Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM) noted for its resistance to chemicals, temperature extremes, and ultraviolet light. It was a product of DuPont Performance Elastomers, a subsidiary of DuPont.[1] Hypalon as it is now known in the marine industry today is a remarketed version of the old Hypalon using an additional layer of neoprene (cr) so the new chemical formulation is csm/cr.[2]

Chemical structure

edit

Polyethylene is treated with a mixture of chlorine and sulfur dioxide under UV-radiation. The product contains 20-40% chlorine. The polymer also contains a few percent chlorosulfonyl (ClSO2-) groups. These reactive groups allow for vulcanization, which strongly affects the physical durability of the products. An estimated 110,000 tons/y were produced in 1991.[1]

Discontinuance

edit

DuPont Performance Elastomers announced on May 7, 2009, that it intended to close its manufacturing plant in Beaumont, Texas, by June 30, 2009. This was DPE's sole plant for CSM materials. The company was therefore exiting the business for Hypalon and its related product, Acsium.[3] The plant closure was delayed until April 20, 2010, in response to customer requests.

References

edit
  1. ^ a b Happ, Michael; Duffy, John; Wilson, G. J.; Pask, Stephen D.; Buding, Hartmuth; Ostrowicki, Andreas (2011). "Rubber, 8. Synthesis by Polymer Modification". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.o23_o05. ISBN 978-3527306732.
  2. ^ Hubbard, Don (1980). The Complete Book of Inflatable Boats. ProStar Publications. ISBN 978-0-930030-15-5.
  3. ^ Dupont Hypalon operations have ceased.