(Redirected from 2-6-2T)

Under the Whyte notation for the classification of steam locomotives, 2-6-2 represents the wheel arrangement of two leading wheels, six coupled driving wheels and two trailing wheels. This arrangement is commonly called a Prairie.

2-6-2 (Prairie)
Diagram of one small leading wheel, three large driving wheels joined together with a coupling rod, and one small trailing wheel
CGR 2nd Class no. 2 (2-6-2T & 2-6-2TT) of 1875.jpg
CGR 2nd Class of 1875, the first 2-6-2
Equivalent classifications
UIC class1C1, 1'C1'
French class131
Turkish class35
Swiss class3/5
Russian class1-3-1
First known tank engine version
First use1875
CountryCape of Good Hope
LocomotiveCGR 2nd Class 2-6-2TT
RailwayCape Government Railways
DesignerRobert Stephenson and Company
BuilderRobert Stephenson and Company
BenefitsBetter stability than a mogul
First known tender engine version
First use1884
CountryNew Zealand
RailwayNew Zealand Railways Department
BuilderNasmyth, Wilson and Company
Evolved from2-6-0


The majority of American 2-6-2s were tender locomotives, but in Europe tank locomotives, described as 2-6-2T, were more common. The first 2-6-2 tender locomotives for a North American customer were built by Brooks Locomotive Works in 1900 for the Chicago, Burlington and Quincy Railroad, for use on the Midwestern prairies. The type was thus nicknamed the Prairie in North American practice. This name was often also used for British locomotives with this wheel arrangement.

As with the 2-10-2, the major problem with the 2-6-2 is that these engines have a symmetrical wheel layout, with the centre of gravity almost over the centre driving wheel. The reciprocation rods, when working near the centre of gravity, induce severe side-to-side nosing which results in intense instability if unrestrained either by a long wheelbase or by the leading and trailing trucks. Though some engines, like the Chicago and Great Western of 1903, had the connecting rod aligned onto the third driver, most examples were powered via the second driver and were prone to the nosing problem.[1]



Queensland Railways operated one 2-6-2 tender engine of the B16 1/2 class. It was built in August 1918 by the North Ipswich Railway Workshops as an experimental engine burning coke instead of coal. After nearly 9 years burning coke, it was converted to coal in 1927. The engine spent its working life on the Brisbane to Ipswich line working coal trains. It was withdrawn in February 1950.

In New South Wales a class of twenty engines, the Z26 class, formerly the (I)17 class, entered service in 1892 and operated until the end of steam. Two are preserved, no. 2606 at the Rail Transport Museum at Thirlmere and no. 2605 at the State Mine Museum in Lithgow.

The Silverton Tramway operated two 2-6-2T locomotives from 1891, both of which are preserved in South Australia.

The principal 2-6-2T locomotives which were built for the 2 ft 6 in (762 mm) narrow gauge system of the Victorian Railways (VR), are the now famous "Puffing Billy" engines. Two of these little locomotives arrived from Baldwin Locomotive works in 1898 and a total of seventeen saw service throughout the state on the various narrow gauge timber and gold lines, including the Wangaratta and Walhalla. When the VR determined to close the Upper Ferntree Gully to Gembrook narrow gauge route in the mid-1950s, the Victorian community refused to let the train die. Today, the Puffing Billy Railway has a fleet of saved and modified 2-6-2T engines on active steam roster and is one of Victoria's main tourist attractions.[2]

A Type 57 at Brussels South, 1957.


The Belgian State Railways ordered 91 inside-cylinder 2-6-2 tank engines between 1878 and 1881 (Belgian State Railways Type 4) with large drivers and side tanks longer than the boiler.[3] They hauled commuter trains and fast trains on short lines. Some of them survived the war and were used on local trains until 1930.[4]

After World War I, the Belgian State Railways were desperately needing new engines in order to replace the ones that were lost or damaged during the war. They purchased 63 2-6-2 Saddle tank engines from the Railway Operating Division (Belgian State Railways Type 22, later SNCB Type 57) and used them for switching and light freight trains until the 1960s.[5]


Standard Hungarian Railways 2-6-2 of 324 class, introduced in 1909

The most numerous steam locomotive type used in Hungary was the MÁV class 324 [hu] 2-6-2, built from 1909 onwards, which were still at work in the last days of steam.

