in the consumer marketing of safety features. Further confusing the terminology, the aviation safety community uses the terms "active" and "passive" in the opposite sense from the automotive industry.
The airbag "for the covering of aeroplane and other vehicle parts" traces its origins to a United States patent submitted in 1919 by two dentists, Harold Round & Arthur Parrott of Birmingham, England and approved in 1920. Air-filled bladders were in use as early as 1951. The airbag specifically for automobile use is credited independently to the American John W. Hetrick, who filed for an airbag patent on 5 August 1952, that was granted #2,649,311 by the United States Patent Office on 18 August 1953. German engineer Walter Linderer, who filed German patent #896,312 on 6 October 1951, was issued on 12 November 1953, approximately three months after American John Hetrick. Hetrick and Linderer's airbags were both based on a compressed air system, either released by spring, bumper contact, or by the driver. Later research during the 1960s showed that compressed air could not inflate the mechanical airbags fast enough to ensure maximum safety, leading to the current chemical and electrical airbags. In patent applications, manufacturers sometimes use the term "inflatable occupant restraint systems".
Hetrick was an industrial engineer and member of the United States Navy. His airbag design, however, only came about when he combined his experiences working with navy torpedoes with his desire to protect his family on the road. Sadly, despite working with the major automobile manufacturers of his time, no company invested in Hetrick's idea. Although airbags are now required in every automobile sold in the United States, Hetrick's 1951 patent filing serves as an example of a "valuable" invention with little economic value to its inventor. Its first commercial use was not implemented until after the patent expired in 1971, at which point the airbag was installed in a few experimental Ford cars.
In 1964, a Japanese automobile engineer, Yasuzaburou Kobori (小堀保三郎), started developing an airbag "safety net" system. His design harnessed an explosive to inflate an airbag, for which he was later awarded patents in 14 countries. He died in 1975, before seeing widespread adoption of airbag systems.
In 1967, a breakthrough in the development of airbag crash sensors came when Allen K. Breed invented a ball-in-tube mechanism for crash detection. Under his system, a electromechanical sensor with a steel ball attached to a tube by a magnet would inflate an airbag in under 30 milliseconds. A small explosion of sodium azide was used instead of compressed air during inflation for the first time. Breed Corporation then marketed this innovation to Chrysler. A similar "Auto-Ceptor" crash-restraint, developed by the Eaton, Yale & Towne company for Ford, was soon also offered as an automatic safety system in the United States, while the Italian Eaton-Livia company offered a variant with localized[further explanation needed] air cushions.
In the early 1970s, General Motors began offering cars equipped with airbags, initially in government fleet-purchased, metallic green 1973 Chevrolet Impala sedans. These Chevys all had a 1974-style Oldsmobile instrument panel, and a special steering wheel that contained the driver-side air bag. Only one car from this original batch survives. GM's Oldsmobile Toronado was the first domestic U.S. vehicle to include a passenger airbag.[when?] General Motors marketed its first airbag modules under the "Air Cushion Restraint System" name, or ACRS. The automaker discontinued the option for its 1977 model year, citing lack of consumer interest. Ford and GM then spent years lobbying against air-bag requirements, claiming that the devices were unfeasible and inappropriate. Chrysler made driver-side airbags standard on 1988–1989 models, but airbags did not become widespread in American cars until the early 1990s.
As a substitute to seat beltsEdit
Airbags for passenger cars were introduced in the United States in the mid-1970s, when seat-belt usage rates in the country were quite low compared to modern day. Ford built an experimental fleet of cars with airbags in 1971, followed by General Motors in 1973 (using Chevrolet vehicles). The early fleet of experimental GM vehicles equipped with airbags experienced seven fatalities, one of which was later suspected to have been caused by the airbag.
In 1974, GM made its ACRS system (which consisted of a padded lower dashboard and a passenger-side air bag) available as a regular production option (RPO code AR3) in full-sized Cadillacs. Buick and Oldsmobile models. The GM cars from the 1970s equipped with ACRS had a driver-side airbag, a driver-side knee restraint,. The passenger-side airbag protected both front passengers, and unlike most modern systems, integrated a knee and torso cushion while also having a dual-stage deployment dictated by force of the impact. The cars equipped with ACRS had lap belts for all seating positions, but lacked shoulder belts. Shoulder belts were already mandatory in the United States on closed cars without airbags for the driver and outer front passenger, but GM chose to market its airbags as a substitute for shoulder belts. Prices for this option on Cadillac models were US$225 in 1974, $300 in 1975, and $340 in 1976 ($1125, $1360, and $1465, respectively, in 2017 dollars).
The early development of airbags coincided with an international interest in automobile safety legislation. Some safety experts advocated a performance-based occupant-protection standard rather than one mandating a particular technical solution (which could rapidly become outdated and prove to not be a cost-effective approach). Less emphasis was placed on other designs as countries successfully mandated seatbelt restrictions, however.
As a supplemental restraint systemEdit
The auto industry and research and regulatory communities have moved away from their initial view of the airbag as a seat-belt replacement, and the bags are now nominally designated as supplemental restraint systems (SRS) or supplemental inflatable restraints.
In 1981, Mercedes-Benz introduced the airbag in West Germany as an option on its flagship saloon model, S-Class (W126). In the Mercedes system, the sensors automatically tensioned the seat belts to reduce occupants' motion on impact (now a common feature), and then deployed the airbag on impact. This integrated the seat belts and airbag into a restraint system, rather than the airbag being considered an alternative to the seat belt.
In 1987, the Porsche 944 Turbo became the first car to have driver and passenger airbags as standard equipment. The less powerful Porsche 944 and 944S had this as an available option. The same year also had the first airbag in a Japanese car, the Honda Legend.
In 1988, Chrysler became the first United States automaker to fit a driver-side airbag as standard equipment, which was offered in six different models. The following year, Chrysler became the first US auto manufacturer to offer driver-side airbags in [clarification needed] All versions of the Chrysler minivans came with airbags starting for the 1991 model year. The 1993 Jeep Grand Cherokee became the first SUV to offer a driver-side airbag when it was launched in 1992. Driver and passenger airbags became standard equipment in all Dodge Intrepid, Eagle Vision, and Chrysler Concorde sedans ahead of any regulations.[failed verification] Early 1993 saw the 4-millionth airbag-equipped Chrysler vehicle roll off the assembly line. In October 1993, the Dodge Ram became the first pickup truck with a standard driver-side airbag.
The first known accident between two airbag-equipped automobiles took place on 12 March 1990 in Virginia, USA. A 1989 Chrysler LeBaron crossed the center line and hit another 1989 Chrysler LeBaron in a head-on collision, causing both driver airbags to deploy. The drivers suffered only minor injuries despite extensive damage to the vehicles.
The United States Intermodal Surface Transportation Efficiency Act of 1991 required passenger cars and light trucks built after 1 September 1998 to have airbags for the driver and the right front passenger. In the United States, NHTSA estimated that airbags had saved over 4,600 lives by 1 September 1999; however, the crash deployment experience of the early 1990s installations indicated that some fatalities and serious injuries were in fact caused by airbags. In 1998, NHTSA initiated new rules for advanced airbags that gave automakers more flexibility in devising effective technological solutions. The revised rules also required improved protection for occupants of different sizes regardless of whether they use seat belts, while minimizing the risk to infants, children, and other occupants caused by airbags.
