The crooked knife sometimes referred to as a "curved knife", "carving knife," or "mocotaugan," from the Cree term "môhkotâkan," is a woodworking knife, typically with a curved end. The crooked knife is a common tool found amongst the native Americans of the Eastern Woodlands as well as non-native woodworkers. The crooked in "crooked knife" refers to its unusual shape with the handle set at an oblique angle to the blade. The blade can be straight or curved, long or short and can be made of a steel forged specifically for the knife, or from reused hardened steel from another source. The shape of the blade, whether curved or straight, is a function of the carving purpose of the user: straight for whittling wood, making splints for baskets and incising, curved for hollowing out bowls and masks and ladles, as well as myriad other usages.

The 1971 documentary César et son canot d'écorce (César's Bark Canoe) illustrates the use of a crooked knife in the construction of a birch-bark canoe.[1]

Description and Usage edit

 
Crooked Knife

John McPhee states, "The blade was bent near its outer end (enabling it to move in grooves and hollows where the straight part could not). The grip, fashioned for convenience of a hand closing over it, was bulbous. The blade had no hinge and protruded rigidly — but not straight out. It formed a shallow V with the grip."[2]

Adney and Chapelle state, "The knife, held with the cutting edge toward the user, was grasped fingers-up with the thumb of the holding hand laid along the part of the handle projecting away from the user. This steadied the knife in cutting. Unlike a jackknife, the crooked knife was not used to whittle but to cut toward the user, and was, in effect, a one-hand drawknife."[3]

According to Henri Vaillancourt, "The original crooked knife was made out of a beaver's tooth."[2]

References edit

  1. ^ Gosselin, Bernard (director) (1971). César et son canot d'écorce [César's Bark Canoe] (documentary film) (in French, English, and Atikamekw). Event occurs at 20:40 (use in making trunnels), 25:50 (use in making thwarts), 37:00 (use in making canoe frames (ribs)), 53:00 (use in shaping paddle).
  2. ^ a b McPhee, John (1992). The Survival of the Bark Canoe. New York: The Noonday Press. pp. 14–16. ISBN 9780374516932.
  3. ^ Adney, Edwin; Chapelle, Howard (1964). "The Bark Canoes and Skin Boats of North America". Project Gutenberg. Smithsonian Institution. pp. 21–24. Retrieved 1 May 2021.

Further reading/external links edit