The Hungarian State Railways (MÁV) also ran three important classes of 2-6-2 tank engines. These were the large MÁV class 342 [hu] class built from 1917, and the smaller MÁV class 375 [hu] and MÁV class 376 [hu].


The Ferrovie dello Stato Italiane (Italian State Railways) built the 151-strong compound FS Class 680 for express trains from 1907 to 1911. The FS Class 685, built in 271 units from 1912 to 1928, was its non-compound and superheated version, and proved very successful, to the point that all but 31 of the earlier Class 680 were rebuilt as 685 (bringing the size of the class to 391 locomotives). The Class 685 was also the most numerous standard gauge 2-6-2 class in the world.[6]

New ZealandEdit

A fleet of five tank engines, built by Manning Wardle of Leeds in England, were supplied to New Zealand in 1884-85. The private Wellington and Manawatu Railway (WMR) used them for construction, maintenance and local service work. Three were later taken over as the New Zealand Railways (NZR) WH class in 1908.

The second batch of Prairie locomotives was built to an order for the New Zealand Railways Department, with the initial order for ten being let to Nasmyth, Wilson and Company of Manchester, England. This later became the NZR V class which, due to political interference and their being overweight, did not go into traffic until 1890.

New Zealand's third batch of Prairie locomotives was ordered by the WMR in 1884. Their design was almost identical to that of the NZR V class, though they were slightly heavier. They could burn any light fuel, coal or wood as available, and entered service in 1886, soon after the WMR started operating. In 1908, with the purchase of the company by the NZR, they were also awarded the V classification.

NZR N class prior to its NZR service, as No. 9 of the Wellington and Manawatu Railway, at Paekakariki

In 1885, Baldwin Locomotive Works built New Zealand's fourth batch of Prairie locomotives. These were to become the NZR N class. Six were delivered in 1885 and were of an almost identical design to the previous, but altered to utilise off-the-shelf components supplied by Baldwin. In 1901, four more were built for the NZR, but these were fitted with piston valves actuated by Walschaerts valve gear. In 1891, two of these locomotives had also been built to the same design for the WMR. In 1908, with the purchase of the WMR by NZR, all of these engines were classified as N class.

Between 1894 and 1904, four similar engines were built by Baldwin for the WMR. In 1908, these became the NZR's NA class and NC class, with two units each.

The NZR's Addington Workshops joined the list of Prairie suppliers in 1889, producing the first of two NZR W class tank engines. These were followed between 1892 and 1901 with eleven similar NZR WA class tank engines.

Baldwin followed this up with ten similar NZR WB class Prairie tank engines in 1898.

In 1930-31, after nearly thirty years of 4-6-2 Pacific and 4-6-4 Baltic locomotive production, New Zealand dusted off its Prairie plans with the release into service of twenty-four NZR C class 2-6-2 locomotives, designed primarily for shunting and branch line work.


PKP Class Ol49 at work in summer 1976

The H. Cegielski Metal Works in Poznań produced 122 OKl27 class 2-6-2T locomotives for the Polish State Railways (PKP) during the period between 1928 and 1933.

Between 1951 and 1954, Fablok built a series of 116 Ol49 class 2-6-2 tender locomotives for the PKP.