In Europe, airbags were almost unheard of until the early 1990s. By 1991, four manufacturers – BMW, Honda, Mercedes-Benz, and Volvo – offered the airbag on some of their higher-end models, but shortly afterwards, airbags became a common feature on more mainstream cars, with Ford and Vauxhall/Opel being among the manufacturers to introduce the airbag to its model ranges in 1992. Citroen, Fiat, Nissan, Peugeot, Renault, and Volkswagen followed shortly afterwards.
By 1999, finding a new mass market car without an airbag at least as optional equipment was difficult, and some late 1990s products, such as the Volkswagen Golf Mk4, also featured side airbags. The Peugeot 306 is one example of the European automotive mass-market evolution: starting in early 1993, most of these models did not even offer a driver's airbag as an option, but by 1999, even side airbags were available on several variants. Audi was late to offer airbag systems on a broader scale, since even in the 1994 model year, its popular models did not offer airbags. Instead, the German automaker until then relied solely on its proprietary cable-based procon-ten restraint system.
From around 2000, side-impact airbags became commonplace on even low- to mid-range vehicles, such as the smaller-engined versions of the Ford Fiesta and Peugeot 206, and curtain airbags were also becoming regular features on mass-market cars. The Toyota Avensis, launched in 2003, was the first mass-market car to be sold in Europe with nine airbags.
Variable force-deployment front airbags were developed to help minimize injury from the airbag itself.
The emergence of the airbag has contributed to a sharp decline in the number of deaths and serious injuries on the roads of Europe since 1990, and by 2010, the number of cars on European roads lacking an airbag represented a very small percentage of cars, mostly the remaining cars dating from the mid-1990s or earlier.
Many new cars in Latin America, including the Kia Picanto, Kia Rio, Hyundai Accent and Suzuki Alto, are still regularly sold without Airbags, as neither Airbags nor Automatic braking systems in new cars are compulsory in Latin America.
Shape of airbagsEdit
Essentially, two types of side airbags are commonly used today - the side-torso airbag and the side-curtain airbag.
Most vehicles equipped with side-curtain airbags also include side-torso airbags. However, some, such as the Chevrolet Cobalt, 2007–09 model Chevrolet Silverado/GMC Sierra, and 2009–12 Dodge Ram do not feature the side-torso airbag.
Side torso airbagEdit
Side-impact airbags or side-torso airbags are a category of airbags usually located in the seat or door panel, and inflate between the seat occupant and the door. These airbags are designed to reduce the risk of injury to the pelvic and lower abdomen regions. Most vehicles are now being equipped with different types of designs, to help reduce injury and ejection from the vehicle in rollover crashes. More recent side-airbag designs include a two chamber system; a firmer lower chamber for the pelvic region and softer upper chamber for the ribcage.
Swedish company Autoliv AB was granted a patent on side-impact airbags, and they were first offered as an option in 1994 on the 1995 Volvo 850, and as standard equipment on all Volvo cars made after 1995.
Some cars, such as the 2010 Volkswagen Polo Mk.5 have combined head- and torso-side airbags. These are fitted in the backrest of the front seats, and protect the head and the torso.
Side tubular or curtain airbagEdit
In 1997, the BMW 7 Series and smaller 5 Series were fitted with tubular-shaped head side airbags (inflatable tubular structure), the "Head Protection System (HPS)" as standard equipment. This airbag was designed to offer head protection in side impact collisions and also maintained inflation for up to seven seconds for rollover protection. However, this tubular-shaped airbag design has been quickly replaced by an inflatable 'curtain' airbag.
In May 1998, Toyota began offering a side-curtain airbag deploying from the roof on the Progrés. In 1998, the Volvo S80 was given roof-mounted curtain airbags to protect both front and rear passengers. Curtain airbags were then made standard equipment on all new Volvo cars from 2000 except for the first-generation C70, which received an enlarged side-torso airbag that also protects the head of front-seat occupants. The second-generation C70 convertible received the world's first door-mounted, side-curtain airbags that deployed upwards.
Roll-sensing side-curtain airbags found on vehicles more prone to rollovers such as SUVs and pickups deploy when a rollover is detected instead of just when an actual collision takes place. Often, a switch can disable the feature in case the driver wants to take the vehicle off road.
Curtain airbags have been said to reduce brain injury or fatalities by up to 45% in a side impact with an SUV. These airbags come in various forms (e.g., tubular, curtain, door-mounted) depending on the needs of the application. Many recent SUVs and MPVs have a long inflatable curtain airbag that protects all three rows of seats.
The second driver-side and separate knee airbag was used in the Kia Sportage (a Korean SUV launched in 1995) and has been standard equipment since then. The airbag is located beneath the steering wheel.
The Toyota Caldina introduced the first driver-side SRS knee airbag on the Japanese market in 2002. Toyota Avensis became the first vehicle sold in Europe equipped with a driver's knee airbag. The EuroNCAP reported on the 2003 Avensis, "There has been much effort to protect the driver's knees and legs and a knee airbag worked well." Since then certain models have also included front-passenger knee airbags, which deploy near or over the glove compartment in a crash. Knee airbags are designed to reduce leg injury. The knee airbag has become increasingly common from 2000.
Rear curtain airbagEdit
Seat cushion airbagEdit
Another feature of the Toyota iQ was a seat-cushion airbag in the passenger seat to prevent the pelvis from diving below the lap belt during a frontal impact or submarining. Later Toyota models such as the Yaris added the feature to the driver's seat, as well.
This section needs to be updated.February 2019)(
In 2009, Toyota developed the first production rear-seat center airbag designed to reduce the severity of secondary injuries to rear passengers in a side collision. This system deploys from the rear center seat first appearing in on the redesigned Crown Majesta. In late 2012, General Motors with supplier Takata introduced a front center airbag; it deploys from the driver's seat.
The seat-belt airbag is designed to better distribute the forces experienced by a buckled person in a crash by means of increased seat belt area. This is done to reduce possible injuries to the rib cage or chest of the belt wearer.
- 2010: Ford Explorer and 2013 Ford Flex: optional rear seat belt airbags; standard on the 2013 Lincoln MKT
- 2010: Lexus LFA had seat belt airbags for driver and passenger
- 2013: Mercedes-Benz S-Class (W222) has rear seat beltbags
- 2014: Ford Mondeo Mk IV has optional rear seat belt airbags for the two outer seats
Airbag(s) mounted to the exterior of vehicles, so called pedestrian airbags, are designed to reduce injuries in the event of a vehicle to pedestrian collision. When a collision is detected the airbag will deploy and cover hard areas, such as a-pillars and bonnet edges, before they can be struck by the pedestrian. When introduced in 2012 the Volvo V40 included the world's first pedestrian airbag as standard. As a result, the V40 ranked highest (88%) in the EuroNCAP's pedestrian tests. The 2014 Land Rover Discovery was fitted with a pedestrian airbag as well.
