Advanced power management (APM) is an API developed by Intel and Microsoft and released in 1992 which enables an operating system running an IBM-compatible personal computer to work with the BIOS (part of the computer's firmware) to achieve power management.
Revision 1.2 was the last version of the APM specification, released in 1996. ACPI is the successor to APM. Microsoft dropped support for APM in Windows Vista. The Linux kernel still mostly supports APM, though support for APM CPU idle was dropped in version 3.0.
APM uses a layered approach to manage devices. APM-aware applications (which include device drivers) talk to an OS-specific APM driver. This driver communicates to the APM-aware BIOS, which controls the hardware. There is the ability to opt out of APM control on a device-by-device basis, which can be used if a driver wants to communicate directly with a hardware device.
Communication occurs both ways; power management events are sent from the BIOS to the APM driver, and the APM driver sends information and requests to the BIOS via function calls. In this way the APM driver is an intermediary between the BIOS and the operating system.
Power management happens in two ways; through the above-mentioned function calls from the APM driver to the BIOS requesting power state changes, and automatically based on device activity.
In APM 1.0 and APM 1.1, power management is almost fully controlled by the BIOS. In APM 1.2, the operating system can control PM time (e.g. suspend timeout).
Power management eventsEdit
There are 12 power events (such as standby, suspend and resume requests, and low battery notifications), plus OEM-defined events, that can be sent from the APM BIOS to the operating system. The APM driver regularly polls for event change notifications.
Power Management Events:
|System Standby Request Notification||0x0001|
|System Suspend Request Notification||0x0002|
|Normal Resume System Notification||0x0003|
|Critical Resume System Notification||0x0004|
|Battery Low Notification||0x0005|
|Power Status Change Notification||0x0006|
|Update Time Notification||0x0007|
|Critical System Suspend Notification||0x0008|
|User System Standby Request Notification||0x0009|
|User System Suspend Request Notification||0x000A|
|System Standby Resume Notification||0x000B|
|Capabilities Change Notification||0x000C||Due to setup or device insertion/removal|
There are 21 APM function calls defined that the APM driver can use to query power management statuses, or request power state transitions. Example function calls include letting the BIOS know about current CPU usage (the BIOS may respond to such a call by placing the CPU in a low-power state, or returning it to its full-power state), retrieving the current power state of a device, or requesting a power state change.
|APM Installation Check||0x00|
|APM Real Mode Interface Connect||0x01|
|APM Protected Mode 16-bit Interface Connect||0x02||Avoids real or virtual86 mode.|
|APM Protected Mode 32-bit Interface Connect||0x03||Avoids real or virtual86 mode.|
|APM Interface Disconnect||0x04|
|CPU Idle||0x05||Requests system suspend. |
0) Clock halted until timer tick interrupt.
1) Slow clock
|CPU Busy||0x06||Driver tells system APM to restore clock speed of the CPU.|
|Set Power State||0x07||Set system or device into Suspend/Standby/Off state.|
|Enable/Disable Power Management||0x08|
|Restore APM BIOS Power-On Defaults||0x09|
|Get Power Status||0x0A||Supports AC status "On backup power". And battery status.|
|Get PM Event||0x0B||Checks for APM events. Shall be called once per second.|
|Get Power State||0x0C|
|Enable/Disable Device Power Management||0x0D|
|APM Driver Version||0x0E|
|Engage/Disengage Power Management||0x0F||APM management for a specific device.|
|Get/Set/Disable Resume Timer||0x11|
|Enable/Disable Resume on Ring Indicator||0x12|
|Enable/Disable Timer Based Requests||0x13|
|OEM APM Installation Check||0x80||Tells if APM BIOS supports OEM hardware dependent functions.|
|OEM APM Function||0x80||Access to OEM specific functions.|
The APM specification defines system power states and device power states.
System power statesEdit
APM defines five power states for the computer system:
- Full On: The computer is powered on, and no devices are in a power saving mode.
- APM Enabled: The computer is powered on, and APM is controlling device power management as needed.
- APM Standby: Most devices are in their low-power state, the CPU is slowed or stopped, and the system state is saved. The computer can be returned to its former state quickly (in response to activity such as the user pressing a key on the keyboard).
- APM Suspend: Most devices are powered off, but the system state is saved. The computer can be returned to its former state, but takes a relatively long time. (Hibernation is a special form of the APM Suspend state).
- Off: The computer is turned off.
Device power statesEdit
APM also defines power states that APM-aware hardware can implement. There is no requirement that an APM-aware device implement all states.
The four states are:
- Device On: The device is in full power mode.
- Device Power Managed: The device is still powered on, but some functions may not be available, or may have reduced performance.
- Device Low Power: The device is not working. Power is maintained so that the device may be 'woken up'.
- Device Off: The device is powered off.
The CPU core (defined in APM as the CPU clock, cache, system bus and system timers) is treated specially in APM, as it is the last device to be powered down, and the first device to be powered back up. The CPU core is always controlled through the APM BIOS (there is no option to control it through a driver). Drivers can use APM function calls to notify the BIOS about CPU usage, but it is up to the BIOS to act on this information; a driver cannot directly tell the CPU to go into a power saving state.
In ATA drivesEdit
The ATA specification and SATA specification defines APM provisions for hard drives, which specifies a trade-off between spin-down frequency and always-on performance. Unlike the BIOS-side APM, the ATA APM and SATA APM has never been deprecated.
Aggressive spin-down frequencies may reduce drive lifespan by unnecessarily accumulating load cycles; most modern drives are specified to sustain 300,000 cycles and usually last at least 600,000. On the other hand, not spinning down the drive will cause extra power draw and heat generation; high temperatures also reduce the lifespan of hard drives.
- "Advanced Power Management (APM) BIOS Interface Specification Revision 1.2 February 1996 Intel/Microsoft". Archived from the original on 26 February 2012. Retrieved 27 December 2006. 090429
- "linux - What do different values of hard drive's Advanced Power Management feature (hdparm -B) affect, except spin-down?". Super User.
The ATA Spec turns up this tidbit: Subcommand code 05h allows the host to enable Advanced Power Management. To enable Advanced Power Management, the host writes the Sector Count register with the desired advanced power management level and then executes a SET FEATURES command with subcommand code 05h.
- bwDraco. "linux - How much "Load_cycle_count" can my hard drive hypotethically sustain?". Super User.