Romania designed the 131.000 Class to replace the older Hungarian MAV locomotives used on Căile Ferate Române (CFR) secondary lines. A total of 67 locomotives were built at Reşiţa Works between 1939 and 1942, numbered 131.001 to 131.067.[7]

Russia & Soviet UnionEdit

Russian S-series 1-3-1

In Russia, the 2-6-2 was the standard passenger locomotive. They were represented by the pre-revolutionary S (С) (Sormovskij) series and the post-revolutionary Su (Су) series locomotives, the latter of which appeared in 1928. The pre-revolutionary S-series locomotives had the characteristic pointed nose, absent on the Su locomotive. The suffix 'u' means usilenny which translates as "strengthened" or "uprated". Several Su-series locomotives are preserved in working order. However, only one pre-revolutionary S-series locomotive is still around, number S.68. It is preserved at the Saint Petersburg railway museum.

Su 206-56 in steam at the Lebyazhye Railway Museum, Lebyazhye, Lomonosovsky District, Leningrad Oblast, Russia

The Su was the standard passenger engine on most mainline routes and it was only on the key trunk lines that the IS class 2-8-4, or later the P36 4-8-4, would be used. Therefore, the majority of passenger miles were hauled by an Su (Су).

Visually, the Su was the last true Russian-look design before the American influence of high running boards, bar frames and boxpok wheels became the norm. The Su retained such features as a clerestory skylight in the cab roof and handrails on the outside of the running board. These handrails were a result of the harsh Russian winters, when ice would build up on the running boards, making them highly dangerous. Enginemen had fallen to their death from moving trains and the fitting of promenade deck style handrails was a safety measure ordered by the Tsar in pre-revolutionary times. These features, combined with the high 17 feet (5.182 metres) loading gauge, combined to give the locomotives a uniquely Russian appearance.[8][9]

South AfricaEdit

The world's first 2-6-2 Prairie type locomotives were also the first locomotives to enter service on the new Cape gauge mainline of the Cape Government Railways. They were 2-6-2 side-tank engines that were delivered between 1875 and 1879. Four-wheeled tenders were also acquired on a subsequent order and the locomotives could be operated in either a tank or tank-and-tender configuration, as circumstances demanded. These locomotives were later designated the Cape 2nd Class.[10]

Zululand Railway Co. no. 1, c. 1901

In 1901, the Zululand Railway Company, contracted for the construction of the Natal North Coast line from Verulam to the Tugela River, acquired one 2-6-2 side-tank locomotive as construction engine from Baldwin Locomotive Works. Upon completion of the line in 1903, the locomotive was taken onto the roster of the Natal Government Railways and was designated Class I.[10]

CGR 6th Class, SAR Class 6Y

The first four Prairie locomotives built for the Cape Government Railways (CGR) by Neilson, Reid and Company, later designated Class 6Z on the South African Railways (SAR), were placed in service in 1901, but they displayed the Prairie's tendency to be unsteady at speed. They were therefore soon modified to a 2-6-4 Adriatic wheel arrangement.[10]

With an improved design of bissel truck, two more CGR locomotives which were ordered from Kitson and Company in 1903 were once again built with a 2-6-2 Prairie wheel arrangement. These two locomotives did not display the tendency to sway at speed and therefore retained their 2-6-2 wheel arrangement. In 1912, when they were assimilated into the SAR, they were renumbered and designated Class 6Y.[10][11]


Tank locomotive BT Eb 3/5 no. 9 of the Dampf-Loki-Club Herisau

Switzerland had four classes of 2-6-2 tank locomotives.