Various types of airbags were tested on motorcycles by the UK Transport Research Laboratory in the mid-1970s. In 2006 Honda introduced the first production motorcycle airbag safety system on its Gold Wing motorcycle. Honda claims that sensors in the front forks can detect a severe frontal collision and decide when to deploy the airbag, absorbing some of the forward energy of the rider and reducing the velocity at which the rider may be thrown from the motorcycle.
Airbag suits have also been developed for use by Motorcycle Grand Prix riders. In their earlier form, they were connected to the motorcycle by a cable and deployed when the cable became detached from its mounting clip, inflating to protect the back of the rider. The French manufacturer Helite specializes exclusively in developing airbag jackets for motorcyclists, snowmobile riders and horseback riders. Further developments were conducted by Dainese and led to an autonomous system on board the leathers, without a cable connected to the bike. Instead, an electronic system detects a fall and triggers the inflation of the nitrogen airbags to protect the rider's upper body.
This section needs additional citations for verification. (May 2016) (Learn how and when to remove this template message)
The airbags in the vehicle are controlled by a central airbag control unit (ACU), a specific type of ECU. The ACU monitors a number of related sensors within the vehicle, including accelerometers, impact sensors, side (door) pressure sensors, wheel speed sensors, gyroscopes, brake pressure sensors, and seat occupancy sensors. The bag itself and its inflation mechanism is concealed within the steering wheel boss (for the driver), or the dashboard (for the front passenger), behind plastic flaps or doors which are designed to tear open under the force of the bag inflating. Once the requisite threshold has been reached or exceeded, the airbag control unit will trigger the ignition of a gas generator propellant to rapidly inflate a fabric bag. As the vehicle occupant collides with and squeezes the bag, the gas escapes in a controlled manner through small vent holes. The airbag's volume and the size of the vents in the bag are tailored to each vehicle type, to spread out the deceleration of (and thus force experienced by) the occupant over time and over the occupant's body, compared to a seat belt alone.
The signals from the various sensors are fed into the airbag control unit, which determines from them the angle of impact, the severity, or force of the crash, along with other variables. Depending on the result of these calculations, the ACU may also deploy various additional restraint devices, such as seat belt pre-tensioners, and/or airbags (including frontal bags for driver and front passenger, along with seat-mounted side bags, and "curtain" airbags which cover the side glass). Each restraint device is typically activated with one or more pyrotechnic devices, commonly called an initiator or electric match. The electric match, which consists of an electrical conductor wrapped in a combustible material, activates with a current pulse between 1 and 3 amperes in less than 2 milliseconds. When the conductor becomes hot enough, it ignites the combustible material, which initiates the gas generator. In a seat belt pre-tensioner, this hot gas is used to drive a piston that pulls the slack out of the seat belt. In an airbag, the initiator is used to ignite solid propellant inside the airbag inflator. The burning propellant generates inert gas which rapidly inflates the airbag in approximately 20 to 30 milliseconds. An airbag must inflate quickly in order to be fully inflated by the time the forward-traveling occupant reaches its outer surface. Typically, the decision to deploy an airbag in a frontal crash is made within 15 to 30 milliseconds after the onset of the crash, and both the driver and passenger airbags are fully inflated within approximately 60–80 milliseconds after the first moment of vehicle contact. If an airbag deploys too late or too slowly, the risk of occupant injury from contact with the inflating airbag may increase. Since more distance typically exists between the passenger and the instrument panel, the passenger airbag is larger and requires more gas to fill it.
Older airbag systems contained a mixture of sodium azide (NaN3), KNO3, and SiO2. A typical driver-side airbag contains approximately 50–80 g of NaN3, with the larger passenger-side airbag containing about 250 g. Within about 40 milliseconds of impact, all these components react in three separate reactions that produce nitrogen gas. The reactions, in order, are as follows.
- 2 NaN3 → 2 Na + 3 N2 (g)
- 10 Na + 2 KNO3 → K2O + 5 Na2O + N2 (g)
- K2O + Na2O + 2 SiO2 → K2SiO3 + Na2SiO3
The first two reactions create 4 molar equivalents of nitrogen gas, and the third converts the remaining reactants to relatively inert potassium silicate and sodium silicate. The reason that KNO3 is used rather than something like NaNO3 is because it is less hygroscopic. It is very important that the materials used in this reaction are not hygroscopic because absorbed moisture can de-sensitize the system and cause the reaction to fail.
There are ongoing efforts to find alternative compounds that can be used in airbags which have less toxic reactants. In a journal article by Akiyoshi et al., it was found that for the reaction of the Sr complex nitrate, (Sr(NH2NHCONHNH2)∙(NO3)2) of carbohydrazide (SrCDH) with various oxidizing agents resulted in the evolution of N2 and CO2 gases. Using KBrO3 as the oxidizing agent resulted in the most vigorous reaction as well as the lowest initial temperature of reaction. The N2 and CO2 gases evolved made up 99% of all gases evolved. Nearly all the starting materials won’t decompose until reaching temperatures of 500 °C or higher so this could be a viable option as an air bag gas generator. In a patent containing another plausible alternative to NaN3 driven airbags, the gas generating materials involved the use of guanidine nitrate, 5-aminotetrazole, bitetrazole dihydrate, nitroimidazole, and basic copper nitrate. It was found that these non-azide reagents allowed for a less toxic, lower combustion temperature reaction and more easily disposable air bag inflation system.
Front airbags normally do not protect the occupants during side, rear, or rollover accidents. Since airbags deploy only once and deflate quickly after the initial impact, they will not be beneficial during a subsequent collision. Safety belts help reduce the risk of injury in many types of crashes. They help to properly position occupants to maximize the airbag's benefits and they help restrain occupants during the initial and any following collisions.
In vehicles equipped with a rollover sensing system, accelerometers and gyroscopes are used to sense the onset of a rollover event. If a rollover event is determined to be imminent, side-curtain airbags are deployed to help protect the occupant from contact with the side of the vehicle interior, and also to help prevent occupant ejection as the vehicle rolls over.
Airbags are designed to deploy in frontal and near-frontal collisions more severe than a threshold defined by the regulations governing vehicle construction in whatever particular market the vehicle is intended for: United States regulations require deployment in crashes at least equivalent in deceleration to a 23 km/h (14 mph) barrier collision, or similarly, striking a parked car of similar size across the full front of each vehicle at about twice the speed. International regulations are performance based, rather than technology-based, so airbag deployment threshold is a function of overall vehicle design.
Unlike crash tests into barriers, real-world crashes typically occur at angles other than directly into the front of the vehicle, and the crash forces usually are not evenly distributed across the front of the vehicle. Consequently, the relative speed between a striking and struck vehicle required to deploy the airbag in a real-world crash can be much higher than an equivalent barrier crash. Because airbag sensors measure deceleration, vehicle speed is not a good indicator of whether an airbag should have deployed. Airbags can deploy due to the vehicle's undercarriage striking a low object protruding above the roadway due to the resulting deceleration.
The airbag sensor is a MEMS accelerometer, which is a small integrated circuit with integrated micro mechanical elements. The microscopic mechanical element moves in response to rapid deceleration, and this motion causes a change in capacitance, which is detected by the electronics on the chip that then sends a signal to fire the airbag. The most common MEMS accelerometer in use is the ADXL-50 by Analog Devices, but there are other MEMS manufacturers as well.
