Puget Sound and Pacific Railroad

      Puget Sound and Pacific Railroad PSAP Operations Map
      Reporting mark PSAP
      Locale Washington
      Dates of operation 1997–
      Track gauge 4 ft 8 12 in (1,435 mm) (standard gauge)
      Length 177 miles (285 km)[1]
      Headquarters Centralia
      Aberdeen, WA - rail yard 01

      The Puget Sound and Pacific Railroad (reporting mark PSAP) operates over 150 miles of track serving the U.S. State of Washington, and is headquartered in Centralia, Washington where interchanges with the BNSF Railway and Union Pacific Railroad are made.

      History

      The company began operations on August 30, 1997, when the line was purchased from the Burlington Northern and Santa Fe Railway (BNSF) by the ParkSierra Railgroup, which also formed the Arizona and California Railroad and the California Northern Railroad. The ParkSierra Railgroup was purchased in January 2002 by RailAmerica.[1] In 2012 RailAmerica was purchased by Genesee and Wyoming Inc with an STB approval in December 2012.

      The PSAP interchanges with BNSF Railway and Union Pacific Railroad near Centralia, Washington. From there, the line reaches west to Grays Harbor, Washington, and Northeast to Bangor, Washington, a total of nearly 80 miles (130 km). This line serves Naval Base Kitsap with its only rail connection to the rest of the North American rail network.

      Much of the line was originally constructed by the Puget Sound & Grays Harbor Railroad in 1890. The Northern Pacific Railway purchased this line from Summit, Washington, to Montesano shortly after the PS&GH started operations. The NP then completed a line from Centralia to Elma and from Montesano to Grays Harbor bringing rail service to Grays Harbor in 1892.

      ↑Jump back a section

      Operations

      The railroad's main commodities are timber products, garbage, as well as chemicals. In 2011 The Port of Grays Harbor saw a steady increase in business to do it being the only deep sea port near Seattle. The line from Centralia, Washington to Grays Harbor, Washington now has unit Grain, Soy Bean, Soda Ash, Auto, Garbage, and Military trains in addition to their regular local traffic. BNSF Railway and Union Pacific Railroad locomotive power are considered home on the PSAP as they run through on these unit trains to Grays Harbor, Washington for unloading. These run through trains are operated by PSAP crews. The PSAP hauled around 80,000 carloads in 2011.

      ↑Jump back a section

      Subdivisions

      Elma Subdivision

      The Elma Subdivision is the primary mainline for the Puget Sound and Pacific Railroad and is approximately 70 miles in length. The Elma Sub starts in Centralia, Washington, Milepost 5, and ends in Hoquiam, Washington, Milepost 75. This subdivision handles traffic to and from the Port of Grays Harbor including Grain, Auto, Soda Ash, Soybean, Garbage, Manifest, and local trains.

      Shelton Subdivision

      The Shelton Subdivision stretches from Elma, Washington to Shelton, Washington and is approximately 26 miles in length. The primary commodities on the Shelton Sub are lumber, garbage, and propane gas cars. The loaded lumber comes from the Simpson Timber Railroad, which is part of the Simpson Investment Company empire. Garbage comes from the Kitsap County, Washington Waste Management landfill located in Belfair, Washington. The garbage is loaded into container cars and is shipped via rail to a landfill in Arlington, Oregon. Propane is heavily used by Kitsap County, Washington residents in the Fall, Winter, and Spring months and comes in via rail for destinations in Shelton, Washington, Belfair, Washington, and Bremerton, Washington.

      Bangor & Bremerton Subdivisions

      The Bangor Subdivision stretches from Shelton, Washington to Bangor Base, Washington and is approximately 48 miles in length. Primary commodities are the same as the Shelton Subdivision with the addition of military and other U.S. Government traffic from Naval Base Kitsap in Bremerton, Washington and Bangor Base, Washington. At Bremerton Junction, Milepost 32.1 on the Bangor Sub, the line splits and the Bangor Subdivision continues Northwest to Silverdale, Washington and Bangor while the Bremerton Subdivision continues Northeast to Bremerton, Washington.

      ↑Jump back a section

      References

      1. ^ a b "RailAmerica's Empire". Trains Magazine (Kalmbach Publishing). June 2010. 
      ↑Jump back a section

      Read in another language

      This page is available in 1 language

      Last modified on 8 June 2013, at 08:58