Wikipedia

List of named alloys

(Redirected from Iron alloys)

This is a list of named alloys grouped alphabetically by base metal. Within these headings, the alloys are also grouped alphabetically. Some of the main alloying elements are optionally listed after the alloy names.

Alloys by base metal

edit

Aluminium

edit
Main article: Aluminium alloy

Aluminium also forms complex metallic alloys, like β–Al–Mg, ξ'–Al–Pd–Mn, and T–Al3Mn.

Beryllium

edit
Main article: beryllium

Bismuth

edit
Main article: Bismuth

Chromium

edit
Main article: Chromium

Cobalt

edit
Main article: Cobalt alloy

Copper

edit
Main article: Copper alloy

Gallium

edit
Main article: Gallium

Gold

edit
Main article: Gold alloy
See also notes below[note 1]

Indium

edit
Main article: Indium

Iron

edit
Main articles: Iron, Steel, Steel grades, and Carbon steel
See also: Category:Ferrous alloys

Most iron alloys are steels, with carbon as a major alloying element.

Lead

edit
Main article: Lead

Magnesium

edit
Main article: Magnesium alloy

Manganese

edit
Main article: Manganese
  • MN40, used in a foil for brazing
  • MN70, used in a foil for brazing

Mercury

edit
Main article: Amalgam (chemistry)

Nickel

edit
See also: Category:Nickel alloys

Plutonium

edit
Main article: Plutonium

Potassium

edit
Main article: Potassium

Rare earths

edit
Main article: Rare earth element

Rhodium

edit
Main article: Rhodium

Silver

edit
Main article: Silver

Titanium

edit
Main article: Titanium alloy

Tin

edit
Main article: Tin

Uranium

edit
Main article: Uranium

Zinc

edit
Main article: Zinc alloy

See also

edit

Notes

edit
  1. ^ The purity of gold alloys is expressed in karats, (UK: carats) which indicates the ratio of the minimum amount of gold (by mass) over 24 parts total. 24 karat gold is fine gold (24/24 parts), and the engineering standard[citation needed] is that it be applied to alloys that have been refined to 99.9% or better purity ("3 nines fine"). There are, however, places in the world that allow the claim of 24kt. to alloys with as little as 99.0% gold ("2 nines fine" or "point nine-nine fine).[citation needed] An alloy which is 14 parts gold to 10 parts alloy is 14 karat gold, 18 parts gold to 6 parts alloy is 18 karat, etc. This is becoming more commonly[citation needed] and more precisely expressed as a decimal fraction, i.e.: 14/24 equals .585 (rounded off), and 18/24 is .750 ("seven-fifty fine"). There are hundreds of possible alloys and mixtures possible, but in general the addition of silver will color gold green, and the addition of copper will color it red. A mix of around 50/50 copper and silver gives the range of yellow gold alloys the public is accustomed to seeing in the marketplace.[citation needed]

References

edit
  1. ^ Hunter, Christel (2006). Aluminum Building Wire Installation and Terminations Archived 2014-02-05 at the Wayback Machine, IAEI News, January–February 2006. Richardson, TX: International Association of Electrical Inspectors.
  2. ^ Hausner(1965) Beryllium its Metallurgy and Properties, University of California Press
  3. ^ "Ultimet® alloy - Nominal Composition". Haynes International. Archived from the original on October 5, 2016. Retrieved October 4, 2016.
  4. ^ Donald E. Kirby, D. A. O'Keefe, Thomas A. Sullivan(1972) [1], United States Department of the Interior
  5. ^ Mathias, Paul M. (15 March 1996). "Molecular modeling in engineering design and materials development". Fluid Phase Equilibria. 116 (1–2): 225–236. doi:10.1016/0378-3812(95)02891-9. Retrieved 11 July 2022.
  6. ^ "Retired Product".
Retrieved from "https://en.wikipedia.org/w/index.php?title=List_of_named_alloys&oldid=1228191738#Iron"