Initial attempts using mercury switches did not work well. Before MEMS, the primary system used to deploy airbags was called a "rolamite". A rolamite is a mechanical device, consisting of a roller suspended within a tensioned band. As a result of the particular geometry and material properties used, the roller is free to translate with little friction or hysteresis. This device was developed at Sandia National Laboratories. The rolamite, and similar macro-mechanical devices were used in airbags until the mid-1990s when they were universally replaced with MEMS.
Nearly all airbags are designed to automatically deploy in the event of a vehicle fire when temperatures reach 150–200 °C (300–400 °F). This safety feature, often termed auto-ignition, helps to ensure that such temperatures do not cause an explosion of the entire airbag module.
Today, airbag triggering algorithms are becoming much more complex. They try to reduce unnecessary deployments and to adapt the deployment speed to the crash conditions. The algorithms are considered valuable intellectual property. Experimental algorithms may take into account such factors as the weight of the occupant, the seat location, seatbelt use, and even attempt to determine if a baby seat is present.
This section relies largely or entirely on a single source. (May 2016)
When the frontal airbags are to deploy, a signal is sent to the inflator unit within the airbag control unit. An igniter starts a rapid chemical reaction generating primarily nitrogen gas (N2) to fill the airbag making it deploy through the module cover. Some airbag technologies use compressed nitrogen or argon gas with a pyrotechnic operated valve ("hybrid gas generator"), while other technologies use various energetic propellants. Although propellants containing the highly toxic sodium azide (NaN3) were common in early inflator designs, little to no toxic sodium azide has been found on used airbags.
The azide-containing pyrotechnic gas generators contain a substantial amount of the propellant. The driver-side airbag would contain a canister containing about 50 grams of sodium azide. The passenger side container holds about 200 grams of sodium azide.[better source needed]
The alternative propellants may incorporate, for example, a combination of nitroguanidine, phase-stabilized ammonium nitrate (NH4NO3) or other nonmetallic oxidizer, and a nitrogen-rich fuel different from azide (e.g. tetrazoles, triazoles, and their salts). The burn rate modifiers in the mixture may be an alkaline metal nitrate (NO3-) or nitrite (NO2-), dicyanamide or its salts, sodium borohydride (NaBH4), etc. The coolants and slag formers may be e.g. clay, silica, alumina, glass, etc.[non-primary source needed][original research?] Other alternatives are e.g. nitrocellulose based propellants (which have high gas yield but bad storage stability, and their oxygen balance requires secondary oxidation of the reaction products to avoid buildup of carbon monoxide), or high-oxygen nitrogen-free organic compounds with inorganic oxidizers (e.g., di or tricarboxylic acids with chlorates (ClO3-) or perchlorates (ClO4-) and eventually metallic oxides; the nitrogen-free formulation avoids formation of toxic nitrogen oxides).
From the onset of the crash, the entire deployment and inflation process is about 0.04 seconds. Because vehicles change speed so quickly in a crash, airbags must inflate rapidly to reduce the risk of the occupant hitting the vehicle's interior.
Advanced airbag technologies are being developed to tailor airbag deployment to the severity of the crash, the size and posture of the vehicle occupant, belt usage, and how close that person is to the actual airbag. Many of these systems use multi-stage inflators that deploy less forcefully in stages in moderate crashes than in very severe crashes. Occupant sensing devices let the airbag control unit know if someone is occupying a seat adjacent to an airbag, the mass/weight of the person, whether a seat belt or child restraint is being used, and whether the person is forward in the seat and close to the airbag. Based on this information and crash severity information, the airbag is deployed at either at a high force level, a less forceful level, or not at all.
Adaptive airbag systems may utilize multi-stage airbags to adjust the pressure within the airbag. The greater the pressure within the airbag, the more force the airbag will exert on the occupants as they come in contact with it. These adjustments allow the system to deploy the airbag with a moderate force for most collisions; reserving the maximum force airbag only for the severest of collisions. Additional sensors to determine the location, weight or relative size of the occupants may also be used. Information regarding the occupants and the severity of the crash are used by the airbag control unit, to determine whether airbags should be suppressed or deployed, and if so, at various output levels.
A chemical reaction produces a burst of nitrogen to inflate the bag. Once an airbag deploys, deflation begins immediately as the gas escapes through vent(s) in the fabric (or, as it's sometimes called, the cushion) and cools. Deployment is frequently accompanied by the release of dust-like particles, and gases in the vehicle's interior (called effluent). Most of this dust consists of cornstarch, french chalk, or talcum powder, which are used to lubricate the airbag during deployment.
Newer designs produce effluent primarily consisting of harmless talcum powder/cornstarch and nitrogen gas. In older designs using an azide-based propellant (usually NaN3), varying amounts of sodium hydroxide nearly always are initially present. In small amounts this chemical can cause minor irritation to the eyes and/or open wounds; however, with exposure to air, it quickly turns into sodium bicarbonate (baking soda). However, this transformation is not 100% complete, and invariably leaves residual amounts of hydroxide ion from NaOH. Depending on the type of airbag system, potassium chloride may also be present.
For most people, the only effect the dust may produce is some minor irritation of the throat and eyes. Generally, minor irritations only occur when the occupant remains in the vehicle for many minutes with the windows closed and no ventilation. However, some people with asthma may develop a potentially lethal asthmatic attack from inhaling the dust.
Because of the airbag exit flap design of the steering wheel boss and dashboard panel, these items are not designed to be recoverable if an airbag deploys, meaning that they have to be replaced if the vehicle has not been written off in an accident. Moreover, the dust-like particles and gases can cause irreparable cosmetic damage to the dashboard and upholstery, meaning that minor collisions which result in the deployment of airbags can be costly accidents, even if there are no injuries and there is only minor damage to the vehicle structure.
On 11 July 1984, the United States government amended Federal Motor Vehicle Safety Standard 208 (FMVSS 208) to require cars produced after 1 April 1989 to be equipped with a passive restraint for the driver. An airbag or a seat belt would meet the requirements of the standard. Airbag introduction was stimulated by the National Highway Traffic Safety Administration. However, airbags were not mandatory on light trucks until 1997.
In 1998, FMVSS 208 was amended to require dual front airbags, and reduced-power, second-generation airbags were also mandated. This was due to the injuries caused by first-generation airbags, though FMVSS 208 continues to require that bags be engineered and calibrated to be able to "save" the life of an unbelted 50th-percentile size and weight "male" crash test dummy. Technical performance and validation requirements for the inflator assembly used in airbag modules are specified in SAE USCAR 24-2.
Outside the United StatesEdit
Some countries outside North America adhere to internationalized European ECE vehicle and equipment regulations rather than the United States Federal Motor Vehicle Safety Standards. ECE airbags are generally smaller and inflate less forcefully than United States airbags, because the ECE specifications are based on belted crash test dummies. In the United Kingdom, and most other developed countries there is no direct legal requirement for new cars to feature airbags. Instead, the Euro NCAP vehicle safety rating encourages manufacturers to take a comprehensive approach to occupant safety; a good rating can only be achieved by combining airbags with other safety features. Thus almost all new cars now come with at least two airbags as standard.