  • The first was the Bodensee–Toggenburg-Bahn (BT) class Eb 3/5 (speed limit 75 km/h), of which nine were built in 1910 by Maffei, numbered 1 to 9. Seven were scrapped, no. 6 has been plinthed as a monument in Degersheim and no. 9, the only one with red trim, was preserved by the Dampf-Loki-Club Herisau in Bauma. By 2015, the Club del San Gottardo in Mendrisio began to restore them to working order.[12]
  • The second was the Swiss Federal Railways (SBB) class Eb 3/5 (speed limit 75 km/h), of which 34 were built from 1911 to 1916 by Swiss Locomotive and Machine Works (SLM), numbered 5801 to 5834. Of these, 31 were scrapped, no. 5810 was preserved by the Verein Dampfbahn Bern in Konolfingen,[13] no. 5811 stands as a monument in Baden. By 2015, the Dampfgruppe Zürich in Brugg began to restore them to working order.[14] No. 5819 was preserved by the SBB Historic in Brugg.[15]
Mostindien-Express with tank locomotive Ec 3/5 no. 3 of the Verein Historische Mittel-Thurgau-Bahn
  • The third was the class Ec 3/5 (speed limit 65 km/h) of the Lake Thun railway (TSB) and other railways of the Bern–Lötschberg–Simplon railway group (BLS). Six engines were built by SLM from 1905 to 1907, numbered 41 to 46. After electrification of the tracks in 1921/22, all six were sold to the Austrian Federal Railways and renumbered as class 130.
  • The fourth was the Mittelthurgau-Bahn (MThB) class Ec 3/5 (speed limit 60 km/h), of which four were built in 1912 by SLM, numbered 1 to 4. Three were scrapped and no. 3 was preserved by the Verein Historische Mittel-Thurgau-Bahn in Romanshorn. It occasionally pulls the so-called Mostindien-Express.[16]

In 1997, the MThB no. 3 was used as the prototype for the locomotive in the animated 20th Century Fox motion picture Anastasia, where it was given the appearance of a Soviet Union continental locomotive numbered 2747.

United KingdomEdit

Standard gaugeEdit

London and North Eastern Railway V2 class 60800 Green Arrow

The first United Kingdom 2-6-2 tender locomotive was the unsuccessful prototype Midland Railway Paget locomotive of 1908.[17] Thereafter, the wheel arrangement was rare on tender locomotives, with the exception of two classes on the London and North Eastern Railway. These were the Class V2 and Class V4 mixed traffic locomotives which totalled 186 locomotives between them.[18]

In contrast, 2-6-2T locomotives were very widely used on suburban passenger services, particularly by the Great Western Railway (GWR), who built four main classes between 1903 and 1947. These include the 'Large Prairies' (5100, 3150 and 6100 classes), the 'Small Prairies' (4400, 4500 and 4575 classes) and the non-standard 3901 class rebuilt from 0-6-0 tender engines.

The Railway Operating Division received 70 2-6-2 Saddle tank engines built by Baldwin Locomotive Works in the United States. They were shipped to France and used near the front line. These engines, nicknamed "tortoises" were probably inspired by the Saddle tanks used on forest railways in the USA ; they had very small drivers and could run tight curves. After the war, all remaining engines (63) were sold to the Belgian State Railways. The rest was probably destroyed during the war and some of them may have been cannibalised for spares.

Sir Henry Fowler of the London Midland and Scottish Railway (LMS) introduced a successful 2-6-2T class in 1930, which became the basis of further similar classes by Stanier in 1935 and Ivatt in 1946.

Sir Nigel Gresley of the London and North Eastern Railway (LNER) introduced his V1 and V3 classes in 1930.

The last new 2-6-2T locomotives in Britain were the British Railways standard class 2, built between 1953 and 1957. The design derived from the earlier LMS Ivatt Class 2 2-6-2T.

Narrow gaugeEdit

Vale of Rheidol Railway 2-6-2T No. 7 Owain Glyndŵr at Aberystwyth

The 2-6-2T layout was popular for large narrow gauge engines, but the design was modified to allow the use of a firebox much wider than the track gauge. A standard gauge 2-6-2T normally has inside frames and the firebox is placed between the second and third coupled axles. A narrow gauge one, on the other hand, has outside frames and the firebox is placed behind the third coupled axle and clear of the wheels. To minimise the rear overhang, the fuel is therefore carried in side-bunkers alongside the firebox, instead of in a rear bunker.

Preserved examples include the Welsh Highland Railway's Russell and the Vale of Rheidol Railway locomotives.

United StatesEdit

Narrow gaugeEdit

Baldwin 2-6-2T no. 104 steaming out of Hill City, South Dakota, on the Black Hills Central Railroad in 2001

The 2 ft (610 mm) gauge Sandy River and Rangeley Lakes Railroad in Franklin County, Maine, was a major narrow gauge 2-6-2 user.

