||This article needs additional citations for verification. (March 2011)|
Gemology or gemmology is the science dealing with natural and artificial gems and gemstones. It is considered a geoscience and a branch of mineralogy. Some jewelers are academically trained gemologists and are qualified to identify and evaluate gems.
Rudimentary education in gemology for jewelers and gemologists began in the nineteenth century, but the first qualifications were instigated after the National Association of Goldsmiths of Great Britain (NAG) set up a Gemmological Committee for this purpose in 1908. This committee matured into the Gemmological Association of Great Britain (also known as Gem-A), now an educational charity and accredited awarding body with its courses taught worldwide. The first US graduate of Gem-A's Diploma Course, in 1929, was Robert Shipley who later established both the Gemological Institute of America and the American Gem Society. There are now several professional schools and associations of gemologists and certification programs around the world.
The first gemological laboratory serving the jewellery trade was established in London in 1925, prompted by the influx of the newly developed 'cultured pearl' and advances in the synthesis of rubies and sapphires. There are now numerous Gem Labs around the world requiring ever-more-advanced equipment and experience to identify the new challenges - such as treatments to gems, new synthetics and other new materials.
It’s mostly difficult to obtain the expert judgement from a neutral laboratory. Analysis and estimation in gemstone trade usually has to take place on site. Professional gemologists and gemstone buyers use mobile laboratories which pool all necessary instruments in a travel case. Such so called travel labs even have their own current supply which makes them independent from infrastructure. They are also suitable for gemological expeditions.
Gemstones are basically categorized based on of their crystal structure, specific gravity, refractive index, and other optical properties, such as pleochroism. The physical property of "hardness" is defined by the non-linear Mohs scale of mineral hardness.
Gemologists study these factors while valuing or appraising cut and polished gemstones. Gemological microscopic study of the internal structure is used to determine whether a gem is synthetic or natural by revealing natural fluid inclusions, and included partially melted exogenous crystals to demonstrate evidence of heat treatment to enhance colour.
The spectroscopic analysis of cut gemstones also allows a gemologist to understand the atomic structure and identify its origin as it is a major factor in valuing a gemstone.
For example, a ruby from Burma will have definite internal and optical activity variance as compared to a Thai ruby.
When the gemstones are in a rough state, the gemologist studies the external structure; the host rock and mineral association; and natural and polished colour. Initially, the stone is identified by its colour, refractive index, optical character, specific gravity, and examination of internal characteristics under magnification.
General identification of gems
Gem identification is basically a process of elimination. Gemstones of similar color undergo non-destructive optical testing until there is only one possible identity. Any single test is indicative, only. For example, the specific gravity of ruby is 4.00, glass is 3.15-4.20, and cubic zirconia is 5.6-5.9. So, one can easily tell the difference between cubic zirconia and the other two; however, there is overlap between ruby and glass.
And, as with all naturally occurring material(s), no two gems are identical. The geological environment they are created in influences the overall process so that although the basics can be identified the presence of chemical "impurities" and substitutions along with structural imperfections vary thus creating "individuals".
Identification by refractive index
One test to determine the gem's identity is to measure the refraction of light in the gem. Every material has a critical angle, at which point light is reflected back internally. This can be measured and thus used to determine the gem's identity. Typically, this is measured using a refractometer although it is possible to measure it using a microscope.
Identification by specific gravity
Specific gravity, also known as relative density, varies depending upon the chemical composition and crystal structure type. Heavy liquids with a known specific gravity are used to test loose gemstones.
Specific gravity is measured by comparing the weight of the gem in air with the weight of the gem suspended in water.
Identification by spectroscopy
This method uses a similar principle to how a prism works to separate white light into its component colors. A gemological spectroscope is employed to analyze the selective absorption of light in the gem material. Essentially, when light passes from one medium to another, it bends. Blue light bends more than red light. Depending on the gem material, it will adjust how much this light bends. Coloring agents or chromophores show bands in the spectroscope and indicate which element is responsible for the gem's color.
Institutes, laboratories, schools and publications
- Institutes and laboratories
- American Gem Society - AGS
- Canadian Gemmological Association - CGA
- Canadian Institute of Gemmology - Cigem
- European Gemological Laboratory (USA) - EGL USA
- Gemmological Association of Great Britain - Gem-A
- Gemological Institute of America - GIA
- Gemmology Institute of Southern Africa - GISA
- Gemological Science International
- International Gemological Institute - IGI
- HKD Diamond Laboratories (Canada) Pvt.Ltd. - HKD
- Swiss Gemmological Institute - SSEF
- gci gemological centers- GCI
- Indian Institute of Gemmology - IIG
- Gemmological Institute of India - GII
- gemological Institute of Romania - GIR
|Wikimedia Commons has media related to: Diploma in Basic Techniques of Jewellery|