The examples and perspective in this section may not represent a worldwide view of the subject. (September 2008) (Learn how and when to remove this template message)
Inadvertent airbag deployment while the vehicle is being serviced can result in severe injury, and an improperly installed or defective airbag unit may not operate or perform as intended. Some countries impose restrictions on the sale, transport, handling, and service of airbags and system components. In Germany, airbags are regulated as harmful explosives; only mechanics with special training are allowed to service airbag systems.
Some automakers (such as Mercedes-Benz) call for the replacement of undeployed airbags after a certain period of time to ensure their reliability in an accident. One example is the 1992 S500, which has an expiry date sticker attached to the door pillar. Some Škoda vehicles indicate an expiry date of 14 years from the date of manufacture. In this case, replacement would be uneconomic as the car would have negligible value at 14 years old, far less than the cost of fitting new airbags. Volvo has stated that "airbags do not require replacement during the lifetime of the vehicle," though this cannot be taken as a guarantee on the device.
Although the millions of installed airbags in use have an excellent safety record, some limitations on their ability to protect car occupants exist. The original implementation of front airbags did little to protect against side collisions, which can be more dangerous than frontal collisions because the protective crumple zone in front of the passenger compartment is completely bypassed. Side airbags and protective airbag curtains are increasingly being required in modern vehicles to protect against this very common category of collisions.
Airbags are designed to deploy once only, so are ineffective if any further collisions occur after an initial impact. Multiple impacts may occur during certain rollover accidents or other incidents involving multiple collisions, such as many multivehicle collisions.
An extremely dangerous situation occurs during "underride collisions", in which a passenger vehicle collides with the rear of a tractor-trailer lacking a rear underride guard, or hits the side of such a trailer not equipped with a side underride guard. The platform bed of a typical trailer is roughly at the head height of a seated adult occupant of a typical passenger car. This means not much of a barrier exists between a head and the edge of the trailer platform, except a glass windshield. In an underride collision, the car's crush zones designed to absorb collision energy are completely bypassed, and the airbags may not deploy in time because the car does not decelerate appreciably until the windshield and roof pillars have already impacted the trailer bed. Even delayed inflation of airbags may be useless because of major intrusion into the passenger space, leaving occupants at high risk of major head trauma or decapitation in even low-speed collisions. Western European standards for underride guards have been stricter than North American standards, which typically have allowed grandfathering of older equipment that may still be on the road for decades.
Typical airbag systems are completely disabled by turning off the ignition key. Unexpected turnoffs usually also disable the engine, power steering, and power brakes, and may be the direct cause of an accident. If a violent collision occurs, the disabled airbags will not deploy to protect vehicle occupants. In 2014, General Motors admitted to concealing information about fatal accidents caused by defective ignition switches that would abruptly shut down a car (including its airbags). Between 13 and 74 deaths have been directly attributed to this defect, depending on how the fatalities are classified.
Injuries and fatalitiesEdit
Under some rare conditions, airbags can injure and in some very rare instances kill vehicle occupants. To provide crash protection for occupants not wearing seat belts, United States airbag designs trigger much more forcefully than airbags designed to the international ECE standards used in most other countries. Recent "smart" airbag controllers can recognize if a seatbelt is used, and alter the airbag cushion deployment parameters accordingly.
In 1990, the first automotive fatality attributed to an airbag was reported. TRW produced the first gas-inflated airbag in 1994, with sensors and low inflation-force bags becoming common soon afterwards. Dual-depth (also known as dual-stage) airbags appeared on passenger cars in 1998. By 2005, deaths related to airbags had declined, with no adult deaths and two child deaths attributed to airbags that year. However, injuries remain fairly common in accidents with an airbag deployment.
Serious injuries are less common, but severe or fatal injuries can occur to vehicle occupants very near an airbag or in direct contact when it deploys. Such injuries may be sustained by unconscious drivers slumped over the steering wheel, unrestrained or improperly restrained occupants who slide forward in the seat during precrash braking, and properly belted drivers sitting very close to the steering wheel. A good reason for the driver not to cross hands over the steering wheel, a rule taught to most learner drivers, but quickly forgotten by most, is that an airbag deployment while negotiating a turn may result in the driver's hand(s) being driven forcefully into his or her face, exacerbating any injuries from the airbag alone.
Improvements in sensing and gas-generator technology have allowed the development of third-generation airbag systems that can adjust their deployment parameters to size, weight, position, and restraint status of the occupant. These improvements have demonstrated a reduced injury risk factor for small adults and children, who had an increased risk of injury with first-generation airbag systems.
One model of airbags made by the Takata Corporation used ammonium nitrate–based gas-generating compositions in airbag inflators instead of the more stable, but more expensive compound tetrazole. The ammonium nitrate-based inflators have a flaw where old inflators with long-term exposure to hot and humid climate conditions could rupture during deployment, projecting metal shards though the airbag and into the driver. The defect caused seven deaths and over 100 injuries in the U.S., and one death in Malaysia. The National Highway Traffic Safety Administration (NHTSA) recalled over 33 million vehicles in May 2015, and fined Takata $70 million in November 2015. Toyota, Mazda, and Honda have said that they will not use ammonium-nitrate inflators.
Airbag fatality statisticsEdit
From 1990 to 2000, the United States NHTSA identified 175 fatalities caused by air bags. Most of these (104) have been children. About 3.3 million air-bag deployments have occurred during that interval, and the agency estimates more than 6,377 lives were saved and countless injuries were prevented.
A rear-facing infant restraint put in the front seat of a vehicle places an infant's head close to the airbag, which can cause severe head injuries or death if the airbag deploys. Some modern cars include a switch to disable the front-passenger airbag, in case a child-supporting seat is used there (although not in Australia, where rear-facing child seats are prohibited in the front where an airbag is fitted).
In vehicles with side airbags, it is dangerous for occupants to lean against the windows, doors, and pillars, or to place objects between themselves and the side of the vehicle. Articles hung from a vehicle's clothes hanger hooks can be hazardous if the vehicle's side-curtain airbags deploy. A seat-mounted airbag may also cause internal injury if the occupant leans against the door.
Aerospace and military applicationsEdit
The aerospace industry and the United States government have applied airbag technologies for many years. NASA and United States Department of Defense have incorporated airbag systems in various aircraft and spacecraft applications as early as the 1960s.
Spacecraft airbag landing systemsEdit
The first use of airbags for landing were Luna 9 and Luna 13, which landed on the Moon in 1966 and returned panoramic images. As with later missions, these would use the airbags to bounce along the surface, absorbing landing energy. The Mars Pathfinder lander employed an innovative airbag landing system, supplemented with aerobraking, parachute, and solid rocket landing thrusters. This prototype successfully tested the concept, and the two Mars Exploration Rover Mission landers employed similar landing systems. The Beagle 2 Mars lander also tried to use airbags for landing; the landing was successful, and the lander touched down safely, but several of the spacecraft's solar panels failed to deploy, thereby disabling the spacecraft.