Standard gaugeEdit

In the United States, the type evolved from the 2-6-0 (Mogul) configuration. The Atchison, Topeka and Santa Fe Railway (AT&SF) became a pioneer of the type in the United States in 1901 and one of the largest fleet users of the type. Problems the road encountered with the type included steam leakage in the compound cylinder plumbing and instability at speed. The former problem was solved by converting them to simplex two-cylinder locomotives; the latter problem required new 4-6-2 (Pacific) types with four-wheeled guide trucks. The Prairie types were rebuilt with smaller drivers for slightly slower fast freight service. These engines tended to enjoy very long service lives, and outlasted many a newer, more efficient steam locomotive on the Santa Fe and elsewhere. This was due to their modest weight, good speed and ability to operate well in reverse, which made them valuable for branch line operations.

A Prairie type built for the Burlington by Baldwin

In 1902, the AT&SF had a 2-6-2 with a high, at the time, boiler pressure of 220 pounds per square inch (1,517 kilopascals), mounted on a large 41-square-foot (3.8-square-meter) fire grate.[1]

More than a thousand examples of the 2-6-2 wheel arrangement existed in the United States. Of these, one hundred were high-wheeled engines with larger than 69-inch (1,753-millimeter) drivers. The Lake Shore & Michigan Southern operated locomotives with 80-inch (2,032-millimeter) drivers, but this did not overcome their inherent instability. They were never as successful in passenger service in the U.S. as they were in other nations.[1]


  1. ^ a b c Swengel, F.M. The American Steam Locomotive, Vol. 1, The Evolution of the Steam Locomotive, MidWest Rail Publications, Davenport, 1967. pp. 78-80.
  2. ^ Oberg, Leon. Railways of Australia, Reed, Sydney, 1975. (plus subsequent editions)
  3. ^ happysongs151 (2016-06-16), Etat Belge 1458, retrieved 2019-04-16
  4. ^ "Troisième période, 1864-1884 - Régime Belpaire - Rixke Rail's Archives". rixke.tassignon.be. Retrieved 2019-04-15.
  5. ^ "Neuvième période, 1914-1919 – Première guerre mondiale et locomotives « (...) - Rixke Rail's Archives".
  6. ^ Mascherpa, Erminio; Turchi, Gian Guido (1984). La regina delle locomotive. Editrice trasporti su rotaie. p. 28. ISBN 8885068022.
  7. ^ 131.000 Class Locomotive at railwayfan.ro (in Romanian)
  8. ^ Russian Steam Locomotives, LeFleming/Price
  9. ^ Locomotives of Russia 1845 - 1955, V.A.Rakov
  10. ^ a b c d Holland, D.F. (1971). Steam Locomotives of the South African Railways. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 23–25, 52–54, 56, 90–91. ISBN 978-0-7153-5382-0.
  11. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 45. ISBN 0869772112.
  12. ^ "Dampfloki Club Herisau - Club". bt9.ch. Retrieved 7 April 2018.
  13. ^ "DBB | Dampf Bahn Bern".
  14. ^ "Geschichte". www.dampfgruppe-zuerich.ch. Retrieved 7 April 2018.
  15. ^ "Eb 3/5 5819". www.sbbhistoric.ch. Retrieved 7 April 2018.
  16. ^ www.chrisign.ch, chrisign gmbh, weinfelden. "Mostindien-Express - MThB - Verein Historische Mittel-Thurgau-Bahn". www.mthb.ch. Retrieved 7 April 2018.
  17. ^ Boddy et al. 1984, p. 69
  18. ^ Boddy, M. G.; Brown, W. A.; Hennigan, W.; Hoole, Ken; Neve, E.; Yeadon, W. B. (September 1984). Fry, E. V. (ed.). Locomotives of the L.N.E.R., Part 6C: Tender Engines—Classes Q1 to Y10. Kenilworth: RCTS. ISBN 0-901115-55-X.