The US Model 1842 Musket was a .69 caliber musket manufactured and used in the United States during the 19th Century. It is a continuation of the Model 1816 line of muskets but is generally referred to as its own model number rather than just a variant of the Model 1816.
| Springfield Model 1842 | |
|---|---|
 Springfield Model 1842 Musket | |
| Type | Musket |
| Place of origin | United States of America |
| Service history | |
| In service | 1844–1865 |
| Used by | United States of America, Confederate States of America |
| Wars | American Indian Wars Mexican–American War, American Civil War |
| Production history | |
| Designed | 1842 |
| Manufacturer | United States Armory and Arsenal at Springfield, United States Armory and Arsenal at Harper's Ferry |
| Produced | 1844–1855 |
| No. built | 275,000 |
| Specifications | |
| Mass | 9.8 lbs (4.45 kg) |
| Length | 58 in (1,473 mm) |
| Barrel length | 42 in (1,067 mm) |
| Cartridge | Paper cartridge, musket ball undersized (.65/16,510 mm) to reduce the effects of powder fouling |
| Caliber | 0.69 in (17.526 mm) |
| Action | Percussion lock |
| Rate of fire | User dependent; usually 2 to 3 rounds every 1 minute |
| Muzzle velocity | 1400 feet per second (420 meters per second) |
| Effective firing range | 100–300 yards[1] |
| Maximum firing range | 400 yards[2] |
| Feed system | Muzzle-loaded |
| Sights | A front sight cast into the barrel band |
The Model 1842 was the last U.S. smoothbore musket. Many features that had been retrofitted into the Model 1840 were standard on the Model 1842. The Model 1842 was the first primary U.S. muskets to be produced with a percussion lock; however, most of the Model 1840 flintlocks ended up being converted to percussion locks before reaching the field. The percussion cap system was vastly superior to the flintlock, being much more reliable and much more resistant to weather.
Like all Model 1816 derivatives, the Model 1842 has a .69 caliber smoothbore barrel that was 42 inches (110 cm) in length. The Model 1842 had an overall length of 58 inches (150 cm) and a weight of ten pounds (4,5 kg).
A great emphasis was placed on manufacturing processes for the Model 1842. It was the first small arm produced in the U.S. with fully interchangeable (machine-made) parts. Approximately 275,000 Model 1842 muskets were produced, manufactured at the Springfield and Harper's Ferry armories between 1844 and 1855. Model 1842 muskets were also made by private contractors. However, these were few in number. Some were made by A.H. Waters and B. Flagg & Co, both of Millbury, Massachusetts. These were distinguished by having brass furniture instead of iron. A.H. Waters went out of business due to a lack of contracts in New England, and Flagg entered into a partnership with William Glaze of South Carolina. They relocated the machinery to the Palmetto Armory in Columbia, South Carolina. Instead of "V" over "P" over the eagle's head, these guns were usually stamped "P" over "V" over the palmetto tree. Most of the output of the Palmetto Armory went to the state militia of South Carolina. There were only 6,020 1842 type muskets produced on that contract and none were made there after 1853.
Like the earlier Model 1840, the Model 1842 was produced with an intentionally thicker barrel than necessary, with the assumption that it would likely be rifled later. As the designers anticipated, many of the Model 1842 muskets had their barrels rifled later so that they could fire the newly developed Minié ball. Tests conducted by the U.S. Army showed that the .69 caliber musket was not as accurate as the smaller bore rifled muskets. Also, the Minié Ball, being conical and longer than it was broad, had much more mass than a round ball of the same caliber. A smaller caliber Minié ball could be used to provide as much mass on target as the larger .69 caliber round ball. For these reasons, the Model 1842 was the last .69 caliber musket. The Army later standardized on the .58 caliber Minié Ball, as used in the Springfield Model 1855 and Springfield Model 1861.
Both the original smoothbore version and the modified rifled version of the Model 1842 were used in the American Civil War. The smoothbore version was produced without sights (except for a cast one on the barrel band). When Model 1842 muskets were modified to have rifled barrels, sights were usually added at the same time as the rifling.
The 1842 musket was effectively used during the American Civil War.[3]
See also edit
- List of individual weapons of the U.S. Armed Forces
- List of wars involving the United States
- Military history of the United States
- United States Army
- Confederate States Army
- Charleville musket
- Brown Bess
- Potzdam Musket 1723
- M1752 Musket
- Springfield musket
- Musket
- Rifle
- Carbine
- American Civil War reenactment
References edit
- ^ Stanage, Justin (2000). "The Rifle-Musket vs. The Smoothbore Musket, a Comparison of the Effectiveness of the Two Types of Weapons Primarily at Short Ranges". Iu South Bend Undergraduate Research Journal. 3: 84–89.
- ^ Stanage, Justin (2000). "The Rifle-Musket vs. The Smoothbore Musket, a Comparison of the Effectiveness of the Two Types of Weapons Primarily at Short Ranges". Iu South Bend Undergraduate Research Journal. 3: 84–89.
- ^ ".69 ball, buck and ball and buckshot cartridges of the U.S. Army Davide Pedersoli & C." www.davide-pedersoli.com. Archived from the original on 2014-07-06.
External links edit
- Article about M1842 Musket
- "Civil War Weapons and Equipment" by Russ A. Pritchard, Jr., Russ A. Pritchard Jr., Published by Globe Pequot, 2003
- http://www.nps.gov/spar/historyculture/sa-firearms-questions.htm Springfield Armory Weapons Research