File:SSPF factory floor view with modules.jpg

Size of this preview: 800 × 532 pixels. Other resolutions: 320 × 213 pixels | 640 × 426 pixels | 1,024 × 681 pixels | 1,280 × 851 pixels | 3,008 × 2,000 pixels.

Original file ‎(3,008 × 2,000 pixels, file size: 2.23 MB, MIME type: image/jpeg)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Description	English: A beautiful overview of several International Space Station modules and machines as they sit in manufacturing stands inside the Space Station Processing Facility high bay factory floor area.
Date	Taken on 29 March 2007, 09:53:23
Source	https://www.nasa.gov/image-detail/amf-ksc-07pd-0735/
Author	Creator:George Shelton NASA KSC, retouched and enhanced by John Chryslar

Licensing

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

This image or video was catalogued by Kennedy Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: KSC-07PD-0735.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.

Other languages:

العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:59, 3 August 2021		3,008 × 2,000 (2.23 MB)	Raphael.concorde	Uploaded a work by NASA KSC from https://mediaarchive.ksc.nasa.gov/#/Detail/358 with UploadWizard

File usage

The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Global file usage

The following other wikis use this file:

Usage on es.wikipedia.org
- Evaluación de opciones reales

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Image title	Several components for delivery to the International Space Station sit in test stands inside the Space Station Processing Facility highbay. To the right, from back to front, are the Japanese Experiment Module, the Raffaello multi-purpose logistics module, and the European Space Agency's Columbus scientific research module. To the left in front is the starboard truss segment S5. Behind it is the test stand that will hold the Experiment Logistics Module Pressurized Section for the Japanese Experiment Module. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.
Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D100
Author	NASA
Copyright holder	For copyright and restrictions refer to http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/13 sec (0.076923076923077)
F-number	f/7.1
Date and time of data generation	09:53, 29 March 2007
Lens focal length	26 mm
Credit/Provider	NASA/George Shelton
Source	Digital Still Image
Short title	Japanese Experiment Module arrival
Usage terms	Public News Released Image
Orientation	0
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop CS Windows
File change date and time	00:36, 15 March 2020
Exposure Program	Manual
Exif version	2.2
Date and time of digitizing	09:27, 30 March 2007
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
Shutter speed	3.7004399975891
APEX aperture	5.6556380002433
Exposure bias	0
Maximum land aperture	4 APEX (f/4)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, strobe return light detected
DateTimeOriginal subseconds	063
DateTimeDigitized subseconds	063
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	39 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Soft
Subject distance range	Unknown
Special instructions	AFS 1382/54,05252027
Keywords	JEM STS-123
Contact information	KSC, ,
Sublocation of city shown	SSPF
IIM version	2

File:SSPF factory floor view with modules.jpg

Summary

Licensing

Captions

Items portrayed in this file

depicts

manufacturing

worker

engineer

International Space Station

electronic component

factory

Space Station Processing Facility

captured with

Nikon D100

exposure time

0.07692307692307692307 second

f-number

7.1

focal length

26 millimetre

File history

File usage

Global file usage

Metadata