Aircraft airbag landing systemsEdit
The United States Army has incorporated airbags in its UH-60A/L Black Hawk and OH-58D Kiowa Warrior helicopter fleets. The Cockpit Air Bag System (CABS) consists of forward and lateral airbags, and an inflatable tubular structure (on the OH-58D only) with an Electronic Crash Sensor Unit (ECSU). The CABS system was developed by the United States Army Aviation Applied Technology Directorate, through a contract with Simula Safety Systems (now BAE Systems). It is the first conventional airbag system for occupant injury prevention (worldwide) designed and developed and placed in service for an aircraft, and the first specifically for helicopter applications.
- "The Global Automotive Airbag Market Outlook". Valient Automotive Market Research. Archived from the original on 23 June 2015. Retrieved 22 June 2015.
- "Who Invented Airbags?". ThoughtCo. Retrieved 19 October 2018.
- Varela, Kristin (19 June 2013). "How Many Airbags Are Enough?". Car.com. Archived from the original on 15 November 2017. Retrieved 14 November 2017.
- Warner, Kenneth E. (1983). "Bags, Buckles, and Belts: The Debate over Mandatory Passive Restraints in Automobiles". Journal of Health Politics, Policy and Law. 8 (1): 44–75. doi:10.1215/03616878-8-1-44. Archived from the original on 26 July 2011. Retrieved 16 March 2014.
- "U.S. air bag history". Motorvista.com. 2000. Archived from the original on 1 October 2013. Retrieved 16 March 2014.
- "U.S. patent 6272412 – Passive restraint control system for vehicles". Patentstorm.us. Archived from the original on 12 June 2011. Retrieved 2010-10-17.
- "Passive Seatbelt Systems and the 65 MPH Speed Limit: A Cause for Concern". Alexander Law Group. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Circular Letter No. 10 (1991): Auto Insurance Premium Discounts For Passive Restraints". New York State Department of Financial Services. 12 April 1991. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- Rotorcraft Active Crash Protection Systems Archived 23 June 2017 at the Wayback Machine
- "University of Birmingham to unveil new 'blue plaque' celebrating the work of two innovative dentists". Birmingham Dental Hospital. 13 March 2019. Retrieved 18 March 2019.
- United States 1,331,359, Harold Arthur Round & Arthur Parrott
- Meier, Urs (2012). "1 Non Finito: challenges in rehabilitation". In Fardis, Michael N. (ed.). Innovative Materials and Techniques in Concrete Construction: ACES Workshop. Springer. p. 12. ISBN 9789400719965. Retrieved 16 March 2014.
- Khan, Moin.S. "Air Bags for Automobiles". Textile Learner. Archived from the original on 18 November 2012. Retrieved 22 September 2016.
- Mastinu, Giampiero; Ploechl, Manfred, eds. (2014). Road and Off-Road Vehicle System Dynamics Handbook. CRC Press. p. 1613. ISBN 9780849333224. Retrieved 22 September 2016.
- "Safety Cushion for Automotive Vehicles". United States Patent and Trademark Office. Retrieved 22 September 2016.
- Bellis, Mary (19 April 2017). "The History of Airbags". The Thought Company. Archived from the original on 14 July 2017. Retrieved 22 September 2016.
- Hutchinson, Alex (2009). Big Ideas: 100 Modern Inventions That Have Transformed Our World. Sterling Publishing. p. 136. ISBN 9781588167224. Retrieved 22 September 2016.
- "Airbag History – When Was The Airbag Invented?". Airbagsolutions.com. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "The History of Airbags". Inventors.about.com. Retrieved 16 March 2014.
- Weil, Roman L.; Frank, Peter B.; Kreb, Kevin D., eds. (2009). Litigation services handbook: the role of the financial expert. John Wiley. p. 22.6. ISBN 9780470286609. Retrieved 16 March 2014.
- "Achievements of Yasuzaburou Kobori" (in Japanese). Japan Automotive Hall of Fame. Archived from the original on 2 August 2013. Retrieved 16 March 2014.
Source of creative ideas, [he] started the development of the air bag as a starting point to develop a safety net of motor vehicles in 1964.
- "「エアバッグ」生みの親は日本人だった （週刊SPA!）". Archived from the original on 19 May 2015.
- SPA!. "エアバッグ - airbag.jpg – 日刊SPA!". 日刊SPA!. Archived from the original on 23 March 2015.
- Ravop, Nick (14 January 2000). "Allen K. Breed, 72, a Developer Of Air Bag Technology for Cars". The New York Times. Archived from the original on 2 April 2015. Retrieved 28 March 2015.
- Popular Science Archived 29 February 2008 at the Wayback Machine May, 1968
- "Inventor of the Week: Archive". Web.mit.edu. Archived from the original on 18 March 2009. Retrieved 27 February 2010.
- Safety Design, John Fenton, The Times 24 January 1969.
- Phillips, David (31 October 2011). "Impalas' 1973 experimental airbags held up: Fleet customers tested 1,000 vehicles with cutting-edge technology". Automotive News. Retrieved 16 November 2017.
- Tullis, Paul (7 June 2013). "Air Bag – Who Made That? The Magazine's 2013 Innovations Issue". Nytimes.com. Archived from the original on 15 February 2014. Retrieved 16 March 2014.
- "GM's Acrs". Airbagcrash.com. 2001. Archived from the original on 23 February 2014. Retrieved 16 March 2014.
- "1975 Cadillac Brochure". Oldcarbrochures.com. p. 25. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "1974 Oldsmobile Air Cushion Folder". Oldcarbrochures.com. pp. 6–7. Archived from the original on 13 December 2014. Retrieved 16 March 2014.
- "240 Landmarks of Japanese Automotive Technology – Subaru Legend airbag system". Society of Automotive Engineers of Japan. Archived from the original on 23 November 2014. Retrieved 16 March 2014.
- Godshall, Jeffery. "Form, Function, and Fantasy – seventy years of Chrysler design". Automobile Quarterly. 32 (4): 70–71. ISBN 9781596139275. Retrieved 27 April 2019.
- "Chrysler Introduces Driver-Side Air Bags". Automotive Fleet. July 1988. Archived from the original on 16 March 2014. Retrieved 27 April 2019.
- Shaw, William H. (2011). Business ethics. Wadsworth/Cengage. p. 220. ISBN 9780495808763. Retrieved 16 March 2014.
- Lamm, Michael (July 1993). "Jeep Grand Cherokee – another home run for the home team". Popular Mechanics. 170 (7): 25–27. Retrieved 16 March 2014.
- Pressler, Larry, ed. (1996). Air Bag Safety: Hearing Before the Committee on Commerce, Science, & Transportation, U.S. Senate. Dianne Publishing. p. 147. ISBN 9780788170676. Retrieved 16 March 2014.
- "Chrysler air bag production hits 4 million units" (Press release). thefreelibrary.com. PRNewswire. 19 April 1993. Retrieved 16 March 2014.
- "Design and Engineering Awards". Popular Mechanics. 171 (1): 24. January 1994. Retrieved 16 March 2014.
- Cohn, D'Vera; Henderson, Nell (31 March 1990). "Va. Crash Shines Spotlight on Air Bags; Safety Experts Say They Feel Vindicated in 20-Year Battle". The Washington Post. p. A.01. Archived from the original on 13 October 2017.
- "Air Bags Save 2 Lives In Historic Collision". Orlando Sentinel. 1 April 1990. Archived from the original on 18 August 2016.
- "Dueling Air Bags Allow Two Virginia Drivers to Walk Away from a Horrifying Head-on Collision", People, vol. 33 no. 16, 23 April 1990, archived from the original on 14 September 2016
- Office of Research and Development (21 June 2001). "Air Bag Technology in Light Passenger Vehicles" (PDF). U.S. NHTSA. p. 1. Archived (PDF) from the original on 15 December 2014. Retrieved 16 March 2014.
- "Sep 1, 1998: Federal legislation makes airbags mandatory". history.com. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- Wilson, Robert (3 August 2005). "Citroen C4". The Australian. Archived from the original on 12 May 2006. Retrieved 3 November 2009.
- "IIHS-HLDI: Chevrolet Cobalt 4-door". Iihs.org. Archived from the original on 23 May 2013. Retrieved 16 March 2014.
- "IIHS-HLDI: Dodge Ram 1500". Iihs.org. 16 March 2014. Archived from the original on 10 April 2010.
- "Johnson Controls develops and manufactures the instrument panel, seating system, door panels and acoustic parking system for the new Mercedes-Benz A-Class". Archived from the original on 2 March 2017. Retrieved 11 May 2018.
- Rik Paul (1 January 1996). "1996 Mercedes-Benz E-Class – Roadtest – European Car". Jerry Garns (photographer). MotorTrend. Archived from the original on 4 March 2018. Retrieved 11 May 2018.
- "Dual chamber side airbag apparatus and method". freepatentsonline.com. 20 June 2006. Retrieved 11 May 2018.
- "2008 Honda Accord – Safety". American Honda Motor Co. 21 August 2007. Archived from the original on 2 March 2017. Retrieved 11 May 2018.
- "All New Volvo S80: Style, Sophistication, Safety and Scandinavian". Volvo Car Corporation. 28 February 2006. Archived from the original on 2 March 2017. Retrieved 1 March 2017.
- "Dual-chamber Side Airbags". 23 October 2009. Archived from the original on 2 February 2017. Retrieved 26 January 2017.
- Jakobsson, Lotta; Lindman, Magdalena; Svanberg, Bo; Carlsson, Henrik (2010). "Real World Data Driven Evolution of Volvo Cars' Side Impact Protection Systems and their Effectiveness". Annals of Advances in Automotive Medicine / Annual Scientific Conference. 54: 127–136. ISSN 1943-2461. PMC 3242537. PMID 21050597.
- "Second-Generation Sips-Bag protects both chest and head". Volvo Car Corporation. 17 July 1998. Archived from the original on 30 June 2015. Retrieved 11 May 2018.
- "Zodiac Coating – Medical Silicone Gel Components". zodiacautomotive.com. Archived from the original on 9 January 2015. Retrieved 3 September 2018.
- BMW of North America (30 October 1997). "BMW Head Protection System Sets New Standard in Side-Impact Protection in Latest IIHS Crash Test" (Press release). Theautochannel.com. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Toyota to Make Side Airbags and Curtain Shield Airbags Standard on All New Passenger Vehicle Models in Japan". Theautochannel.com. 23 July 2007. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Volvo S80". www.volvoclub.org.uk. Archived from the original on 2 January 2016. Retrieved 11 May 2018.
- "Side-Impact Air Bags (SABs)". Safercar.gov. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Kia Motors' Knee Airbag System | Firehouse.com". Cms.firehouse.com. Archived from the original on 31 July 2007. Retrieved 8 December 2009.
- "New Air Bag Will Aim For Knees, Legs". latimes. Archived from the original on 8 December 2015.
- "Technical Development: Electronics Parts". toyota-global.com. Archived from the original on 24 March 2015.
- "Airbags". Toyota Europe. Archived from the original on 24 June 2009.
- "Euro NCAP praises the new Driver-Side SRS Knee Airbag manufactured by Toyoda Gosei" (Press release). Toyoda Gosei. 30 June 2003. Archived from the original on 19 June 2013. Retrieved 16 March 2014.
- "Toyota Avensis". Euro NCAP. Archived from the original on 24 June 2013. Retrieved 16 March 2014.
- Abuelsamid, Sam (30 September 2008). "Toyota develops rear curtain airbag for tiny iQ". Autobloggreen.com. Archived from the original on 14 April 2009. Retrieved 16 March 2014.
- "Archived copy". Archived from the original on 25 February 2016. Retrieved 1 March 2017.CS1 maint: archived copy as title (link)
- "Toyota Develops World's First Rear-seat Center Airbag". Worldcarfans.com. 11 March 2009. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- Bowman, Zach (29 September 2011). "GM debuts new front center airbag". Autoblog. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Ford Expands Availability of Rear Inflatable Safety Belt to 2014 Fusion". ford.com. Archived from the original on 6 October 2015. Retrieved 17 September 2015.
- "Takata First to Commercialize Front Seat Safety "Airbelt" for Passenger Cars" (Press release). us.aving.net/news. 6 December 2010. Archived from the original on 26 April 2014. Retrieved 11 April 2013.
- "2012 Lexus LFA". caranddriver.com. Archived from the original on 14 September 2015.
- "Extended protection in the rear: The seat belt gets into top shape". daimler.com. 19 November 2012. Archived from the original on 2 January 2016. Retrieved 17 September 2015.
- "Ford Mondeo Introduces Inflatable Seatbelts, a Ford First for Australian customers". ford.com. Archived from the original on 2 January 2016.
- "The Ford inflatable seat belt: How it affects car seats and children". consumerreports.org. Archived from the original on 16 September 2015.
- "AmSafe Inflatable Seatbelts". Cessna. Archived from the original on 14 September 2015.
- "Are Airbags Worth the Money?". Flying Magazine. Archived from the original on 2 January 2016.
- "PEDESTRIAN AIRBAG TECHNOLOGY – A PRODUCTION SYSTEM" (PDF). Archived from the original (PDF) on 4 October 2016. Retrieved 4 July 2016.
- LandRoverMENA (1 October 2014). "Land Rover Discovery Sport – Pedestrian Airbag". Archived from the original on 2 June 2017 – via YouTube.
- "YouTube". www.youtube.com. Archived from the original on 2 June 2017.
- Joshua Dowling (17 February 2013). "Volvo offers world's first pedestrian airbag". Archived from the original on 2 December 2014. Retrieved 5 July 2016.
- "Volvo V40". Euro NCAP. August 2013. Archived from the original on 15 October 2013. Retrieved 16 March 2014.
- "NEW DISCOVERY SPORT ACHIEVES FIVE STAR EURO NCAP RATING". Archived from the original on 18 August 2016. Retrieved 4 July 2016.
- "'06 Wing gets airbag". Motorcycle News. 2 September 2005. Archived from the original on 12 February 2009.
- Rob Hull (21 November 2007). "Dainese airbag suit in action". Motorcycle News. Archived from the original on 14 February 2009.
- "Dainese tests electronically operated airbag system for motorcycle racing". Archived from the original on 7 October 2011. Retrieved 31 October 2012.
- "Alpinestars airbag system explained". Archived from the original on 22 July 2012. Retrieved 31 October 2012.
- "Airbag control unit". Audi. Archived from the original on 5 December 2008.
- "Media Center". Continental.com. Archived from the original on 10 July 2012.
- Garcia P., "A Methodology for the Deployment of Sensor Networks", IEEE Transactions On Knowledge And Data Engineering, vol. 11, no. 4, December 2011.
- US 5089069, Coodly P. Ramaswamy & Francis Souriraja, "Gas generating composition for air bags", published 18 February 1992
- Tests on Airbags: Analyses of Gases, Dusts, Structures and Squibs Archived 2 February 2014 at the Wayback Machine
- Akiyoshi, Miyako; Nakamura, Hidetsugu; Hara, Yasutake (2000). "The Strontium Complex Nitrates of Carbohydrazide as a Non-Azide Gas Generator for Safer Driving-the Thermal Behavior of the Sr Complex with Various Oxidizing Agents". Propellants, Explosives, Pyrotechnics. 25 (5): 224–229. doi:10.1002/1521-4087(200011)25:5<224::AID-PREP224>3.0.CO;2-O.
- US patent 6958101, Ivan V. Mendenhall, Robert D. Taylor, "Substituted basic metal nitrates in gas generation"
- "Safercar.gov". Safercar.gov. Archived from the original on 16 April 2010. Retrieved 17 October 2010.
- "What You Need to Know About Air Bags, DOT HS 809 575". Nhtsa.gov. Archived from the original on 28 May 2010. Retrieved 17 October 2010.
- "What You Need to Know About Air Bags, DOT HS 809 575". Nhtsa.dot.gov. Archived from the original on 26 November 2009. Retrieved 16 March 2014.
- "ET 08/00: Sodium azide in car airbags poses a growing environmental hazard". Sdearthtimes.com. Archived from the original on 17 September 2014. Retrieved 16 March 2014.[better source needed]
- "Thermally stable nonazide automotive airbag propellants – Patent 6306232". Freepatentsonline.com. Archived from the original on 16 March 2014. Retrieved 16 March 2014.[non-primary source needed][better source needed]
- Bloch, Byron (1998). "Advanced designs for side impact and rollover protection" (PDF). NHTSA. Archived from the original (PDF) on 25 November 2014. Retrieved 16 March 2014.
- "Federal Motor Vehicle Safety Standards and Regulations (Standard No. 208)". Nhtsa.gov. March 1999. Archived from the original on 7 May 2014. Retrieved 16 March 2014.
- "USCAR24-22: Inflator Technical Requiremtns and Validation". SAE International. 30 April 2013. Archived from the original on 6 January 2014. Retrieved 16 March 2014.
- Frontal impact test description Archived 6 May 2008 at the Wayback Machine Euro NCAP website
- Bohr, Peter (July–August 2010), "Air Time", AAA World, 12 (4), p. 24
- "Curtain air bag". Hyundai Sonata: Manuals and Car Information. www.hsguide.net. Archived from the original on 14 July 2014. Retrieved 7 June 2014.
- "Gettiing Started". Underride Network. Underride Network. Archived from the original on 14 July 2014. Retrieved 7 June 2014.
- Underride Guard on Everything2 Archived 15 March 2008 at the Wayback Machine; Retrieved: 2007-11-29
- United States Congressional Committee on Commerce (1997). Reauthorization of the National Highway Traffic Safety Administration. p. 39.
- Feeney, Nolan (3 June 2014). "GM Disputes Report Tying Ignition Switch Problem to 74 Deaths". Time. Archived from the original on 3 June 2014. Retrieved 4 June 2014.
- "NHTSA 49 CFR Parts 552, 571, 585, and 595, Docket Notice". Nhtsa.gov. 1 December 2000. Archived from the original on 16 March 2014. Retrieved 16 March 2014.
- "Statistical Breakdown of Air Bag Fatalities". National Highway Traffic Safety Administration. Archived from the original on 26 February 2008. Retrieved 16 March 2014.
- Olson, Carin M.; Cummings, Peter; Rivara, Frederick P. (2006). "Association of First- and Second-Generation Airbags with Front Occupant Death in Car Crashes: A Matched Cohort Study" (PDF). American Journal of Epidemiology. 164 (2): 161–9. doi:10.1093/aje/kwj167. PMID 16775043. Archived (PDF) from the original on 27 February 2009. Retrieved 16 March 2014.
- "NHTSA Recalls Spotlight – Takata Air Bag Recalls – November 3, 2015 Press Conference". nhtsa.gov. Archived from the original on 2 January 2016.
- "Honda, Government Confirm 8th Death From Takata Air Bags". New York Times. 19 June 2015. Archived from the original on 22 June 2015.
- "Archived copy". Archived from the original on 8 August 2016. Retrieved 10 December 2016.CS1 maint: archived copy as title (link)
- "Takata fined $70 million for defective airbags as recalls nearly double". LA Times. Archived from the original on 3 November 2015. Retrieved 3 November 2015.
- "Takata's Woes Are Complete: Now Toyota Has Dropped It – Fortune". Fortune. Archived from the original on 9 November 2015.
- "Japan air bag maker Takata reports $46 million loss". The Big Story. Archived from the original on 2 January 2016.
- The statement "they've saved some 26,000 lives, according to estimates from the ... (NHTSA)" has been published. Bohr, Peter (July–August 2010), "Air Time", AAA World, 12 (4), p. 24
- Toyota Aurion: User Manual 2006 model – Australia
- Hallman, JJ; Brasel, KJ; Yoganandan, N; Pintar, FA (October 2009). "Splenic trauma as an adverse effect of torso-protecting side airbags: biomechanical and case evidence". Ann Adv Automot Med. 53: 13–24. PMC 3256804. PMID 20184829.
- Hallman, JJ; Yoganandan, N; Pintar, FA (November 2010). "Biomechanical and injury response to posterolateral loading from torso side airbags". Stapp Car Crash J. 54: 227–57. PMC 3820120. PMID 21512911.
- "Defenselink article". Defenselink.mil. 18 February 1999. Archived from the original on 16 March 2014.
- US Army Demonstrates Simula's Cockpit Air Bag System Archived 29 August 2008 at the Wayback Machine at Helios.com
- "OH-58D Kiowa Warrior". Fas.org. 29 May 2000. Archived from the original on 14 October 2006. Retrieved 16 March 2014.
- "Microsoft Word - Sunset Brochure.doc" (PDF). Archived from the original (PDF) on 13 September 2005. Retrieved 17 October 2010.
- "Air Defense concept papers". Csat.au.af.mil. Archived from the original on 12 August 2010. Retrieved 17 October 2010.
- "BNET News Release on AHS Annual Forum award". Findarticles.com. 13 June 2002. Archived from the original on 12 July 2012. Retrieved 17 October 2010.
- Simula Receives Orders for its Cockpit Air Bag Systems at All Business.com Archived 22 May 2010 at the Wayback Machine
|Wikimedia Commons has media related to Airbags.|
- Air bag (restraint system) at the Encyclopædia Britannica
- Chemistry behind airbags
- Pictures and details about the 1970s GM Air Cushion Restraint System
- Magratten, Drew (14 September 2014). "The Promise of the Air Bag". Retro Report. Retrieved 4 April 2018., history of air bags and how the technology gave rise to today's "smart cars."